Siecor FuseLite II Fiber Optic Termination System
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
The completely redesigned automatic FuseLite II Splicer complements the FuseLite® Termination System, which terminates optical fibers by fusion splicing to a prestubbed, factory-poished connector. This innovative combination of connector and fusion splicing technology provides a fast, user-friendly solution for high-performance optical fiber termination.
The FuseLite Connector is a モnear-zero-lengthヤ pigtail allowing field installation by fusion splicing to the field fiber within the physical boundaries of the connector. The stub fiber installed in the FuseLite Connector is polished in the factory, which eliminates the need for field polishing, increases the quality of the termination, and greatly reduces connector installation time. Single-mode connector options are FC, ST® Compatible, and SC, as well as angled FC and angled SC.
The new FuseLite II Splicer from Corning Cable Systems provides many enhancements which eliminate the variability in operatorsメ skill levels. While no longer offering fiber-to fiber splicing, the completely automatic splicer process provides consistent low loss results with the added benefit of splice evaluation.
Features:
- One-button automatic operation
- Automatic fiber positioning
- Splice loss evaluation
- Handler system simplifies fiber preparation
- Fiber end-face inspection
- Large 5 in LCD
- Factory performance in a field-installable connector
- No field polish required
- Fewer part numbers, tools and training for field installation
Specifications:
Mechanical Specifications | |
Connector | |
Insertion Loss | 0.35 dB typical |
Reflectance | Ultra PC: = -55 dB Angled PC: = -65 dB |
Durability | ? dB = 0.3 dB; 200 insertions |
Temperature Cycling | ? dB = 0.2 dB; -40º to +75°C |
Tensile Strength | 10 lb with 2.9 mm cable |
Splicer | |
Monitor | 100x magnification, 5 in LCD |
Fiber Alignment | Automatic fiber positioning and ferrule alignment |
Typical Splice Loss | < 0.15 dB mean (splice only) |
Splice Programs | (3 fixed, 10 user defined) |
Operating Temperature | -5º to +45°C |
Dimensions (H x W x D) | 216 mm x 185 mm x 140 mm (8.5 in x 7.3 in x 5.5 in) |
Weight (H x W x D) | Splicer with power supply and battery: 4.0 kg (8.9 lb) |
For full Corning FuseLite II product specifications, please click here: Corning FuseLite II
Siecor Corning FuseLite II Fiber Optic Termination System Kit
The FuseLite® Termination System, terminates optical fibers by fusion splicing to a prestubbed, factory-polished connector.
Includes 6 Month Fusion Splicer Care Kit (FS6MC)
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
Includes USFiberOptic USF-21C High Precision Fiber Cleaver, Hard Carrying Case & Accessories As Listed
Fuse-Lite
Corning Fuselite II Fuselite-II Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 04399
- Siecor FuseLite II Fiber Termination System (BC# 04399)
- USFiberOptic USF-21C High Precision Fiber Cleaver
- Clauss CFS-2 Fiber Optic Stripper
- 6 Month Fusion Splicer Care Kit FS6MC:
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
- 900/900 Fiber Holder
- 900/3000 Fiber Holder Set
- 900/250 Fiber Holder
- 523 Fiber Holder
- FC Connector Tool
- Corning Crimp Tool
- Corning Strip Length Gauge
- Battery Charger Cable
- Bench Clamp
- (8) Corning 95-200-45R Connector Kits
- Battery Pack
- Power Cord
- RS232 PC Interface Cable
- Hard Copy User Manual
- Hard Carrying Case