|
FST-2802 Gigabit Ethernet Services Module
The FST-2802 is a handheld Ethernet, Fibre Channel, and IP services test
instrument designed to meet the needs of service providers for turning up and
troubleshooting these various services. The FST-2802 enables technicians to use
one test set to turn up services ranging from 10/100 Ethernet, Gigabit Ethernet,
Fibre Channel, and IP - all from a single TestPad module!
Highlights
- Full line rate traffic generation with variable traffic load
characteristics to stress test 10/100/1000 Mbps Ethernet interfaces.
- Ability to test 1.0625 and 2.125 Gbps Fibre Channel services at 100% wire
speed.
- IP ping and traceroute testing for verification of network connectivity.
- Ability to perform IP throughput verification and round trip delay
testing.
- Filtering capabilities at L2 and L3 enable users to perform circuit
troubleshooting.
- Dual-port capability for Ethernet and Fibre Channel traffic generation.
- BER testing at layer 1 and layer 2 for Ethernet and Fibre Channel
circuits.
- Loopback frame generation to automatically loop the far-end test at L2 and
L3.
- Remote graphical user interface (GUI) application for remote testing via
an analog modem, Ethernet LAN, 802.11, or Bluetooth.
- Custom and preconfigured test scripts ensure that M&Ps are followed.
Applications
- Service level agreement (SLA) verification via throughput, frame loss, and
round trip delay testing for Ethernet, Fibre Channel, and IP services.
- Automated RFC-2544 conformance testing.
- Traffic testing with VLAN 802.1Q, 802.1p, DSCP, and TOS prioritization
characteristics.
- Ping and traceroute testing for verification of network connectivity.
- Simultaneous testing of two independent circuits with full line rate
traffic generation.
Key Features
- Microsoft Windows XP platform with easy-to-use GUI.
- Variety of applications such as web browser, PDF reader, and online
keyboard.
- File transfer protocol (FTP) for storage and transfer of results.
- Connectivity methods include RS-232, USB, LAN, Bluetooth, 802.11b, and
analog modem.
FST-2000 TestPad Mainframe
The FST-2000 TestPad is the user interface for the TestPad family. The
combination of a user interface and an application module represents a complete
test tool. This architecture provides TestPad users with the flexibility to
invest in additional test modules as their testing needs change, allowing them
to capitalize on an investment already made.
The FST-2000 has been designed for mobile technicians to improve the overall
installation and troubleshooting process by providing features that are enablers
for a total process improvement solution. The FST-2000 employs wireless
connectivity, along with a local Web Browser and VT100, allows for storage and
transfer of files, all of which enable field technicians to complete their jobs
more effectively.
Features:
- Remote control via Web Browser makes remote testing and technical support
straightforward
- Web Browser and VT100 emulator provide access to provisioning systems,
while
- Web Browser also allows for retrieval of information from the
Intranet/Internet
- Support of Bluetooth, RS-232, USB-compatible and 10/100BaseT interfaces
provide a choice of local connectivity to the TestPad
- Support of Ethernet, 802.11b, analog and wireless modems (CDPD, CDMA,
etc.) allow for various LAN and WAN connectivity options
- Customizable and preconfigured test scripts offer support for closeout
tests, ensuring that M&Ps are followed
- Storage and transfer of results provide ability to store files on the test
set and transfer them to computers and other network locations via file
transfer protocol (FTP)
- Non-display version offers a lower cost solution for customers that want
to rely on laptop’s display for test configuration and retrieval of results
2.5 Gb/s GBIC Transceiver Modules:
Finisar’s new family of GBIC transceiver modules are stateof-the-art
components designed expressly for the building of high-speed bi-directional
communication links that require data rates of up to 2.5 Gb/s. These modules
will also interoperate with 2 Gb/s and 1 Gb/s data links.
The “smart” optical GBIC modules provide serial ID plus a special management
and diagnostics port. Using the standard 2-wire I C protocol, a host can
communicate with the GBIC transceivers to obtain status and operating
parameters. This built-in intelligence makes Finisar optical transceivers the
preferred choice for systems where high reliability and system-level diagnostics
are critical. Both short- and long-wavelength modules are available in versions
that can automatically configure themselves to interoperate with Fibre Channel
devices that do and do not run the OFC protocol.
The modules are available for 3.3 V and 5 V systems, and operate at special
extended voltage and temperature (-10 to 85 C) ranges. The optical GBIC
transceivers dissipate less than 0.9 watt—less than 50% of the maximum power
allowed by the GBIC specification. The modules’metal enclosure not only makes
them sturdier, but also improves the the transceiver’s FCC test margins. This
emissions and ESD control is particularly important in applications with
sensitive multiport hubs and switches.
With Finisar’s innovative latch-arm design, users can easily install and
remove GBIC modules with one hand, and with no tools. Finisar’s high-speed
transceiver modules are well known throughout the industry for their superior
quality, reliability, and affordability. An evaluation board is available for
test and demonstration purposes. All Finisar GBIC transceivers support hot
plug-and-play capability for Gigabit Ethernet and Fibre Channel applications.
FTR-8519-3-2.5 MM Module W/850
Product Features
- Up to 2.125 Gb/s bi-directional data links
- 850nm VCSEL Laser Transmitter
- “Smart “ Digital Diagnostics Functions
- Extended Operating Temperature Range (-10°C to +85°C)
- Extended Power Supply Voltage (Operate at 3.3V and 5V)
- Hot-Pluggable (complies with GBIC specification Rev. 5.4)
- Fully metallic enclosure for low EMI
- Low power dissipation
|
