|
Free Cable TV Installer Starter Toolkit Included!
- Coax
Cable Stripper (Brand New)
- Gilbert Termination Tool (Brand New)
- Coax
Security Shield Wrench (Brand New)
- Coax Pocket Toner w/ Battery (Brand
New)
The Acterna DSAM is a high-speed data installer meter that increases the
number of cable modem installs per day. Using exclusive digital signal
processing and integrated DOCSIS chipset technology, the meter communicates with
the network CMTS to verify suitable conditions for cable modem installation from
the subscriber's location. The DSAM is also equipped with signal level meter
capabilities, including spectrum scanning for ingress assessment and mini-scan
analysis of up to twelve analog and/or digital channels. The meter's AutoTest
capability makes installations easier and more reliabe than ever before.
Highlights
- All-in-one meter includes DOCSIS service testing and SLM features.
- Autotest capability with administration security.
- Environmental resilience and robustness.
- Extensive help system directly linked to meter capabilities.
Specifications
- Frequency
- Range: 4 to 1,000 MHz
- Accuracy: ±10 ppm at 77°F (25°C)
- Tuning Resolution:
- Analog: 10 KHz
- Digital: 50 KHz
- Channel Bandwidth: 6 MHz
- Analog Level Measurements
- Signal Types: CW, video and audio (NTSC, PAL, and SECAM)
- Range: -40 to +60 dBmV
- Resolution: 0.1 dB
- Resolution Bandwidth: 330 KHz
- Accuracy: ±1.5 dB typical @ 25°C
- Digital Level Measurements
- Modulation Types: QPR, QPSK, QAM (DVB/ACTS)
- Range: -40 to +60 dBmV
- Resolution: 0.1 dB
- Resolution Bandwidth: 330 kHz
- Accuracy: ±2.0 dB typical @ 25°C
- Upstream Spectrum
- Spans: 4 to 45 MHz
- Sweep Rate: 1.8 seconds or faster
- Display Scaling & Range: 5 and 10 dB/division; 6 vertical divisions
- Sensitivity: -35 to 60 dBmV
- DOCSIS compatibility: 5 to 42 MHz 42/88 MHz (min. downstream DOCSIS center
freq. 100 MHz)
|
