|
Fujikura FSM-11S
The SpliceMate (FSM-11) is the world’s smallest and most portable fusion
splicer, designed to meet the challenges posed by today’s fiber networks.
Fitting in the palm of your hand, the SpliceMate is smart and reliable enough to
be used with confidence by inexperienced operators.
SpliceMate’s advanced
intelligence features include dual-camera fiber inspection to insure the splice
is right, and auto arc calibration...an industry first. It’s easy to operate and
quickly makes low loss splices with all common types of optical fibers up to
4-fiber ribbons. The SpliceMate is available with a variety of powering options
including a battery pack and adapters to work with AC or DC power
sources.
A workstation, specifically designed for the SpliceMate, is
available for simplified splicing in the field. Whether splicing on a pole, in a
bucket, or in a neighborhood
SpliceMate is the splicer to have along on the job!
Features:
- Highly portable
- Dual camera inspection
- 3.5” dual direction monitor
- Single or 4-fiber versions available
- 40 second tube heater
- Auto arc calibration
- 30 mph wind protector
Specifications
| Parameter |
Value |
| Applicable Fibers |
SMF, MMF, NZ-DSF, DSF |
| Number of Fiber |
Single fiber (FSM-11S) |
| Cladding Diameter |
125µm |
| Coating Diameter |
250µm and 900µm |
| Typical Average Splice Loss |
SMF = 0.05dB / MMF = 0.02dB |
| Splicing Time |
FSM-11S (11 seconds) |
| Arc Calibration Method |
Automatic and manual methods |
| Splicing Modes (40) |
Auto SM / NZ / DS Auto MM SM, MM,
NZ-DSF, DSF |
| Splice Loss |
Estimate Based on dual camera inspection |
| Monitor |
3.5", adjustable monitor angle
(front or top selectable) |
| Tube Heating Time |
40 seconds |
| Number of Splice / Heat with
Battery |
30 |
| Power Supply |
AC, DC, Battery |
| Terminals |
USB |
| Wind Protection |
30 mph |
| Dimensions |
110W x 80D x 100H (mm) / 4.33W x
3.14D x 3.94H (inches) |
| Weight with Battery |
0.80kg / 1.76 lbs. |
Noyes M100
The Noyes M100 OTDR is the world'''s first handheld, singlemode and
multimode, four-wavelength Optical Time Domain Reflectometer with integrated VFL
(visual fault locator).
M100 is ideal for premises network Tier 2 fiber link certification and
fault-location measurements including: connection loss and reflectance, splice
loss, and fiber loss slope (attenuation rate).
The M100 is also suited for broadband service providers looking for a highly
portable OTDR to document and trouble-shoot fiber links in their access and FTTx
(fiber to the home/curb/office) networks.
Features:
- Hand-held size and < 2.7 lb (1.2 kg)
- 850/1300/1310/1550 nm
- Integrated Visual Fault Locator (650 nm)
- OTDR port adapters (ST/SC/FC)
- Bellcore (GR-196) file format
- Compact Flash memory card
- PC software for trace analysis and printing
- Active-matrix colour display
Applications:
- Premises network "Tier 2" certification
- Broadband/access network testing
- Baseline tracing
- Fault-location
- Connection loss and reflectance
- Splice verification CATV and DWDM networks
SINGLEMODE SPECIFICATIONS:
- Emitter type: Laser
- Safety class: Class I FDA 21 CFR 1040.10 & 1040.11
- Center wavelengths: 1310/1550 nm
- Wavelength tolerance: ± 30 / ± 30 nm
- Dynamic range: 26/ 26 dB @ 10 ?s, 3 min. test
- Event dead zone: 6 m
- Attenuation dead zone: 20 m
- Pulse width: 30 ns, 100 ns, 300 ns, 1, 3, 10
- Distance ranges: 300 m to 160 km
Miscelaneous:
- Group Index of Refraction adjustment range: 1.4000 to 1.6000
- Trace file format: Bellcore GR-196, Version 1.1
- Trace file storage medium: CompactFlash™ Type 1 memory card
- Trace file storage capacity: > 200 per 16 MB CF memory card
Visual Fault Locator:
- Emitter type: Laser
- Safety class: Class II FDA 21 CFR 1040.10 & 1040.11; IEC 825-1: 1993,
EN60825-1: 1994
- Wavelength: 650 nm
- Output power (nominal): 0.8 mW into 9/125 Single-mode or multimode optical
fiber
General:
- Size: (H x W x D): 190 x 100 x 70 mm (7.5 x 4 x 2.75 inches)
- Weight: 1.2 kg (2.7 lb)
- Operating temperature: 0 oC to + 40 oC
- Storage temperature: -10 oC to + 60 oC
- Relative humidity: 0 to 95% RH (non-condensing)
- Power: Rechargeable NiMH or 110/220 VAC adapter
- Battery life: > 2 hours
|
