Agilent Keysight N9923A FieldFox RF Vector Network Analyzer w/ OPT: 106 6 GHz

$7,949.00
Availability: In stock
SKU
1H196

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

 N9923A FieldFox

The first step in ensuring that wireless communication systems are running at their optimum level is to verify that RF components in the system, such as cables, antennas, and filters are properly tested and kept in good condition. The majority of these tests are conducted in the field or in a warehouse, where bench top instruments are not readily available, testing space is limited, or where a power source is simply not available. Agilentメs handheld FieldFox RF Vector Network Analyzer (VNA) is designed to make network analysis measurements in the field easier, convenient, and the most reliable.

Unmatched reliability for day-to-day tests
Whether you are testing a flight line for the air force, an RF system on a war ship, a wireless communication cable and antenna system, tuning RF components, or making other general purpose network analyzer measurements ラ the FieldFox RF VNA provides unmatched measurement reliability, stability, and efficiency for your every day test needs. The FieldFox RF VNA also builds on Agilentメs 40-year legacy of network analysis leadership in calibration, accuracy, and innovation.

Vector Network Analysis
The base FieldFox RF VNA provides transmission/reflection (T/R) measurements, or S11 and S21, with magnitude and phase. FieldFox VNA contains four independent, sensitive receivers. The receivers provide more than 100 dB of dynamic range for vector measurements of high rejection, narrowband devices such RF filters. The receivers also make possible full 2-port error correction with the Unknown Thru method, allowing you to measure non-insertable devices.

Return loss and DTF measurements
FieldFox can make return loss and distanceto-fault measurements at the same time. It helps you correlate overall system degradation with specific faults in the cable and antenna system. The built-in cable editor allows you to edit existing cable types on-site, and save them as new cable types with user defined names.

CalReady when the instrument is turned on
Save time and get right to work with FieldFoxメs CalReady feature, which makes the unit calibration ready at either test port immediately following power on or preset. FieldFox is already calibrated and ready to make measurements such as S11, S22, 1-port cable loss, VSWR, return loss, and DTF measurements at the test port without having to connect/disconnect additional cables or calibration devices.

Broadband calibration
FieldFox allows you to make broadband calibrations, which means the instrument is calibrated over the maximum frequency range. After a broadband calibration, you can change the frequency range or number of points without recalibrating the instrument. The calibration is interpolated, and accuracy is maintained.

User calibration kit support
FieldFox supports many Agilent standard calibration kits. In addition to CalReadyand QuickCal, FieldFox also provides a comprehensive calibration utility. To obtain the most accurate measurement, users need to use cal kits that match their device connector types. FieldFox allows users to define their own mechanical calibration kits.

Power meter
FieldFox can connect with the Agilent USB power sensors to make average power measurements up to 40 GHz. Using USB peak power sensors, users can measure both the average and the peak power of a modulated signal.

Electrical delay and port extension
For in-fixture measurements, use FieldFoxメs port extension or electrical delay capability to easily extend the reference plane to the device interface for accurate measurements. You can use the electrical delay capability to measure deviation from linear phase by removing the linear portion of the phase delay.

75 ohm device test
Most of the components used in cable TV systems are 75 ohm, like cables, filters, splitters and switches. You can use the FieldFox RF VNA to measure 75-ohm devices easily. QuickCal, combined with a 50/75 ohm adapter (eg. Agilent part: N9910X-846) at each port and a 75 ohm load, turns the instrument into a 75 ohm tester. Alternatively you can use any of Agilentメs 75 ohm calibration kits, along with a pair of 50/75 ohm adapters.

Specifications:

 
Network Analysis
MEASUREMENTS
S11, S21 Magnitude and phase
Display: Log, linear, phase, group delay, VSWR, Smith chart, polar chart, split screen to show different S-parameters and phases
System impedance selection: 50 ohm and 75 ohm (with 50/75 ohm adapter)
Frequency
Frequency range Option 106: 2 MHz to 6 GHz
FREQUENCY REFERENCE
Accuracy: ±2 ppm
Aging rate: ±1 ppm
Temperature stability: ±1 ppm over ヨ10 to 55 ºC
Frequency resolution 1 Hz
Sweep speed S21, S11 2 MHz to 6 GHz, 30 kHz IFBW, 1001 points 0.695 ms/point
Data points 101, 201, 401, 601, 801, 1001, 1601, 4001, 10,001 (custom number of points can be set using SCPI)
Directivity Corrected: 42 dB
System dynamic range (S21) 2 MHz to 6 GHz: 100 dB (typical)
IF bandwidth 300 Hz, 1 kHz, 3 kHz, 10 kHz, and 30 kHz
Output power range High power: +6 dBm (nominal)
Low power: ヨ40 dBm (nominal)
Trace noise (high output power, IF bandwidth = 300 Hz) Magnitude: < 0.01 dB rms
Immunity to interference +16 dBm (nominal)
Maximum input level port 1 or port 2 +23 dBm /±50 VDC
General Specifications
Connector type (port 1 and port 2) Type N Female
Test port impedance 50 ohm
EXTERNAL REFERENCE
Input type: BNC Female
Reference frequency: 10 MHz
Required level: ヨ5 dBm to 10 dBm
EXTERNAL TRIGGER INPUT
Impedance: 10 kO
Level range: Rise edge: 17V; falling edge: 1V
Display 6.5ヤ transflective, color VGA LED backlit 640 x 480 with anti-glare coating
Speaker Built-in speaker
Headphone jack Built-in headphone jack
Connectivity 2 x USB 2.0; 1 x micro USB; 1 x LAN
GPS Latitude, longitude, elevation, and accurate time are provided. The GPS information can be displayed on the screen and saved as part of the image or data  file. The GPS capability is standard with all N9912A FieldFox RF analyzers. An external USB GPS
receiver is required. Agilent recommends the Microsoft Streets & Trips, or Microsoft AutoRoute with GPS locator.
Internal storage Minimum 16 MB, up to 1000 traces
External storage 1 x micro SD slot and 2 x USB 2.0
EMC

Complies with European EMC Directive 2004/108/EC

  • IEC/EN 61326-1
  • CISPR Pub 11 Group 1, Class A
  • AS/NZS CISPR 11
  • ICES/NMB-001
 ESD  IEC/EN 61000-4-2, functional up to 20 kV test
Safety Complies with European Low Voltage Directive 2006/95/EC
 ユ IEC/EN 61010-1 2nd Edition
 ユ Canada: CSA C22.2 No. 61010-1-04
 ユ USA: UL 61010-1 2nd Edition
Environmental Compliant with MIL-PRE-28800F Class 2 general requirements - no exceptions
Temperature Operating: ヨ10 ºC to 55 ºC
Non operating: ヨ51 ºC to 71 ºC
Weight 6 lbs / 2.7 kg including battery
Dimensions (H x W x D) 292 x 188 x 72 mm (11.5" x 7.4" x 2.8")
POWER
Power supply External DC input: 15 to 19 VDC
External AC power adapter
Input: 100 to 250 VAC, 50 to 60 Hz; 1.25 to 0.56 A
Output: 15 VDC, 4 A
Power consumption: 14W (Typical)
Battery: 6 cell Lithium Ion, 10.8 V, 4.6 A-h
Battery operating time: 3.5 Hours



For full Agilent N9223A product specifications, please click here: Agilent N9923A
 

Agilent N9923A FieldFox RF Vector Network Analyzer w/ Option 106: 6 GHz Network Analyzer T/R

The receivers provide more than 100 dB of dynamic range for vector measurements of high rejection, narrowband devices such RF filters

Industry’s only handheld network analyzer with full MIL-PRF-28800F Class 2 compliance with no exceptions

Includes Carrying Case & Accessories As Listed

Agilent N9923A FieldFox N-9923A FieldFox Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

 

BC# 20026-L/T*

  • Agilent N9923A FieldFox RF Vector Network Analyzer w/ Option (BC# 20026-L/T*)
    • Opt 106: 6 GHz Network Analyzer (Transmission/Reflection)
  • (2) Armored Test Port Cables
  • RJ45 Network Cable
  • (2) BNC Cables
  • USB PC Interface Cable
  • 4GB Micro SD Card
  • AC Adapter/Charger
  • Power Cord
  • User Manual On CD-ROM
  • Strap For Unit
  • Carrying Case w/ Strap
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!