|
Agilent E6000A Mini OTDR Mainframe
The Agilent Mini-OTDR is the best selling product in Agilent's portfolio of
Optical Network Test Solutions for the installation, maintenance and operation
of fiber networks.
The Mini-OTDR is designed to provide its users with the fastest tool
available for installing and commissioning multiple fiber links and locating
faults for fiber maintenance. This is accomplished through high measurement
performance and an award winning simple user interface.
Features
* High dynamic range: 40
dB
* Automatic fiber
characterization
* Built-in multi-fiber
test
* Fiber break locator mode
*
Full remote control
* Simple one-button
operation
* Context-sensitive on-line
help
* Automatic event adjustment
*
Front connector check
* Compliant to Bellcore GR-196-CORE
trace format
* Stabilized continuous wave (CW) light
source
* Minimum sampling resolution:
8cm
* 15 seconds power up cycle
*
Small and light
Characteristics
Horizontal Parameters
* Start-km:
* 0 km to 400 km Span: 0.1 km to 400 km
* Readout
resolution: 0.1 m
* Minimum sample spacing: 4
cm
* Refractive index: 1.00000 to
2.00000
* Length unit: km, ft, or
miles
* Measurement points: up to 64000
Vertical Parameters
* Vertical
scale:
* 0.1 to 10.0 dB/Div Read-out resolution: 0.001
dB
* Reflectance range: 14 dB to 60
dB
* Backscatter coefficient: 10 to 70 dB at 1 s
Storage
* 3.5 floppy disk drive:
* for high density 720/1440 kByte floppy disks. MS-DOS format compatible.
Reduced operating temperature of 5C to 45C, with 35% to 80% humidity at 40C.
Memory Card: PCMCIA Type II. 440 MB with up to 13000 traces (typical with 64000
data points).
* Internal memory: SRAM up to 2 MB. Up to
300 traces (typical) with 4000 data points
Interfaces
RS232C:
* Maximum transmission
rate:
* 115200 bps Transmission time at 115200 bps for
trace data: 4000 points at approx. 1 second; 64000 points at approx. 4
seconds.
* Centronics: Standard parallel port
(SPP).
* Keyboard: PS2 (Min-DIN). For English Standard,
PS2, or AT keyboard.
General
* Automatic setup
analysis
* Instrument settings: storage and recall of
user-selectable instrument settings.
* Laser safety class:
All OTDR laser sources specified by this data sheet are classified as Class 1M
according to IEC 60825-1 (2001).
Built-in Applications
* Automatic Multi Fiber
Test
* Pass/Fail Test
* Fiber Break
Locator
* Power Meter / Loss Test mode
1
* Visual Fault Finder mode 1
*
Optical Return Loss
* End to End
Loss
* Easy OTDR
* OTDR
Training
* OTDR Assistant
Environmental
* Operating
Temperature:
* 0 to 50 degees C Storage Temperature: 40 to
+60 degrees C
* Humidity: 95% R.H from 0 to 40 degrees
C
Power
* AC: 100 240 Vrms
* 10% 50
60 Hz DC: 16 24 V
* External Battery: NiMHtypically 8
hours continuous operation (minimum 4 hours) with Option #006. Charging time
< 3 hours, non-operating
* Low battery
indicator
* Battery charge status
| 
