Berkeley Varitronics Systems The Fox Signal Strength Meter 2500-2700MHz

 Berkeley Valtronics The Fox
This compact 5 pound hand-held, battery-powered meter is packed with exceptional capabilities. The Fox is designed to measure RF propagation coverage and detect "RF Shadows". It is internally powered (or maybe externally) and logs text measurements, or displays graphically a wide assortment of built-in real-time macro measurements. These include "follow mode", C/I, RSSI, adjacent channel, "best server", peak hold, A-band or B-band scan and BER analysis.

POST-PROCESSING
Data from The Fox Meter measurements are saved to a 2 Mbyte PCMCIA flash card and to an RS-232 serial port for direct storage to a PC (up to 38K baud, selectable). Serial output may be binary (compressed) or in an ASCII comma delimited format.

Available Frequencies:

• PCS
• Cellular
• LMR 
• IVDS
• SMR
• AMPS
• ETACS
• PACS
• Paging

Features:

• High measurement rate, more than twice that of
• Dr. Lee's recommended 40 ?
• Internal eight channel differential Global Positioning
• System (GPS)
• Fast charge circuit (<2 hours)
• PCMCIA memory system for post processing data
• Capability to input X/Y coordinates from a floor plan
• Odometer input for correlation to distance during
• drive-around studies
• Weighs 5 pounds
• Optional dead reckoning available

Specifications:
 

DISPLAY	240 X 64 pixel Graphic Backlighted Electro-luminescence LCD (Super Twist)
TUNING RANGE	20-40 MHz tuning range of band
BANDS SUPPORTED
ISM:	2.400-2.485 GHz
	900-930 MHz
PCS:	Uplink (Blocks A through F) 1850-1910 MHz
	Downlink (Blocks A through F) 1930-1995 MHz
LMR:	805-825 MHz
IDEN/SMR:	850-870 MHZ
Cellular:	824-848 MHz
	868-896 MHz
ETACS:	872-905 MHz
	915-950 MHz
Paging:	145-165 MHz
	450-465 MHz
	928-941 MHz
IVDS:	218-219 MHz
WCS:	2.30-2.36 GHz
SENSITIVITY	-118 to -30 dB ± 1 dB (@ 10 kHz IF Bandwidth)
Adj. Chan. Rejection	> 50 dB @ 30 kHz
RSSI MEASUREMENTS	msec/chan                                  chan/sec
RSSI Measurement:	15                                              50
Fast Scan (Scan RX Band):	15                                              66
GENERAL SPECIFICATIONS
Dual Conversion:	83 MHz first IF, 455 kHz second IF
IF Bandwidth:	4 kHz, 10 kHz, 25 kHz or 30 kHz available (@ 5dB)
Stability:	± 2.5 PPM from freezing to 120¡F
Phase Noise:	> 80 DBC @ 1 kHz
Antenna:	TNC 50 ohms
Controls:	20 button keypad
Warm Up Time:	< 3 minutes
Power:	(1) Internal 12 Volt Ni-Cad batteries 1.8 A.H. Internal battery run time > 8 hours (2) External car cigarette lighter 12-16 VDC @ 200 mA (3) External DC transformer 16V @ 500 mA, 120 or 240 VAC auto switching
Serial Port:	RS232, 9600 baud, 8 bit. no parity, 1 stop bit
Weight:	5 lbs.
Dimensions:	3.5" H x 6" W x 7.75" L
Approvals:	UL, CSA

 

Berkeley Varitronics Systems The Fox Signal Strength Meter

The Fox is designed to measure RF propagation coverage and detect "RF Shadows"

Includes Accessories As Listed

Berkeley Varitronics The Fox The-Fox Signal Strength Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

 

BC# 13698

• Berkeley Varitronics Systems The Fox Signal Strength Meter (BC# 13698)
  • (2500-2700MHz Only)
• RJ11 Cable
• 32MB Flash Card
• AC Adapter/CHarger
• Power Cord
• Carrying Case (G)