|
Fluke Networks' DTX-1200 Digital Cable Analyzer combines powerful speed and
unprecedented accuracy that no other certification tester can match. This
revolutionary platform gives you a complete solution that streamlines every
aspect of the certification job from setup to record-fast testing and
troubleshooting to reporting results to the customer. DTX can save you a
considerable amount of time up to four hours a day. It also significantly
reduces total certification costs by as much as 33% a year.
Model DTX-1200 Cable Analyzer provides revolutionized performance and value
for CAT 6/5e certification with test capabilities up to 350 MHz. It performs
industry-leading CAT 6 certification tests in just 12 seconds -- all in full
compliance with industry standards and superior Level IV accuracy. That's three
times faster than existing testers. This incredible speed means you can test up
to 170 more links in an eight-hour shift. And fiber testing is five times faster
with optional modules. Switch between copper and fiber with the push of a
button.
Troubleshooting faults is twice as fast. When a link fails, the DTX-1200
provides quick and easy-to-understand directions to identify the point of
failure (distance from the tester) and the possible reason(s) for the failure.
These directions not only tell you the problem but also identify corrective
actions test technicians can take to solve the problem quickly -- all without
having to consult the project manager. Instead of spending time executing trial
and error corrections -- and then re-testing to find out if the problem has been
resolved -- the technician knows exactly where to look and what to do to fix the
failing link. Even if only 2% of the cables certified in one shift fail the
Autotest, you will save as much as two hours of labor time per day
certifying.
This instrument isn't just a faster way to test. It's a faster way to do
everything -- even when you're not testing. It cuts setup and reporting times.
Its ease of use lowers training times. Extended 12-hour battery life means you
can do more on a single charge. The bright color display, ample memory and
built-in talk set all contribute to overall productivity while enhancing user
experience. This all adds up to save you time and money every day.
Specifications:
| Cat 6 Autotest time (seconds) |
9 |
| Maximum bandwidth (MHz) |
350 |
| Accuracy level |
IV |
| Color display |
• |
| Stores graphical results data |
• |
| Internal memory capacity (graphical Cat 6) |
250 |
| Removable memory card interface |
• |
| Cat 6 graphical results for each of 32 MB multiple |
600 |
| Lithium ion batteries – battery life |
12 hours |
| Advanced diagnostics |
• |
| AC Wire Map capability |
• |
| USB interface |
• |
| Serial interface |
• |
| Cat 6A permanent link adapter |
• |
| Cat 6 channel adapter |
• |
| Accepts resident fiber module |
• |
| Start autotest at smart remote |
• |
| Talk between main and smart remote |
• |
| DTX Compact OTDR Module |
option |
Fiber Loss/Length Test Module
(multimode, singlemode, or gigabit
multimode) |
option |
| Fiber Compact OTDR Module |
option |
| DTX 10 Gig Kit |
n/a |
| Network Service Module |
option |
| Patch Cord Test Adapters |
option |
| Class F Adapters |
n/a |
| Coax Cable Test Adapters |
option |
| Multimedia memory card |
option |
| USB cable |
• |
| Serial computer interface cable |
option |
| Talk headset |
• |
| Carrying case |
• |
• = Feature or accessory is available in the standard
product configuration
n/a = The feature is not available; the accessory
is not applicable
option = The accessory can be purchased as an
optional item. |
Fluke Networks DTX-MFM Multimode Fiber Module Set
Fluke Networks' DTX-MFM set of two Fiber Modules adds record-fast multimode
fiber certification and fault location to the DTX CableAnalyzer™ Series. Only
Fluke Networks' DTX platform offers optional on-board fiber modules so you'll
never lose time searching for your fiber adapter. Modules are easy to insert
into the back of any DTX Series CableAnalyzer. With a resident fiber module on
board, fiber certification is always ready when you are. Use the DTX-MFM Fiber
Modules for certification of 50/125 and 62.5/125 multimode fiber. No other
solution lets you switch between copper and fiber with a touch of a
button.
These modules deliver the greatest time and cost savings. They
accelerate testing through exclusive technology and an easy-to-use interface.
Press the Autotest button and you get standards-compliant certification
automatically. Test two fibers each at two wavelengths, measure length and
determine the pass or fail status -- all in about 12 seconds. That's five times
faster than other adapters. These fiber modules let you test more fibers in less
time, cutting testing costs and freeing you up for other tasks. They can easily
save more than 100 labor hours per year.
DTX-MFM fiber modules use LED
sources to ensure standards-compliant certification of multimode fiber. Speed
testing with TALK, FINDFIBER, MONITOR, bi-directional and single fiber test
features. Save, upload, manage and print comprehensive certification reports
using LinkWare PC software.
These comprehensive Tier 1 certification
solutions include loss, attenuation, length and polarity measurements. You can
validate fiber link performance and installation quality. Measure optical loss
at multiple wavelengths. And bi-directionally test fibers at two wavelengths
without swapping near- and far-end units. Deliver Tier 1 fiber certification
reports by uploading test results to LinkWare PC software.
An integrated
on-module visual fault locator (VFL) makes troubleshooting simple link problems
quick and incredibly easy. The bright laser-driven VFL helps you locate many
near-end fiber faults. Also use it to locate fibers as well as verify continuity
and polarity. Exclusive integrated design ensures the visual fault locator is
always on hand when you need it.
Both modules incorporate 850-nm and
1300-nm LED sources combined into a single output port, 850/1300/1310/1550-nm
power meter and integrated VFL.
Fluke Networks DTX-SFM
Fluke Networks DTX-SFM set of two DTX Fiber Modules adds record-fast
singlemode fiber certification and fault location to the DTX CableAnalyzer™
Series. Only Fluke Networks' DTX platform offers optional on-board fiber modules
so you'll never lose time searching for your fiber adapter. Modules are easy to
insert into the back of any DTX Series CableAnalyzer. With a resident fiber
module on board, fiber certification is always ready when you are. No other
solution lets you switch between copper and fiber with a touch of a
button.
These modules deliver the greatest time and cost savings. They accelerate
testing through exclusive technology and an easy-to-use interface. Press the
Autotest button and you get standards-compliant certification automatically.
Test two fibers each at two wavelengths, measure length and determine the pass
or fail status -- all in about 12 seconds. That's five times faster than other
adapters. These modules let you test more fibers in less time, cutting testing
costs and freeing you up for other tasks. They can easily save more than 100
labor hours per year.
DTX-SFM fiber modules use laser sources to ensure standards-compliant
certification of singlemode fiber. Speed testing with TALK, FINDFIBER, MONITOR,
bi-directional and single fiber test features. Save, upload, manage and print
comprehensive certification reports using LinkWare PC software.
These comprehensive Tier 1 certification solutions include loss, attenuation,
length and polarity measurements. You can validate fiber link performance and
installation quality. Measure optical loss at multiple wavelengths. And
bi-directionally test fibers at two wavelengths without swapping near- and
far-end units. Deliver Tier 1 fiber certification reports by uploading test
results to LinkWare PC software.
An integrated on-module visual fault locator (VFL) makes troubleshooting
simple link problems quick and incredibly easy. The bright laser-driven VFL
helps you locate many near-end fiber faults. Also use it to locate fibers as
well as verify continuity and polarity. Exclusive integrated design ensures the
visual fault locator is always on hand when you need it.
Both modules incorporate 1310-nm and 1550-nm laser sources combined into a
single output port, 850/1300/1310/1550-nm power meter and integrated VFL.
| 
