4H42 - Fluke Networks DTX-MFM DTX-SFM DTX-GFM2 Fiber Kit

Fluke Networks DTX-MFM

Fluke Networks' DTX-MFM set of two Fiber Modules adds record-fast multimode fiber certification and fault location to the DTX CableAnalyzer™ Series. Only Fluke Networks' DTX platform offers optional on-board fiber modules so you'll never lose time searching for your fiber adapter. Modules are easy to insert into the back of any DTX Series CableAnalyzer. With a resident fiber module on board, fiber certification is always ready when you are. Use the DTX-MFM Fiber Modules for certification of 50/125 and 62.5/125 multimode fiber. No other solution lets you switch between copper and fiber with a touch of a button.

These modules deliver the greatest time and cost savings. They accelerate testing through exclusive technology and an easy-to-use interface. Press the Autotest button and you get standards-compliant certification automatically. Test two fibers each at two wavelengths, measure length and determine the pass or fail status -- all in about 12 seconds. That's five times faster than other adapters. These fiber modules let you test more fibers in less time, cutting testing costs and freeing you up for other tasks. They can easily save more than 100 labor hours per year.

DTX-MFM fiber modules use LED sources to ensure standards-compliant certification of multimode fiber. Speed testing with TALK, FINDFIBER, MONITOR, bi-directional and single fiber test features. Save, upload, manage and print comprehensive certification reports using LinkWare PC software.

These comprehensive Tier 1 certification solutions include loss, attenuation, length and polarity measurements. You can validate fiber link performance and installation quality. Measure optical loss at multiple wavelengths. And bi-directionally test fibers at two wavelengths without swapping near- and far-end units. Deliver Tier 1 fiber certification reports by uploading test results to LinkWare PC software.

An integrated on-module visual fault locator (VFL) makes troubleshooting simple link problems quick and incredibly easy. The bright laser-driven VFL helps you locate many near-end fiber faults. Also use it to locate fibers as well as verify continuity and polarity. Exclusive integrated design ensures the visual fault locator is always on hand when you need it.

Both modules incorporate 850-nm and 1300-nm LED sources combined into a single output port, 850/1300/1310/1550-nm power meter and integrated VFL.

Fluke Networks DTX-SFM

Fluke Networks DTX-SFM set of two DTX Fiber Modules adds record-fast singlemode fiber certification and fault location to the DTX CableAnalyzer™ Series. Only Fluke Networks' DTX platform offers optional on-board fiber modules so you'll never lose time searching for your fiber adapter. Modules are easy to insert into the back of any DTX Series CableAnalyzer. With a resident fiber module on board, fiber certification is always ready when you are. No other solution lets you switch between copper and fiber with a touch of a button.

These modules deliver the greatest time and cost savings. They accelerate testing through exclusive technology and an easy-to-use interface. Press the Autotest button and you get standards-compliant certification automatically. Test two fibers each at two wavelengths, measure length and determine the pass or fail status -- all in about 12 seconds. That's five times faster than other adapters. These modules let you test more fibers in less time, cutting testing costs and freeing you up for other tasks. They can easily save more than 100 labor hours per year.

DTX-SFM fiber modules use laser sources to ensure standards-compliant certification of singlemode fiber. Speed testing with TALK, FINDFIBER, MONITOR, bi-directional and single fiber test features. Save, upload, manage and print comprehensive certification reports using LinkWare PC software.

These comprehensive Tier 1 certification solutions include loss, attenuation, length and polarity measurements. You can validate fiber link performance and installation quality. Measure optical loss at multiple wavelengths. And bi-directionally test fibers at two wavelengths without swapping near- and far-end units. Deliver Tier 1 fiber certification reports by uploading test results to LinkWare PC software.

An integrated on-module visual fault locator (VFL) makes troubleshooting simple link problems quick and incredibly easy. The bright laser-driven VFL helps you locate many near-end fiber faults. Also use it to locate fibers as well as verify continuity and polarity. Exclusive integrated design ensures the visual fault locator is always on hand when you need it.

Both modules incorporate 1310-nm and 1550-nm laser sources combined into a single output port, 850/1300/1310/1550-nm power meter and integrated VFL.

Fluke Networks DTX-GFM2

DTX Gigabit Multimode Fiber Modules - Includes one module incorporating: 850nm VSECL source and 1310nm laser source combined into a single output port, 850-1550nm power meter, Integrated VFL, and an SC adapter for power meter.

The DTX fiber advantage:

• Fiber on-board when you need it
• Five times faster than existing testers with 12-second Autotest
• Delivers Tier 1 LinkWare fiber certification reports
• Optimized for applications ranging from 10 Mb/s to 10 Gb/s
• Locates fibers, verifies continuity and polarity, and finds breaks with built-in VFL
• Speeds testing with TALK, FINDFIBER, MONITOR, bi-directional and single fiber test features
• Supports multiple SFF (small form factor) fiber connectors

Record-fast fiber certification
We engineered the DTX Fiber Modules to accelerate testing through exclusive technology and an easy-to-use interface. Press the Autotest button and automatically test two fibers, each at two wavelengths, measure length, and determine pass or fail status – all in about 12 seconds. Our fiber modules let you test more fibers in less time, minimizing testing costs and freeing you up for other tasks. Over time, the savings are substantial – easily more than 100 hours per year.

Test copper and fiber with a touch of a button
Only the DTX platform offers optional on-board fiber modules. Never lose time searching for your fiber adapter. Fiber certification is always resident and ready when you are.

Deliver complete Tier 1 certification
DTX fiber modules provide a complete Tier 1 certification solution – loss, length and polarity. Validate fiber link performance and installation quality. Measure optical loss at multiple wavelengths, measure fiber length and verify polarity. You can bi-directionally test two fibers at two wavelengths with incredible speed without swapping main and remote units, a capability only available from Fluke Networks.

Certify multimode fiber
Your network may contain both multimode or singlemode fiber types. Our VCSEL/LD module qualifies the link for 1 or 10 Gigabit Ethernet use. Save, upload, manage and print comprehensive certification reports using Fluke Networks LinkWare™ PC software.

Find faults faster
Use the integrated on-module visual fault locator (VFL) to troubleshoot simple link problems. The bright laser-driven VFL helps you visually locate many near-end fiber faults, and is useful for continuity and polarity verification. Our exclusive integrated design ensures that the VFL is always on-hand when you need it.

Fluke Networks delivers Network SuperVision
Fluke Networks is committed to providing innovative Network SuperVision Solutions™ for testing and certifying copper and fiber cabling systems. Simply add these powerful modules to your DTX CableAnalyzer to certify, troubleshoot and document your fiber installations – today and tomorrow – with one compact field tester.

Optical Specifications (23oC)
Input (Meter) connectors	Removeable adapter on fiber optic power meter (input
	port). Removable SC adapter standard with product.
	Optional removable adapters: LC, ST and FC
Output (Source) connectors	Fixed SC adapter
Source type and nominal wavelength	DTX-GFM2: 850 nm VCSEL and 1310 nm FP laser
Length measurement	DTX-GFM2: 2 5,000 m of 62.5 or 50 µm fiber
Power meter type	InGaAs detector
VFL Specifications (23oC)
Laser type and nominal wavelength	Class II CDRH, 650 nm
Output modes	Continuous wave and flashing mode
Connector adapter	2.5 mm universal
Environmental Specifications
Operating temperature	0oC to 40oC
Storage temperature	-20oC to 60oC
Safety	CE, CSA, EN 61010-1
General Specifications
Dimensions (L x W x D), nominal	4.2" x 3.0" x 1.1" (106 mm x 76 mm x 28 mm)
Weight, nominal	0.31 lb (0.14 kg)