|
NOYES Fiber Test Kit SM MM-OPM4 MM-OLS1 SM-OLS2
FEATURE 1 :
NOYES OPM4
Fiber Optic Power Meter :
SPECIFICATIONS :
Optical :
*Calibrated wavelengths: 850, 980, 1310,
1480, 1550, + 1625nm
*Detector type: Filtered InGaAs
*Measurement range:
+26 to -50 dBm
*Tone detect range: +6 to -30 dBm; +6 to -25 for 850
nm
*Wavelength ID range: +6 to -30 dBm; +6 to -25 dBm for 850
nm
*Accuracy: ± 0.25 dB
*Resolution: 0.01 dB
*Measurement units: dB,
dBm, ?W
General :
*Power: 9V Battery
*Battery life: 60 hrs.
*Operating
temperature: -10 to 50°C, 90% RH (non-condensing)
*Storage temperature: -30
to 60°C, 90% RH (non-condensing)
*Size (H x W x D): 14.0 x 8.1 x 3.8 cm (5.5
x 3.2 x 1.5 in)
*Weight: 0.26 kg (0.58 lb)
FEATURE 2 :
NOYES OLS1 MULTIMODE Dual Optical Light Source
:
The OLS1 features 850 and 1300 nm LED output from a single output
port and is easy to operate with only a power button and a wavelength select
button. Each wavelength may be transmitted individually at CW or with Wave ID.
When transmitting with Wave ID, the OLS1 supports transmitting pairs of
wavelengths in an alternating pattern. Associated with each operating condition,
the designated LED indicator will illuminate to identify the currently enabled
operating mode and emitted wavelength(s) along with battery charge status and
external power presence. The OLS1 output port is equipped with UCI based
removable adapters to allow the output connectors to be inspected and
cleaned.
SPECIFICATIONS :
Optical
:
*Wavelength: 850 ±30 nm; 1300 +50/-10 nm
*Emitter type: LED, Class I
(IEC 60825 - 1)
*Spectral width: 40 nm (typ); 120 nm (typ)
*Output power:
>-20 dBm*
*Output stability: ± 0.1 dB over 8 hours (after 5 min.
warm-up)
*Fiber size: 62.5 um
General :
*Power: 2 x AA batteries, optional AC adapter
*Battery life:
Typical 30 hours, minimum 20 hours
*Operating temperature: -10 to 50°C, 90%
RH (non-condensing)
*Storage temperature: -30 to 60°C, 90% RH
(non-condensing)
*Size (H x W x D): 14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5
in)
*Weight: 0.29 kg (0.65 lb)
FEATURE 3 :
NOYES OLS2 SINGLEMODE Dual Optical Light Source :
The OLS2-Dual laser source is a cost-effective, rugged, handheld instrument
designed for performing insertion loss measurements on single-mode fiber optic
links when used with an optical power meter.
When paired with an optical fiber identifier, the OLS2-Dual may be used for
fiber identification. The LASER output is stabilized to ensure accurate test
results per current TIA/EIA requirements.
The OLS2-Dual features 1310 nm and 1550 nm LASER output from a single output
port and is easy to operate. This light source offers 4 modes of operation: Dual
wavelengths sending ID, single wavelength sending ID, CW, and modulated Tone.
[Active Output], [Tone], [Battery], and [External Power] indicators identify the
currently enabled operating mode, battery charge status, and external power
presence.
The OLS2-Dual output port is equipped with a UCI based removable adapter to
allow the output connector to be inspected and cleaned.
In addition to being powered by two AA alkaline batteries, the OLS2-Dual can
be powered by optional AC adapter and/or rechargeable NiMH battery pack. The
OLS2-Dual is fully N.I.S.T. traceable.
FEATURES :
• Rugged, handheld, lightweight
• Dual wavelengths from a
single port
• Certify single-mode links per TIA/EIA standards
• Dual Wave
ID, single Wave ID, CW, and modulated Tone
• 270 Hz, 330 Hz, 1 kHz, and 2 kHz
supported Tone (2 kHz default)
• AA alkaline, optional rechargeable NiMH
battery pack or AC adapter
• Long battery life
• Low battery
indicator
• Adjustable output
• Cost-effective, easy to use
• N.I.S.T.
Traceable
APPLICATIONS :
• The OLS2-Dual may be substituted for terminal equipment
in the central office or head end to provide a stable output for loss
measurements.
• For single-mode applications, such as Telecom or CATV, the
OLS2-Dual may be coupled with an optical power meter as a test kit to perform
optical loss tests at 1310 and 1550 nm.
• In the modulation Tone mode, the
OLS2-Dual generates a Tone signal into the fiber. This signal can be detected by
an OFI-200(not included) optical fiber identifier, to isolate specific fibers in
a bundle prior to splicing or rerouting.
SPECIFICATIONS :
Optical :
*Output wavelength (nm) 1310 ±20
1550
±20
*Output power 0 dBm*
*Laser classification Class 1 (FDA 21 CFR
1040.1
and 1040.11, and IEC 60825-1)
*Output connector ST
*Spectral
width (FWHM) 5 nm (max)
*Stability ± 0.05 dB over 1 hour (after 15 min.
warm-up)
± 0.1 dB over 8 hours (after 15 min. warm-up).
General :
*Power 2 x AA batteries, optional NiMH or AC adapter
*Battery
life (2 x AA) Typical 120 hours, Minimum 75 hours
*Operating temperature -10
to 50°C, 90% RH (non-condensing)
*Storage temperature -30 to 60°C, 90% RH
(non-condensing)
*Size (H x W x D) 5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8
cm)
*Weight 0.65 lb (.29 kg)
INCLUDED :
(1) NOYES OPM4 850
980 1310 1480 1550 + 1625nm Optical Power Meter
(1) NOYES OLS1 850nm + 1300nm
MM Dual Optical Light Source
(1) NOYES OLS2 1310nm + 1550nm SM Dual Optical
Light Source
(1) Interchangable ST Connector for OPM4
(1) ST to ST
Fiber Patch Cable - MM
(1) ST to SC Fiber Patch Cable - SM
Manual On
CD-ROM
Carrying Case
| 
