|
Combining the CSM1-2 optical power meter, CSS1-MM Dual LED light source, and
CSS1- SM Dual LASER source, the CKSM-2 is a cost-effective test kit designed for
performing insertion loss measurements on multimode as well as single-mode fi
ber optic links.
The CSS1-MM and CSS1-SM sources feature Dual output, 850 /1300 nm LED or
1310/1550 nm LASER respectively, from a single output port. Both CSS1 models
offer 2 modes of operation, continuous wave (CW) and user selectable modulated
Tone. The CSS1-MM LED and CSS1-SM LASER output ports are stabilized to ensure
accurate test results per current TIA/EIA requirements. An easy to read LCD
display with Backlight shows emitted wavelengths [nm], tone frequency [Hz], and
Low battery condition. The CSS1-MM model output port is equipped with a fi xed
SC connector while the CSS1-SM output port is equipped with Universal Connector
Interface (UCI) base and SC adapter.
The CSM1-2 optical power meter operates at 850/ 1300/ 1310/ 1550 nm and
features multiple test Tone detection for fi ber identifi cation. The CSM1-2
stores optical references for each calibrated wavelength. An easy to read LCD
display with Backlight shows measured power [dBm or µW] or insertion loss [dB],
calibrated wavelengths, tone frequency [Hz], and Low battery condition. The CSM1
optical input port accepts Noyes thread-on style adapter caps. One adapter cap,
2.5 mm Universal, is included. A variety of Noyes thread-on style adapter caps
(FC, SC, LC, etc.) may be ordered separately.
Weighing only 0.4 lb each, units are compact and convenient for fi eld use.
The CSS1-MM Dual LED light source, CSS1-SM Dual LASER source, and CSM1-2 optical
power meter are fully N.I.S.T. traceable.
Features:
- Palm-sized, rugged, lightweight
- Certify multimode fiber links per TIA/EIA standards
- CW and modulated Tone
- 270, 330, 1000, and 2000 Hz supported Tone
- Power measurements in dBm or µW; insertion loss in dB
- Reference power level storage
- Large LCD with Backlight
- AA alkaline, optional NiMH or NiCd
- Automatic power-off function
- Battery Gauge
- Free 50 µm and 62.5 µm mandrels
- Cost-effective, easy to use
- N.I.S.T traceable
CSS1-MM Specifications
| Optical |
CSS1-MM (single port) |
| Output wavelength |
850 nm ±20 nm |
1300 nm +40/-60 nm |
| Spectral width (max) |
35 nm |
170 nm |
| Output power |
-20.0 dBm into 62.5/125 fiber |
| Laser classification |
Class 1 (IEC 60825 - 1) |
| Stability |
± 0.1 dB over 1 hour (after 30 sec. typically)
±
0.15 dB over 8 hours (after 30 sec. typically) |
| Display type |
Liquid Crystal Display w/LED Backlight |
| Power |
2 x AA batteries, optional NiMH or NiCd |
| Battery life |
30 hours typical (with 2 x AA Alkaline) |
| Output connector |
SC |
| Operating temperature |
-10 to 50°C, 90% RH (non-condensing) |
| Storage temperature |
-30 to 60°C, 90% RH (non-condensing) |
| Size (H x W x D) |
4.2 x 2.5 x 1.25 in (10.7 x 6.4 x 3.2 sm) |
| Weight |
0.4 lb (0.18 kg) |
CSS1-SM Specifications
| Optical |
CSS1-SM (single port) |
| Output wavelength |
1310 nm ±20 nm, 1550 nm ±20 nm |
| Spectral width (max) |
5 nm |
| Output power |
0.0 dBm into 9/125 fiber |
| Laser classification |
Class 1 (FDA 21 CFR 1040.10 and 1040.11, and IEC 60825-1) |
| Stability |
± 0.05 dB typical over 1 hour (after 30 sec.) ± 0.15 dB over 8 hours
(after 30 sec. typically) |
| Display type |
Liquid Crystal Display w/LED Backlight |
| Power |
2 x AA batteries, optional NiMH or NiCd |
| Battery life |
75 hours typical (with 2 x AA Alkaline) |
| Output connector |
UCI base and FC, SC, ST, or LC adapter |
| Operating temperature |
-10 to 50°C, 90% RH (non-condensing) |
| Storage temperature |
-30 to 60°C, 90% RH (non-condensing) |
| Size (H x W x D) |
4.2 x 2.5 x 1.25 in (10.7 x 6.4 x 3.2 sm) |
| Weight |
0.4 lb (0.18 kg) |
CSM1-2 Specifications
| Optical |
CSM1-2 |
| Calibrated wavelength |
850, 1300, 1310, 1550 nm |
| Detector type |
Germanium (Ge) |
| Measurement range |
+6 to -60 dBm |
| Tone detect range |
+6 to -50 dBm +6 to -45 dBm for 850 nm |
| Accuracy |
± 0.3 dB* |
| Resolution |
0.01 dB |
| Measurement units |
dB, dBm, ěW |
| Display Type |
Liquid Crystal Display w/LED Backlight |
| Fiber Type |
Single-mode/ Multimode |
| Power |
2 x AA batteries, optional NiMH or NiCd |
| Battery life |
> 300 hours (with 2 x AA Alkaline) |
| Operating temperature |
-10 to 50°C, 90% RH (non-condensing) |
| Storage temperature |
-30 to 60°C, 90% RH (non-condensing) |
| Size (H x W x D) |
4.2 x 2.5 x 1.25 in (10.7 x 6.4 x 3.2 sm) |
| Weight |
0.4 lb (0.18 kg) |
|
