Agilent N9923A kit with accessories

Agilent Keysight N9923A FieldFox RF Vector Network Analyzer w/ OPT: 106 6 GHz

Agilent N9912A FieldFox RF Combination Analyzer w/ OPT: 104 4Ghz

Agilent N9912A FieldFox RF Combination Analyzer w/ OPT: 104 4Ghz

Agilent N9912A FieldFox RF Combination Analyzer w/ OPT: 106 6Ghz

$9,779.00
Availability: Out of stock
SKU
1H226

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!

 Agilent Fieldfox N9912A RF Analyzer
FieldFox RF analyzers are designed to withstand your toughest working conditions. To accelerate your work, each operating mode has a task-driven user interface that saves time in the field. Step up to FieldFox ヨ and boost your readiness.

The N9912Aメs base function is a cable and antenna analyzer and it can be configured to include a spectrum and transmission/reflection 1-port vector, 2-port scalar network analyzer.

Cable and antenna analyzer
Fifty to sixty percent of cell site problems are caused by faulty cables, connectors, and antennas. Degraded feed lines cause poor coverage, unnecessary handovers, paging failures, and access failures on uplink. To avoid service quality problems, it is critical to keep cell sitesメ cable and antenna systems in good condition.

Use FieldFox to make return loss, VSWR, insertion loss/transmission, one-port cable loss, and distance-to-fault (DTF) measurements. You can test antennas, cables, ilters, and ampliiers with a single instrument.

Return loss and DTF measurements

FieldFox can make both return loss and distance-to-fault measurements at the same time. This helps you correlate overall system degradation with speciic faults in the cable and antenna system.

The built-in cable editor allows you to edit existing cable types on-site, and save them as new cable types with user deined names.

Measurements in the ?eld without the need to manually calibrate

Each instrument is CalReady at the RF Out port, immediately following power-on or preset. This means Qitメs already calibrated and ready to make measurements such as one port cable loss, VSWR, return loss, and DTF measurements at the test port.

Field strength measurements
Field strength characterization is a common test performed by operators in the field. To make accurate measurements, the gain and loss of the antenna and cables need to be accounted for. With FieldFox, antenna factors and cable loss data can be loaded using either the front panel or the Data Link software.

Limit lines simplify testing
Limit lines or masks can be used for quick pass/fail testing of devices or frequency spectrums. FieldFox allows you to deine fixed and relative limit lines, for both the RF spectrum traces and S-parameters. Additionally, with a single key press, you can build a limit line table from a current trace, and add offsets or margins to simplify your testing process.

Field-proof usability:
  • Trans?ective display and backlit keys
    • The display is designed for easy viewing in indoor and outdoor settings and in direct sunlight and darkness. Access different display modes via softkeys.
  • Task-driven key design  
    • Front-panel keys are grouped to easily and naturally perform standard field measurements
  • Speaker and headphone jack
    • Used for demodulated audio signal capability.
  • One-button measurement 
    • Provides task-driven user interface to simplify the measurements.
Rugged design:
  • Water-resistant chassis, keypad and case design
    • The case is made from polycarbonates that withstand wide temperature ranges and salty, humid environments.
  • RF connector protection 
    • A specially designed connector bay protects the RF connectors from damage during drops or other external impacts.
  • Dust-free design
    • With no vents or fans in the case, FieldFox resists dust for better equipment reliability
  • Meets tough environmental standard 
    • Meets MIL-PRF-28800F Class 2 specification
  • Gasketed doors
    • Protects instrument interface from moisture.
       
Modern connectivity:
  • USB 2.0 ports 
    • Two USB 2.0 ports; can be used for data transfer, GPS receiver and USB power sensor support
  • LAN port
    • Used for SCPI programming, Data Link connection, and remote control via iOS device.
  • SD flash card slot  
    • Use as a data storage device
  • FieldFox Data Link software
    • Transfer data remotely from the instrument to a PC for back office applications such as baseline analysis and report generation
  • Remote control capability
    • Remotely monitor and control FieldFox using an iOS device such as iPad or iPhone, via a LAN network connection
       

Specifications:
General
 Connector type
 
Type-N (female)
 
Input impedance 50 ohm
 
 External reference
Input type BNC female
Reference frequency 10 MHz
Required level -5 dBm to 10 dBm
Display 6.5ヤ translective, color VGA LED backlit 640 x 480 with anti-glare coating
Speaker Built-in speaker
Headphone jack Built-in headphone jack
Connectivity 2 x USB 2.0; 1 x mini USB; 1 x LAN
GPS Latitude, longitude, elevation and accurate time are provided. The GPS information can be displayed on the screen, and saved as
part of the image, data, or recording ile. The GPS capability is standard with all N9912A FieldFox RF analyzers. An external USB GPS
receiver is required. Agilent recommends the Microsoft Streets & Trips, or Microsoft AutoRoute with GPS locator.
Internal storage Minimum 16 MB, up to 1000 traces
External storage 1 x micro SD slot and 2 x USB 2.0
EMC Complies with European EMC Directive 2004/108/EC
  • IEC/EN 61326-2-1)
  • CISPR Pub 11 Group 1, Class A
  • AS/NZS CISPR 11
  • ICES/NMB-001
ESD IEC/EN 61000-4-2, functional up to 20 kV test
Safety Complies with European Low Voltage Directive 2006/95/EC
  • IEC/EN 61010-1 2nd Edition
  • Canada: CSA C22.2 No. 61010-1-04
  • USA: UL 61010-1 2nd Edition
Environmental Meets MIL-PRF-28800F Class 2 speciication
Humidity 95% at 40 °C
Temperature
Operating -10 ºC to +55 ºC
Non-operating -51 ºC to 71 ºC
Weight 6.2 lbs / 2.8 kg including battery
Dimensions (H x W x D) 11.5? x 7.4? x 2.8? (292 x 188 x 72 mm)
Power
 Power supply  External DC input: 15 to 19 VDC
External AC power adapter
Input 100 to 250 VAC, 50 to 60 Hz; 1.25 to 0.56 A
Output 15 VDC, 4 A
Power consumption 12 W
Battery 6 cell Lithium Ion, 10.8 V, 4.6 A-h
Battery operating time 4 hours
Languages English, Chinese, French, Spanish, Japanese, Russian, German, Italian, and Turkish




For full Agilent N9912A product specifications, please click here: Agilent N9912A

Agilent N9912A FieldFox RF Cable Antenna Combination Analyzer

Installed Options:
- Opt 111: QuickCal
- Opt 106: 6 GHz Cable And Antenna Analyzer

Includes Agilent 1250-6307 Open/Short/Load, Carrying Case & Accessories As Listed 

Agilent N9912A FieldFox N-9912A FieldFox Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

  • Agilent N9912A FieldFox RF Combination Analyzer w/ Options:
    • Opt 111: QuickCal
    • Opt 106: 6 GHz Cable And Antenna Analyzer
  • Armored Test Port Cable
  • BNC Cable
  • Ethernet Cable
  • Agilent 1250-6307 Open/Short/Load
  • AC Adapter/Charger
  • Power Cord
  • Strap For Unit
  • Carrying Case w/ Strap