4P14 - NOYES OPM4 OLS2 DUAL SM Fiber Test Set w/ Scope
This test kit combines the OPM4-4D optical power meter and OLS2-Dual LASER light source and is ideally suited for testing single-mode fiber optic networks.
The OLS2-Dual features 1310 nm and 1550 nm LASER output from a single output port and offers several modes of operation. Each wavelength may be transmitted individually at CW or with user selectable modulated Tone. Also, each wavelength may be transmitted with Wave ID. When transmitting with Wave ID, the OLS2-Dual supports transmitting pairs of wavelengths in an alternating pattern. Associated with each operating condition, the designated LED indicator will illuminate to identify the currently enabled operating mode and emitted wavelength(s) along with battery charge status and external power presence. The OLS2-Dual output port is equipped with a UCI based removable adapter to allow the output connector to be inspected and cleaned.
The OPM4-4C features multiple test Tone detection for fiber identification and stores optical references for each calibrated wavelength. A large dual-wavelength LCD display with backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths [nm], tone signal [Hz], and wavelength ID. The OPM4-4C optical input port accepts a variety of Noyes thread-on style adapter caps (ordered separately) to meet a wide range of testing requirements.
Features: • Handheld, rugged, lightweight • Wave ID (auto identification & switching) • Dual or single Wave ID, CW, Tone • 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone • Adjustable output • Large LCD • Power measurements in dBm or ?W; insertion loss in dB • Reference power level storage • Low battery indicator • Long battery life with 1 9V Battery • Cost-effective, easy to use • N.I.S.T traceable
OLS2-Dual Specifications
Optical Wavelength: 1310 ±20 nm; 1550 ±20 nm Emitter type: Laser, Class I (FDA 21 CFR 1040.10 and 1040.11, and IEC 60825-1) Spectral width (FWHM): 5 nm (max) Output power: 0 dBm* Output stability: ± 0.05 dB over 1 hour (after 15 min. warm-up); ± 0.1 dB over 8 hours (after 15 min. warm-up) Tone output: 270 Hz, 330 Hz, 1 kHz, 2 kHz
General Power: 1 9V Battery, optional AC adapter Battery life: Typical 120 hours, minimum 75 hours Adapter: FC Operating temperature: -10 to 50°C, 90% RH (non-condensing) Storage temperature: -30 to 60°C, 90% RH (non-condensing) Size (H x W x D): 14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in) Weight: 0.29 kg (0.65 lb)
OPM4-4C Specifications
Optical Calibrated wavelengths: 980, 1310, 1490, 1550, 1625 nm Detector type: Filtered InGaAs Measurement range: +26 to -50 dBm Tone detect range: +6 to -30 dBm; +6 to -25 for 850 nm Wavelength ID range: +6 to -30 dBm; +6 to -25 dBm for 850 nm Accuracy: ± 0.25 dB Resolution: 0.01 dB Measurement units: dB, dBm, ?W
General Power: 9V Battery Battery life: 60 hrs. Operating temperature: -10 to 50°C, 90% RH (non-condensing) Storage temperature: -30 to 60°C, 90% RH (non-condensing) Size (H x W x D): 14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in) Weight: 0.26 kg (0.58 lb)
NOYES OFL 300-200B Optical Fiber Scope
The OFS 300 is a versatile instrument for the inspection of optical fiber connectors. By employing universal adapter cap mount, it can inspect virtually any connector style for scratches, dirt, or other problems normally associated with poor transmission performance. The OFS 300 offers 60 hours of continuous battery life. A 2.5mm universal adapter cap, holster, and user's guide are included with OFS 300 scopes.
Two models of the OFS 300 are available. The OFS 300-200B offers precision 200X magnification to easily inspect both multimode and single-mode fi ber optic connectors. The OFS 300-400C with 400X magnification is available for more critical inspection during termination, especially with single-mode fibers.
Various adapter caps are available to facilitate viewing of the desired connector style. The OFS 300-200B uses the same common threaded connector adapter caps as the Noyes Optical Power Meters and Loss Test Sets. The OFS 300-400C utilizes special precentered snap-in adapter caps, which ensure proper fiber location in the viewing area.
Features • Rugged handheld design • 200X, 400X, or 200-400X zoom • Universal adapter interface • Laser safety filter installed* • Tripod mount
General Specifications Operating temperature: 0 to +50°C Storage temperature: -20 to +50°C Power: 1 9V Battery Weight in use: 1.5 lbs. (0.67 kg) Size (H x W x D): 5 x 2 x 8 in. (13 x 5 x 20 cm)
Included: * NOYES OPM4 Meter (Model # OPM4-4C) * NOYES OLS2 Dual SM Light Source (Model # LS2D) * NOYES OFS 300-200B Optical Fiber Scope * (2) SM Fiber Patch Cables * (1) Fiber Connector * Manual on CD-ROM * Carrying Case
