Crystal iS31 kit with accessories

Crystal IS31 30 Series 36 PSI Gauge Pressure Measurement Calibrator (IS31-36PSI)

Crystal Model iS31 Gauge Pressure Calibrator

$1,095.00
Availability: Out of stock
SKU
2C39

Condition: Refurbished / Calibrated

Warranty: 90 Day Exchange

Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!

 Crystal iS31 Pressure Calibrator
The 30 Series are compact and rugged pressure calibrators designed to bring laboratory accuracy to outdoor field conditions. Every 30 Series Calibrator is fully temperature compensated through extensive testing of all measured parameters while being exposed to environments of 0°C (32°F) to 50°C (122°F).

All 30 Series calibrators are intended for gauge pressure measurement. That is, they indicate the difference between applied pressure and ambient barometric pressure. The zero button also can be used as a tare function - extending the functionality of the calibrator for special applications.

They weigh less than a pound and advanced technology is employed throughout the product line. Sensors are constructed with stainless steel isolation diaphragms and permanent oil fill. This means 30 Series products can be used with gases and liquids.

Long battery life is achieved with a low power, RISC (reduced instruction set) type micro-controller for computation of complex algorithms. A 24 bit analog to digital converter provides internal resolution of 1 part in 16.7 million. Internal resolution always exceeds the displayed resolutions for all measurements. Full accuracy is maintained even while the low battery icon is flashing.

The 30 Series is specified in percent of reading - instead of percent of scale. Why? Because one 30 Series calibrator could replace several conventional calibrators by covering a wide range of pressure with high accuracy.

The Model 30 does not require any manual adjustments or trimming. All calibration is accomplished via an optically isolated communications port using a USB physical interface. The optical isolation protects the Model 30 from electrical transients that may appear on the USB connector or cabling to a PC.

Your 30 Series can be customized through the use of our free ConfigM30ル software. Your personal computer can disable, enable, or modify a variety of features of your 30 Series.

Features:
  • Add or create new pressure units and/or disable unused pressure units
  • Password protection to prevent unauthorized changes
  • Load and save custom configurations
  • View and print nan as received versus as left change report
  • Select your preferred H20 water density: 4°C, 60°F, or 68°F/20°C
  • Store a message or identification number

Specifications:
Pressure
0 to Full Scale ±(0.05% of Reading + Floor Term)
Vacuum
For 16 & 36 PSI: VFT = 0.004 PSI
For 300 PSI: VFT = 0.01 PSI
For 1 or 2 bar, & 100 or 200 kPa: VFT = 0.0003 bar or 0.03 kPa
For 20 bar or 2000 kPa: VFT = 0.001 bar or 0.1 kPa
Temperature
Operating 0° to 50°C (32° to 122°F)
Storage -20° to 70°C (-4° to 158°F)
Pressure Conversions
1 PSI = 27.6806 inches of water column (water at 4°C [39.2°F])
703.087 millimeters of water column (water at 4°C [39.2°F])
70.3087 centimeters of water column (water at 4°C [39.2°F])
2.03602 inches of mercury (mercury at 0°C [32°F])
51.7149 millimeters of mercury (mercury at 0°C [32°F])
6.8948 kilopascals
0.070307 kilograms per square centimeter
0.068948 bar
68.948 millibar
0.0068948 megapascals
Electrical
Range 0 to 55 mA
Resolution 0.001 mA
Accuracy ±(0.025% of reading + 0.001 mA)
Maximum Voltage 30 VDC
Maximum Current 100 mA
Power
Battery One Alkaline or Lithium 9V battery




For full Crystal iS31remote specifications, please click here: NCrtyslat IS31

Crystal Model iS31 300 PSI Pressure Calibrator

Intended for gauge pressure measurement to indicate the difference between applied pressure and ambient barometric pressure

is-31 iS31-300PSI iS31 300 PSI

Crystal iS31 iS 31 Pressure Calibrator Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 22566

  • Crystal iS31 Pressure Calibrator (BC# 22566)
  • User Manual On CD-ROM
  • Carrying Case (G)