Agilent Wirescope PRO N2640A w SM/MM Fiber Set
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
WireScope Pro タモ An Expandable Platform WireScope Pro supports copper cable certification to TIA Categories 3 to 6A and ISO Classes C to E, Class EA and F limits. Sweeping a full 1 GHz in a few seconds, it boosts Cat 6A and Class F autotest measurement times to industry leading speed, and provides a future proof platform.
The new WireScope Pro extends the WireScope 350's capabilities to Category 6A and Classes EA and F cable certification. Cable and network installers gain maximum productivity through industry-leading measurement time, re-designed fiber probes and a new, simultaneous Alien Crosstalk test method.
The new WireScope Pro is optimized for testing efficiency: industry-leading measurement speed boosts the test throughput. New Fiber SmartProbes cut test times of optical links by eliminating the need to swap fibers for dual wavelength testing and calibration.
Agilentタルs newly developed Alien Crosstalk (AXT) test solution provides superior AXT measurement performance by employing a new, extremely fast and cost-efficient methodology. The new simultaneous measurement method shortens test times from hours to minutes.
FEATURES Cat 3 to 6A/ Class C to E, EA and F copper cable certification Test across AC coupled PoE midspan devices Multimode and single mode fiber certification for length and loss Future-proof through 1タ¦1000 MHz frequency range and software upgradeability Optional N2648A Alien Crosstalk Stimulator Kits certify copper links for 10GBASE-T in minutes Alien Crosstalk measurement to enable 10GBASE-T Real-time spectral analysis of External (Ambient) Noise to characterize cables in a live network User friendly with vendor managed cable database, pre-defined settings and a full workday of battery life Automatic detection of remote connection improves operator efficiency Supports Autotest and continuous measurement Talkset for easy communication between operators Export test reports into PDF and XML formats
LAN Cabling Certification
TIA Categories 3/5e/5/6/6A ISO/IEC Classes C, D, E, EA, F Alien Crosstalk measurement to certify copper lines for 10GBASE-T Available Option: Professional Network Test option for connectivity validation and service availability testing.
Industry Approvals
Complies with IEC/ISO Level IV and TIA/EIA Level IIIe accuracy specifications, certified by ETL Complies with IEC/ISO Level IV accuracy specifications, certified by ETL View the certificate for Cat 6A View the certificate for Class F
Multimode and Single Mode Fiber Certification
Loss and Length up to 8 km (Multimode)/ 50 km (Single Mode) Propagation Delay: 300 µs Range Optical Power: ±0.25 dB Accuracy New dual-wavelength Fiber SmartProbes eliminate fiber swapping for two-wavelength testing
Maximum Productivity
Rocket-fast Cat 6A and Class F Autotest measurement time of 9 seconds Future-proof 1タ¦1000 MHz range and software upgradeability Alien Crosstalk measurement to enable 10GBASE-T Easy to learn user interface consistent with previous generation
Unique Alien Crosstalk Testing Methodology In combination with Agilentタルs newly developed Alien Crosstalk Stimulators, WireScope Pro secures critical 10 Gigabit Ethernet installations and upgrades. The new SwiftAXT (Sweep Interleaved Frequency-domain Technique for Alien Crosstalk) technology offers a breakthrough in measurement time, cost of ownership, degree of automation and ease of use, making the method uniquely field suitable and convenient. Faster Measurement and Optimized Workflow Once connected, the DualRemote Pro unit operates entirely remote controlled. User interactions, including restarting running tests, happen on the near end only. The re-designed Fiber SmartProbes eliminate the need to swap fibers for dual-wavelength testing and calibration, optimizing the test throughput and accuracy.Agilent Wirescope PRO N2647MM Multimode 850 nm / 1300 nm Fiber SmartProbes Dual-wavelength Fiber SmartProbes allow the WireScopeト¢ Pro to measure length and propagation delay on optical fiber links. Also, they enable high-performance optical loss and power measurement.
Product Specifications:
Parameter Description
*Size: 79.5mm x 64mm x 44mm (3.1" x 2.5" x 1.7")
*Connectors: 2 x SC (Transmitter, Receiver)
*Operating Temperature: 0°C to +40°C
*Storage Temperature: -40°C to +55°C
Power Meter
* Detector Type: InGaAs
* Calibrated Wavelengths: 850 nm, 1300 nm
* Measurement Accuracy: +/- 0.25 dB at タモ20 dBm [1][2]
* Power Measurement Range: 0 to タモ42 dBm
Transmitter
* Source Type: LED
* Center Wavelength: 850 nm, 1300 nm (nominal)
* Output Power: > タモ20.5 dBm (into 50/125 ?m fiber)
* Laser Stability: > タモ19 dBm (typical, into 62.5/125 ?m fiber)
Fiber Network Specifications
* Cabling Standards ANSI/EIA/TIA 568A, 568.3, ISO/IEC 11801
* Ethernet 10GBASE-SR, -SW, -LX4
* Legacy Networks 1000BASE-SX, -LX, -LX10
* ATM/SONET 100BASE-FX
* FDDI/Fiber Channel 10BASE-FL, -FB, Token Ring
ATM-155 (UNI 3.1), ATM-155 SWL,
ATM-622, ATM/SONET OC-3, -OC-12
FDDI, Fiber Channel-SX, -LX
Propagation Delay
* Accuracy (whichever is greater): +/-2% or +/-3.6 ns
* Resolution: 4.2 ns
* Measurement Range: 0 to 300 ?s
Fiber Length
* Accuracy (whichever is greater): +/-2% or +/-0.72 m
* Resolution: 0.83 m at Refractive Index 1.4785
* Distance Range: 0 to 8 km for 1.50 dB/km at 1300 nm [3]B
[1] At room temperature, 23°C ± 3K
[2] With 50/125 ?m fiber
[3] Assumes double-ended configuration with 12 dB max link loss. Divide by 2 for single-ended configurations.
Agilent Wirescope PRO N2647SM Singlemode 1310 nm / 1550 nm Fiber SmartProbes
Part Numbers | Description |
Power Meter
|
InGaAs 1310 nm, 1550 nm ±0.25 dB at タモ20 dBm 0 to タモ50 dBm |
Transmitter
|
Fabry-Perot Laser 1310 nm ± 30 nm, 1550 nm ± 30 nm = タモ6 dBm (into 9/125 µm fiber) ±0.1 dB (1 hour, after 5 minutes warm-up) |
Fiber Network Specifications
|
ANSI/EIA/TIA 568A, 568.3, ISO/IEC 11801 10GBASE-LR, -LW, -ER, -EW, -LX4 1000BASE-LX, -LX10 100BASE-LX10 ATM-622, ATM/SONET OC-3, OC-12, OC-48 FDDI |
Propagation Delay
|
±2% or ±3.6 ns 4.2 ns 0 to 300 µs |
Fiber Length
|
±2% or ±0.72 m 0.83 m at Refractive Index 1.4785 0 to 50 km for 1.50 dB/km at 1310 nm |
For full Agilent Wirescope Pro SM MM product specifications, please click here: Agilent Wirescope Pro SM MM
Agilent WireScope PRO N2640A Cable Analyzer With N2647MM 850nm/1300nm Multimode & N2647SM 1310nm/1550nm Singlemode Fiber Modules.
Test & Certify Cat5, Cat5e, Cat6 & Cat6a Cabling Installations up to 1GHz and Multimode/Singlemode Fiber.
AutoTest Measurement Time Of 9 Seconds (1Mhz - 1Ghz)
Agilent Wirescope PRO Wirescope-PRO SM MM Fiber Cable Certifier Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
Includes N2647MM & N2647SM Fiber Modules, Carrying Case and Accessories As Listed!
- Agilent Wirescope PRO Main N2645A
- Agilent Wirescope DualRemote PRO N2645A
- (2) Agilent Cat6a Universal Link SmartProbe N2644A-101
- (2) Agilent Cat6a Universal Channel SmartProbe N2644A-100
- (2) Agilent 850/1300 MM Fiber SmartProbe N2647MM
- (2) Agilent 1310/1550 SM Fiber SmartProbe N2647SM
- Fiber Cables
- (2) MM SC-SC Duplex
- (2) SM SC-SC Duplex
- (2) Battery Packs
- (2) AC Power Adapters
- (2) Power Cords
- DC Car Charger
- (2) Talk Head Sets
- Stylus w/ Strap
- (2) Carrying Straps For Units
- Agilent Scope Data PRO II Software
- User Manual On CD-ROM
- Hard Copy User Manual
- Carrying Case w/ Strap