Wavetek JDSU Acterna SDA-5000 & 3 CLI-1450 Meters
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
SDA-5000
Installed Options:- Reverse Sweep
The SDA-5000 is used for HFC network testing and deployment of digital video, data, and traditional analog services. It is part of a system sweep solution. The SDA-5000 is a small, lightweight hand-held field CATV Sweep Analyzer for diagnosing and eliminating problems quickly in CATV system equipment. Ideal for aligning amplifiers, testing performance of both forward and reverse path networks, finding and fixing sources of reverse path ingress, measuring signal quality, and fulfilling FCC and CENELEC proof-of-performance requirements.
Highlights:
- Qualifies the network for today's high-growth subscriber services.
- Reduces technician time for the most labor intensive maintenance and troubleshooting.
- Advanced QAM analysis for 64, 128, and 256 QAM (optional).
- Spectrum display from 5 to 1,000 MHz with cable modem analysis (Zero Span mode).
- Totally non-interfering sweep, specifically for 64, 128, and 256 QAM digital channels.
Applications:
- Non-interfering, continuously referenced sweep.
- Cable modem analysis using Zero Span mode.
- Full in-service, proof-of-performance analyzer.
- QAM View option provides complete analysis of digital TV and forward cable modem signals.
- Find ingress fast with Field View option. Cable technicians working in the field can see the reverse path at the headend.
- Forward and reverse sweep in one handheld instrument.
- QAM View includes BER, MER, and constellation.
- Equalizer stress and microreflections.
- QAM ingress (noise-under-carrier).
- New graphical test point compensation for easier setup.
CLI-1450
FEATURES
- Frequency agile leakage detection and measurement
- Headend video tagging option differentiates leaks in over-build situations
- Vehicle docking station option for quick vehicle antenna and powering connections
- Combination signal level and leakage meter, all in one box
- 95% of all forward and reverse ingress and interference is located in the distribution and home network Advanced ingress spectrum scan helps you locate the source fast and easy
- User-friendly iconbased user interface used throughout the entire WWG product line; multilanguage operator screens available
- Complete digital measurement solution for DTV and cable modem signals. digiCheck average power measurement including auto limit check
The CLI-1450 Leakage/Signal Level Meter is a high performance instrument designed for cable television technicians. The durable, water-resistant CLI-1450 makes innovative use of a graphics LCD to simplify operation. The LCD backlight makes measurements easier in crawl spaces and behind television sets. The display is also easy to see in bright sunlight.
The CLI-1450 is a highly sensitive, hand-held leakage meter that makes finding and measuring RF leakage easy. Because it can accurately detect and measure video signals, it is not necessary to inject an additional RF carrier for the purpose of monitoring leakage. Your CLI-1450 is frequency agile, you can configure it to monitor a carrier frequency between 115 to 140 MHz.
&
3 WAVETEK/Acterna CLI-1450 Combination Signal Level / Leakage Meter
SDA-5000 Installed Options:
Reverse Sweep
Acterna Wavetek CLI-1450 SDA-5000 CLI1450 SDA5000 CATV Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
- Wavetek JDSU Acterna SDA-5000 CATV Meter
- Option 1: Reverse Sweep
- SDA-5000 Battery Pack
- SDA-5000 AC Adapter/Charger
- SDA-5000 Power Cord
- SDA-5000 User Manual On CD-ROM
- Carrying Case For SDA-5000 w/ Strap
- (3) Wavetek/Acterna CLI-1450
- (3) CLI-1450 Battery Packs
- (3) CLI-1450 AC Adapter/Chargers
- CLI-1450 User Manual On CD-ROM