|
FiberMeter is the most complete system for field testing of
premise-wiring multimode and singlemode fiber. For testing multimode fiber,
FiberMeter is the first portable test system to provide automated measurement of
optical loss and cable length, Pass/Fail certification against industry
standards, detailed certification reports, and the convenience of a built-in
talk set. FiberMeter will even test singlemode fiber, providing two separate
precision power meters for measuring singlemode optical power and loss.
Multimode Fiber Test Features:
* Tests two multimode
fibers with one setup.
* Automatic bi-directional loss
measurements at 850 and 1300 nm
* Automated loss budget
calculation
* Loss margin analysis
*
Cable length
* Propagation delay
*
Pass/fail certification against cabling standards and network
requirements.
* Stores up to 2000 link
reports.
* Uploads test reports to PC for archiving and
printing.
* Built-in talk set.
Time Savings
FiberMeter will significantly reduce the time you spend
setting up and performing tests and quickly pays for itself with productivity
improvements. With FiberMeter, pairs of multimode fiber cable are simultaneously
measured for bi-directional loss at both 850 and 1300 nm wavelengths with one
test setup. Use of FiberMeter for multimode fiber certification can cut testing
time up to 80 percent or more compared to manual loss measuring methods. For
solo-operator testing, FiberMeter saves additional time spent in
test setup,
for tests can be initiated from either end of the fiber link using either
FiberMeter handset.
Fiber Certification Based On Industry Standards
With FiberMeter,
certification of multimode fiberoptic links is easier
than ever and
eliminates the need for interpretation of raw test results. Simply choose from a
library of fiber cabling standards, such as TIA 568A or ISO 11801, or
network
standards such as 10BASE-FL or Gigabit Ethernet 1000BASE-SX. FiberMeter
calculates an optical loss budget (loss Pass/Fail limits) based upon
the
specified number of connections and splices in the optical link, plus the
measured length.
Autotests on a pair of multimode fibers can be completed in
less than 6 seconds. Test results include: Pass/Fail indication, loss
measurements at 850 nm and
1300 nm, margin between the measured loss and the
established loss budget, cable length, and propagation delay. Up to 1000
Autotest reports may be stored in
each handset (2000 total) along with the
test date, selectable company/customer name, and link identification number.
Special auto-incrementing Link ID naming
mode facilitates the naming of
sequential tests.
Certification Reports
Stored Autotest certification reports can be output
to a serial printer or uploaded to a PC using the included Report Manager
Software (RMS). RMS, a Windows 95/NT 4.0 based utility program provides a
simple, intuitive interface for summarizing, sorting and printing test
reports.
Test and Talk With One Instrument
LinkTalkTM provides voice communications
over the multimode fiber under test. The
integrated talk set keeps you
talking even in buildings that prevent use of 2-way radios.
LinkTalk includes
built-in microphones, individual earphones, volume controls, and a Call Alert
signal. Standard miniature audio jacks on the FiberMeter handsets accept
any
conventional headset.
Tests Singlemode Fiber (Available December 1999)
Each FiberMeter handset
can be used as a precision optical power meter for measuring loss on singlemode
fiber at both 1310 nm and 1550 nm wavelengths using a separate laser source
(available seperately). Reference levels at both wavelengths may be saved with a
push of a button. Test results may be saved for later printing or uploading to a
PC using Report Manager Software.
Product Updates and Upgrades
Flash ROM keeps FiberMeter current by
allowing updates for new test standards and requirements. Product firmware
updates are made available periodically on the Datacom Textron Web site, and are
easily downloaded to the FiberMeter handsets from a PC using the supplied RMS
software.
Ra Series of Fiberoptic Testers
FiberMeter is part of the Ra Series of
fiberoptic testers, a complete range of innovative products for testing,
certifying and maintaining fiberoptic cabling. For more information on other Ra
Series fiber optic testers, contact Datacom Textron or visit the Datacom Web
site.
Supported Cabling and Network Standards
TIA 568A Backbone
TIA 568A
Horizontal
ISO 11801/EN50173 Backbone
ISO 11801/EN50173
Horizontal
1000BASE-SX (Gigabit Ethernet)
1000BASE-LX (Gigabit
Ethernet)
Wavelengths
850 nm, 1300 nm
Multimode Fiber Length
Range: 1-6600 ft (1-2000 m)
Resolution: 1 ft (1
m)
Accuracy: 0-1000 ft (0-305 m): +/- 2 ft (0.6 m) +/- 2% +/- IOR
Uncertainty
1001 - 6600 ft (305 m - 2000 m): +/- 2 ft (0.6 m) +/- 3% +/- IOR Uncertainty
Multimode Fiber Propagation Delay
Range: 10-10,000 ns
Resolution:
1ns
Multimode/Singlemode Loss
Dynamic Range: +3 dBm to -50 dBm
Resolution:
0.01 dB/dBm
Accuracy: +/- 0.3 dB @ -20 dBm
Photodiode Detector
Indium Gallium Arsenide (InGaAs)
Source
LED
Connectors (each handset)
ST Connectors (2)
Physical Characteristics (each handset)
Dimensions: 31 x 9.9 x 6.3 cm
(12.0 x 3.9 x 2.5 in)
Weight: 1.08 kg (2 lb. 6 oz.)
Power (each handset)
Batteries: 8 AA alkaline batteries
AC/Battery
eliminator
Nickel Metal Hydride (NiMH) rechargeable battery pack
(optional)
Adjustable power-saving Òpower-downÓ time
Low battery
indicator
Display (each handset)
Backlighted, graphical LCD
Environmental
Operating Humidity (non-condensing): 10% to 90%
Operating
Temperature Range: 0 to 50¡ C (32 to 122¡F)
Storage Temperature Range: -20 to
60¡ C (4 to 140¡F)
Includes:
* (2) FiberMeter
Handsets
* (2) MM FiberCat Adapters
* (2) Handset Impact Cases with Straps
* (2) LinkTalk
Headsets
* (2) MM ST-to-ST Fiber Patch
Cables
* (2) AC Adapters
* Report
Manager Software
* PC Interface
Cable
* Hard Carrying Case
* Hard
Carrying Case Keys
* User manual
| 
