On Sale! 3M Dynatel 965AMS ADSL2+ Service Module Model 965-AMS ADSL2+ 3M Dynatel ADSL2

3M Dynatel 965AMS-ADSL2+ Service Module

The ADSL2+ Service Module can be configured for four different transport types: EoA (Ethernet over ATM), IPoA (Internet Protocol over ATM), PPPoE (Point to Point Protocol over Ethernet) and PPPoA (Point to Point Protocol over ATM). PPPoE & PPPoA require a username and password.

The module can also use two different address modes: DHCP and Static IP. Static IP requires entering the local IP, subnet mask and default gateway information.

Advanced Operations include Ping and Thru Mode. These operations require entering the ADSL2+ Service Moduleﾒs Wide Area Network (WAN) and Local Area Network (LAN) information and Ping settings

Dynatel 965AMS Advanced Modular System

The Dynatel 965AMS system contains every feature of our previous 965 model plus a larger, brighter display that features 3MTM VikuitiTM Display Enhancement technology, a user-friendly icon-based interface and rugged field-swappable modules.* These external modules can be shared between technicians and allow transmission testing of a variety of OSP technologies.

This microcomputer-controlled flexible test set family provides full-featured testing for the triple playﾗvoice, video and data circuits. Because itﾒs a Dynatel 965 series tester, the AMS model is easy to use, requiring minimal training for testing professionals. And because it emphasizes fault diagnosis and fault location, customer problems can be solved quickly.

Benefits

Communications
Capability to work with a PC or handheld computer supporting software upload and data downloads
Flexible architecture
Supports various data modem protocols such as ADSL2+
Graphical user interface
User-friendly, icon-based display of test results
Help function
An internal help and tutorial provides information as needed during operation
Backlight
High resolution/high contrast black and white LCD display
Vehicle power adapter
Plugs into standard vehicle accessory outlet
Windows/CE operating system
Provides open architecture software environment
Allows rapid access to twelve different "blue key" functions, reducing menu levels. Also has cursors, and supports alpha-numeric entry
Yellow and green LED lights
Signal battery state and communication status
Software
TDR and auto-test knowledge based systems aids technicians during test interpretation
Bright big screen
Highly visible even in bright sunlight due to proprietary 3Mﾙ Vikuitiﾙ brightness enhancement technology, 80% larger than 965DSP
Modular design
All you need is a new module to increase test capability (no need to replace test set)
Dynatel yellow

Rugged, dependable

AUTOTEST

The knowledge-based smart autotest function is the product of more than a hundred years of Dynatel team experience. It allows an automatic test of active and inactive lines with pass/fail limits. Autotest capabilities also include expert system analysis of test results with advice on how to repair or how to locate faults. 3Mﾙ Dynatelﾙ Far End Device FED II and customizable selections of tests are supported by the autotest feature of the 965AMS platform.

EXTERNAL MODULES

The 3Mﾙ Dynatelﾙ Advanced Modular System 965AMS modules are field swappable, testing the exact digital transmission modem needed for each job. The module supports special circuits technicians who work on a variety of circuit standards during a typical day. Because the modules are field swappable, the technicians can share them. So itﾒs no longer necessary to buy a separate testing platform for each set of modules.

RUGGED, WEATHER-RESISTANT DESIGN

The hand-held 965AMS product is housed in a lightweight, ergonomically-designed case for portability and ease of handling. The unit is weather-resistant and weighs only 5 lbs (2.2kg). The unit operates on a desktop, on the ground, up in an aerial environment and in underground locations.

GENERAL SPECIFICATIONS

Drop test	Survives 3 ft (1 m) drop onto concrete, (survives 5 ft drop onto concrete with soft case) using ASTM D4169 assurance level I method 5276
Vibration	Meets Mil 810F method 514.5
Water, dust and chemical proof	Meets IP65 per IEC 529(1989) for rain and dust Immersion test IP67 0.15 m deep
Emissions	Standards meet FCC part 15, class A: Digital Devices for the US, and EN55022 (radiated emissions)
Built to ISO9001/2000 certification for manufacturing facilities and TL 9000 compliant
Built to ANSI/IPC A610-C manufacturing standards
Language	English, Spanish, and French Canadian*
Units	Feet or meters, Fahrenheit or Celsius, dBrnC or dBm0p, m/uS or Vp
Battery	Rechargeable battery pack or alkaline, 9 hours typical use (50% on/off measures voltage)
Display	4.1" x 3.1"(104 x 79 mm), 320 x 240 pixel resolution, high visibility in bright sunlight due to 3MTM VikuitiTM film technology
Stored results (All Results)	100 results total of all types maximum

For full 3M Dynatel 965AMS ADSL2 Module product specifications, please click here: 3M Dynatel 965AMS ADSL2 Module

Additional Information

3M Dynatel 965AMS ADSL2+ Service Module For 965AMS Advanced Modular System Tester

This Sale Is For The ADSL2+ Module Only.
(965AMS Testing Mainframe Not Included In Sale!)

The ADSL2+ Service Module can be configured for four different transport types: EoA (Ethernet over ATM), IPoA (Internet Protocol over ATM), PPPoE (Point to Point Protocol over Ethernet) and PPPoA (Point to Point Protocol over ATM). PPPoE & PPPoA require a username and password

965 AMS 965AMS ADSL2 ADSL2+

3M Dynatel 965AMS ADSL2+ 965-AMS ADSL2+ Service Module Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 36136-L/T*

Included