|
NOYES SLP 6-3 SM Fiber Optic Test Kit :
FEATURING THE :
NOYES OPM6 - Optical Power Meter - 850nm , 1300nm ,
1310nm + 1550nm
&
NOYES OLS6 - Dual Wavelength - 1310nm + 1550nm -
Optical Light Source :
&
NOYES OFI-200 Optical Fiber Identifier
:
&
EXFO FLS-235B Pocket Pal Fault Locator :
Noyes Fiber Systems' OFI 200B Optical Fiber Identifier :
is a low-cost,
high-technology approach to non-invasive fiber optic signal detection. Using a
low-insertion loss, macro-detection technique, this device accurately
discriminates fiber optical signals without disrupting service or overstressing
the fiber. During installations, cutovers, maintenance and restoration, the OFI
200B is used to identify optical fibers carrying normal traffic, a 2-kHz tone or
if no signal is present (dark).
The OFI 200B uses a sophisticated detection scheme which allows for a
gradual, short-length bending of the fiber under test. This technique ensures
low stress (<100 kpsi max) and low insertion loss (0.5 dB typical @ 1300 nm)
while providing sensitive signal detection.
Device measures 1.1" x 1.5" x 8.5" and weighs 10 ounces with 9-volt alkaline
battery.
INCLUDES :
*Noyes OFI-200B Optical Fiber Identifier
*Soft Carrying
Case
The EXFO FLS-235B Pocket Pal Fault Locator Features :
* Bright red
laser at 635 or 670 nm
* Pulsed and continuous operation
* 80 hours of
operation in flashing mode (typical)
* Standard AA alkaline batteries
*
Rugged and weatherproof
* FC, ST, or SC connector
* Compliant with
Bellcore TR-NWT-001319 optical power requirements
Easy to use :
The Pocket Pal is the easiest way to identify fibers from
end to end and polished connector end faces. Its red laser shines through most
yellow-jacketed fibers to help you pinpoint breaks, bends, faulty connectors,
splices, and other causes of signal loss. It has a reach of up to 5 km*. The
convenient FLS-235B locates faults visually by creating a bright red glow at the
exact location of the fault on singlemode or multimode fibers.
Easy on your budget :
Priced to accommodate the tightest budgets, the
FLS-235B Pocket Pal is a truly affordable way to locate faults in OTDR dead
zones. Its effectiveness justifies purchasing one for just about every fiber
technician.
Specifications:
* Operation: CW/1 Hz
* Wavelength (nm): 635 ±10
*
Emitter type: laser
* Power output (typical) (mW): 0.80
* Distance range:
5 km / 3 mi.
INCLUDED :
NOYES OPM6 850 1300 1310 + 1550nm Optical Power Meter
NOYES
OLS6 1310nm + 1550nm Dual SM Optical Light Source
NOYES OFI-200 Optical Fiber
Identifier
EXFO FLS-235B Pocket Pal Fault Locator
(1) Interchangable SC
Connector for OPM6
(1) Interchangable FC Connector for OPM6
Fiber
Clean-Connector Cleaning System
(1) SC to SC Fiber Patch Cable - SM
(1) FC
to FC Fiber Patch Cable - SM
(1) FC to SC Fiber Patch Cable - SM
(1) RS232
DIN PC Interface Cable
Hard Copy Manual for FLS-235B
(1) FC - FC Fiber
Connector
(1) FC - SC Fiber Connector
(1) SC - SC Fiber Connector
NOYES
WINTEST Software
Carrying Case for Entire Kit
Soft Case for
FLS-235B
Hard Copy Manual
| 
