|
Add fiber optic test and network verification cabling to your DTX cable
analyzer. Certify cable and fiber loss, length and polarity, verify network
service availability and, link connectivity, and document in one LinkWare
report. Includes two modules one for Main and one for Smart Remote, 850nm and
1300nm LED sources combined into single output port, 850/1300/1310/1550 nm power
meter, and integrated VFL, 62.5/125 SC-SC test cables, and adapters.
Features:
- Fiber on-board when you need it
- Five times faster than existing testers with 12-second Autotest
- Delivers Tier 1 LinkWare fiber certification reports
- Locates fibers, verifies continuity and polarity, and finds breaks with
built-in VFL
- Speeds testing with TALK, FINDFIBER, MONITOR, bi-directional and single
fiber test features
- Functions as a Fluke Networks OptiFiber Certifying OTDR Smart Remote
DTX-MFM2 - Multimode Fiber Modules
- 850 nm and 1300 nm LED sources combined into a single output port
- 850/1300/1310/1550 nm power meter
- Integrated VFL
Fluke Networks' DTX-SFM2
DTX Singlemode Fiber Modules -
Includes two modules (one for Main and one for Smart Remote). each module
contains 1310 nm and 1550 nm laser light source combined into single output
port, 850-1550 nm power meter, integrated VFL, SC adapter for power meter and
Singlemode SC-SC Test Reference Cords.
Fluke Networks' DTX-SFM2 set of two DTX Fiber Modules adds record-fast
singlemode fiber certification and fault location to the DTX CableAnalyzer™
Series. Only Fluke Networks' DTX platform offers optional on-board fiber modules
so you'll never lose time searching for your fiber adapter. Modules are easy to
insert into the back of any DTX Series CableAnalyzer. With a resident fiber
module on board, fiber certification is always ready when you are. No other
solution lets you switch between copper and fiber with a touch of a button.
These modules deliver the greatest time and cost savings. They accelerate
testing through exclusive technology and an easy-to-use interface. Press the
Autotest button and you get standards-compliant certification automatically.
Test two fibers each at two wavelengths, measure length and determine the pass
or fail status -- all in about 12 seconds. That's five times faster than other
adapters. These modules let you test more fibers in less time, cutting testing
costs and freeing you up for other tasks. They can easily save more than 100
labor hours per year.
DTX-SFM fiber modules use laser sources to ensure standards-compliant
certification of singlemode fiber. Speed testing with TALK, FINDFIBER, MONITOR,
bi-directional and single fiber test features. Save, upload, manage and print
comprehensive certification reports using LinkWare PC software.
These comprehensive Tier 1 certification solutions include loss, attenuation,
length and polarity measurements. You can validate fiber link performance and
installation quality. Measure optical loss at multiple wavelengths. And
bi-directionally test fibers at two wavelengths without swapping near- and
far-end units. Deliver Tier 1 fiber certification reports by uploading test
results to LinkWare PC software.
An integrated on-module visual fault locator (VFL) makes troubleshooting
simple link problems quick and incredibly easy. The bright laser-driven VFL
helps you locate many near-end fiber faults. Also use it to locate fibers as
well as verify continuity and polarity. Exclusive integrated design ensures the
visual fault locator is always on hand when you need it.
| 
