|
Agilent E6000A Mini OTDR Mainframe
The Agilent Mini-OTDR is the best selling product in Agilent's portfolio of
Optical Network Test Solutions for the installation, maintenance and operation
of fiber networks.
The Mini-OTDR is designed to provide its users with the fastest tool
available for installing and commissioning multiple fiber links and locating
faults for fiber maintenance. This is accomplished through high measurement
performance and an award winning simple user interface.
Features
- High dynamic range: 40 dB
- Automatic fiber
characterization
- Built-in multi-fiber test
- Fiber break locator
mode
- Full remote control
- Simple one-button operation
-
Context-sensitive on-line help
- Automatic event adjustment
- Front
connector check
- Compliant to Bellcore GR-196-CORE trace format
-
Stabilized continuous wave (CW) light source
- Minimum sampling resolution:
8cm
- 15 seconds power up cycle
- Small and light
Characteristics
Horizontal Parameters
- Start-km:
- 0 km to 400 km
Span: 0.1 km to 400 km
- Readout resolution: 0.1 m
- Minimum sample
spacing: 4 cm
- Refractive index: 1.00000 to 2.00000
- Length unit: km,
ft, or miles
- Measurement points: up to 64000
Vertical Parameters
- Vertical scale:
- 0.1 to 10.0
dB/Div Read-out resolution: 0.001 dB
- Reflectance range: 14 dB to 60 dB
-
Backscatter coefficient: 10 to 70 dB at 1 s
Storage
- 3.5 floppy disk drive:
- for high density
720/1440 kByte floppy disks. MS-DOS format compatible. Reduced operating
temperature of 5C to 45C, with 35% to 80% humidity at 40C. Memory Card: PCMCIA
Type II. 440 MB with up to 13000 traces (typical with 64000 data points).
-
Internal memory: SRAM up to 2 MB. Up to 300 traces (typical) with 4000 data
points
Interfaces
RS232C:
- Maximum transmission rate:
- 115200 bps
Transmission time at 115200 bps for trace data: 4000 points at approx. 1 second;
64000 points at approx. 4 seconds.
- Centronics: Standard parallel port
(SPP).
- Keyboard: PS2 (Min-DIN). For English Standard, PS2, or AT
keyboard.
General
- Automatic setup analysis
- Instrument
settings: storage and recall of user-selectable instrument settings.
- Laser
safety class: All OTDR laser sources specified by this data sheet are classified
as Class 1M according to IEC 60825-1 (2001).
Built-in Applications
- Automatic Multi Fiber Test
-
Pass/Fail Test
- Fiber Break Locator
- Power Meter / Loss Test mode 1
-
Visual Fault Finder mode 1
- Optical Return Loss
- End to End Loss
-
Easy OTDR
- OTDR Training
- OTDR Assistant
Environmental
- Operating Temperature:
- 0 to 50
degees C Storage Temperature: 40 to +60 degrees C
- Humidity: 95% R.H from 0
to 40 degrees C
Power
- AC: 100 240 Vrms
- 10% 50 60 Hz DC: 16 24
V
- External Battery: NiMHtypically 8 hours continuous operation (minimum 4
hours) with Option #006. Charging time < 3 hours, non-operating
- Low
battery indicator
- Battery charge status
E6003A Specifications
| Central Wavelength |
1310 nm ± 25 nm/1550 nm ±
25 nm |
| Applicable Fiber |
single-mode |
| Pulsewidth |
10 ns |
100 ns |
1 μs |
10 μs |
20 μs |
| Dynamic Range[dB] |
21/20 |
27/25 |
33/32 |
40/39 |
43/41 |
| Event Deadzone |
1.5 m |
| Attenuation Deadzone |
8/10 m |
E6005A Specifications
| Central Wavelength |
850 nm ± 30 nm/1300 nm ±
30 nm |
| Applicable Fiber |
multimode 62.5 μm |
| Pulsewidth |
10 ns |
100 ns |
1 μs |
10 μs |
| Dynamic Range[dB] |
19/17 |
26/22 |
- /28 |
- /34 |
| Event Deadzone |
3 m |
| Attenuation Deadzone |
10 m |
E6006A Specifications
Uncertainty at reference
conditions: ± 3%
Power level: –20
dBm
Continuous Wave (CW)
Wavelength:
1300 nm ± 3 nm, 1310 nm ± 3 nm, 1550 nm ± 3 nm
Fiber
type: 50/125 μm graded index, Agilent/HMS-10
connector
Spectral bandwidth: up to 10 nm
Ambient
temperature: +18°C to + 28°C
Total uncertainty:
± 5% ± 0.5 nW (1310, 1550 nm)
Power level: +0 to –50
dBm
Continuous Wave (CW)
Wavelength: 850
nm ± 3 nm, 1300 nm ± 3 nm, 1310 nm ± 3 nm, 1550 nm ± 3 nm,
Fiber
type: SM to 50 μm graded index (add 2% to total uncertainty for fiber
62.5 μm).
Ambient temperature: +10°C to
+40°C
| 
