Agilent HP CALAN Star 2010 SLMS CATV Analyzer
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
Whether for routine maintenance or new interactive network installations, CaLan products offer a range of solutions. These products cover the entire 5 MHz to 1 GHz frequency range with exceptional speed ﾖ 60 channels of visual and aural carriers in less than 2 seconds.
2010 This SLM offers built-in comparison and analysis capability as well as the standard signal level measurements. It can also receive ingress data transmitted by the 3010H.
Cost-Effective Signal-Level Measurement The portable, rugged 2010 SLM Plus provides an affordable, entrylevel option for customers. Measurements include carrier amplitude, digital channel power, carrier-to-noise ratio, and hum. The fourchannel adjustment mode allows technicians to view four channels at a glance, for a quick, system-wide check of the lowest, highest and AGC pilot frequencies.
Digital Power Measurement Digital signals cannot be measured with conventional methods used for video carriers because their power is spread over a band unique to each form of digital signal. CaLan products incorporate a digital signal measurement capability ﾖ technicians need only enter the center frequency, span and format for each digital signals in the unitﾒs channel table. The family also provides accurate average power measurement for return path TDMA (bursted) carriers.
Digital signal power is the total average power over a channel bandwidth around its center frequency. The 2010 can adapt to the unique bandwidth power characteristics of digital signals to make measurements as simple as reading a number on the display.
Data Storage The 2010 can store up to 90 history files in any one of six formats: level measurements, normalized channel scan traces, sweep traces, spectrum scan traces, and ingress measurement results. Each file includes time and date stamps with a 40-character, user-defined label.
MEASUREMENT SPECIFICATIONS Digital Signal Power Levels Formats: QAM, QPR (DMX), QPSK, and VSB, bursted Amplitude Accuracy: ±1.5 dB (typical)
TDMA Measurement Range Burst width: >50 µ sec Burst repetition rate: <1.5 sec
Frequency Range: 5 MHz to 1 GHz Source Accuracy: ±25 kHz Resolution: 10 kHz Tuning Configuration: Standard, off the air, HRC, IRC, PAL, SECAM, user-defined IF bandwidth: 230 kHz Video bandwidth 300 kHz, automatic 10 Hz C/N
Amplitude Accuracy For Sweep and Carrier Measurements Range: +70 to -45 dBmV Typical Accuracy: ±1.0 dB Calibrator: ±0.25 dB at 113.36 MHz, ±0.2 MHz Frequency Flatness: ±0.5 dB Internal Preamp On: ±1.0 dB Attenuator: ±0.5 dB Log Linearity: ±0.5 dB Resolution: 0.1 dB Input Impedance: 75 ohm Input Match: 0 dB attenuation, >14 dB; all other settings, >20 dB
Ingress Measurements Burst Count Minimum Burst Width: <30 µSec Capture Ranges: < 100 µSec - < 1 Sec Sec in decades, < 3 Sec and > 3 Sec Average Noise Power Maximum TDMA Pulse Width Not Captured: >500 mSec
Hum Range: 0.5 to 5% Resolution: 0.1% Accuracy: ±0.2%, ±30% of reading
Carrier-to-Noise Ratio Range: 50 dB Accuracy: ±2 dB Repeatability: ±1 dB
For full Agilent CALAN 2010 product specifications, please click here: Agilent CALAN 2010
Agilent HP Sunrise CALAN Star 2010 SLMS CATV Analyzer
Time proven product for maintaining the networks of today and tomorrow.
Includes Carrying Case & Accessories As Listed
Agilent CALAN Star 2010 CATV Meter CALAN Star-2010 CATV Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 07028
- Agilent HP CALAN Star 2010 SLMS CATV Analyzer (BC# 07028 02643)
- Coax Cable
- 9 Pin Male To 25 Pin Male Converter
- RS232 PC Interface Cable
- AC Adapter/Charger
- User Manual On CD-ROM
- Carrying Case