|
Fluke FTA-430 Fiber Modules
Fluke FTA-430 Fiber Modules, Fluke Networks keeps its eye on the future - so
you don't have to. Powerful, High Definition Diagnostics
Complete solution for testing and certifying high-speed Fiber
Networks
Fluke Networks offers the most complete line of Fiber Test Adapters
for testing and certifying Single mode, Gigabit and Single-Mode fiber optic
cabling systems. These Fiber Test Adapters are high-performance,
high-productivity fiber test options for the DSP-4000, DSP-4100 and DSP-4300
Digital Cable Analyzers.
Features:
- Test two fibers and two wavelengths simultaneously, automatically saving
the test results.
- Perform bi-directional testing on both fibers under test and save results
for both in one record.
- Utilize Fluke Networks' CableManager Software for comprehensive results
management and report generation.
- Automatically measure length and propagation delay along with loss.
- Verify optical connectivity and determine which fibers go to which
connectors at a patch panel.
- Communicate with a person on the other end of the fiber.
- Track the maximum and minimum power throughput of the test.
- Withstand drops and other mishaps that occur on the job.
|
DSP-FTA430 |
SingleMode Fiber Test Adapter
Uses LED light sources at 1310 nm and 1550 nm wavelenghts
|
Fluke FTA-420 Fiber Modules
Complete solution for testing and certifying high-speed Fiber Networks
Fluke Networks offers the most complete line of Fiber Test Adapters for
testing and certifying Single mode, Gigabit and Multimode fiber optic cabling
systems. These Fiber Test Adapters are high-performance, high-productivity
fiber test options for the DSP-4000, DSP-4100 and DSP-4300 Digital
CableAnalyzers.
Choose the world's first dual-fiber, dual-wavelength Multimode Fiber Test
Adapter to expand the capabilities of Fluke's Digital Cable Analyzers. It easily
attaches to the Fluke DSP-4300, DSP-4100 and DSP-4000 testers for
bi-directional testing of multimode links. Model DSP-FTA420S measures loss and
length on multimode fiber links easily and accurately. It uses LED light sources
at 850 and 1300 nm. Use this optional high-performance, high-productivity
multimode test adapter to document certified test results. In addition, the
timesaving FindFiber feature provided by the DSP-FTA420S enables users at both
ends to make a quick check for and locate a signal from the other end. Valuable
time spent searching for proper end-to-end connections is minimized.
Features:
- Test two fibers and two wavelengths simultaneously, automatically saving
the test results.
- Perform bi-directional testing on both fibers under test and save results
for both in one record.
- Utilize Fluke Networks' CableManager Software for comprehensive results
management and report generation.
- Automatically measure length and propagation delay along with loss.
- Verify optical connectivity and determine which fibers go to which
connectors at a patch panel.
- Communicate with a person on the other end of the fiber.
- Track the maximum and minimum power throughput of the test.
- Withstand drops and other mishaps that occur on the job.
|
DSP-FTA420S |
Multimode Fiber Test Adapter
Uses LED light sources at 850 nm and 1300 nm wavelenghts
|
DSP-FTA420/430 Specifications
General
Specifications
Power supply: ±6 V supplied by the DSP-4000 test
tool.
Temperature range: Operating: 0 ºC to +40 ºC; Storage: -10 ºC to +60
ºC
Warm-up time: 5 minutes
Humidity range: Operating: 0 % to 75 % RH,
non-condensing
Storage: 0 % to 95 % RH, non-condensing
Dimensions: 3.3” x
4.6” x 1.9” (8.3 cm x 11.6 cm x 4.7 cm)
Weight: 7.6 oz (215
g)
Optical Transmitter
Connector: SC,
multimode
Emitter type:
FTA420 - Multimode LED
FTA430 - Singlemode
laser
FTA440 - 850 nm Vertical Cavity Surface Emitting Laser (VCSEL);
1310
nm FP laser
Wavelengths:
FTA420 - 850 nm and 1300 nm
FTA430 - 1310 nm
and 1550 nm
FTA 440 - 850nm and 1310 nm
Power output:
FTA420 -20 dBm
(10 mW), typical (into 62.5/125 mm fiber)
FTA430 and FTA440 -10 dBm
Power
output stability (8 hours): ±0.25 dB at 23 °C
Optical
Receiver
Power measurement accuracy: ±0.25 dBm at 23 °C, 45 % RH to
75 % RH, -20
dBm for 850 nm and 1300 nm, -10 dBm for 1550 and 1625
nm
Connector: SC, multimode or singlemode
Detector type:
InGaAs
Calibrated wavelengths: 850 nm, 1300 nm, 1310 nm, 1550 and 1625
nm.
Power measurement range: +3 dBm to -50 dBm
Power measurement
linearity: ±0.25 dB at 23 °C
Length Measurement:
Measured in Loopback Mode
with included SC/ST patch cables and
one pair of ST/ST adapters.
FTA420 -
5000 meters of 62.5 um multimode cable
FTA430 - 10000 meters of singlemode
cable
FTA440 - 5000 meters of 50.0 um multimode cable
Length measurement
accuracy: ±1.5 m plus 2 % of length
|
