Fujikura FSM-30R12 kits with accessories

2 Fujikura FSM-30R12 Fiber Fusion Splicers

Noyes OPM 4-4D kit with accessories

AFL Noyes OPM 4-4D & OFS 300 Fiber Inspection Kit

EXFO 1500 Meter SM Fiber Launch Cable FC SC

$0.00
Availability: Out of stock
SKU
4F72

Condition: Refurbished

Warranty: 90 Day Exchange

Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!

EXFO 1500 Meter SM Fiber Launch Cable

PSB-B-1500 = Stand-alone Fiber Launch Cables, singlemode fiber 9/125, 1500 m
89 = FC/UPC
91 = SC/UPC

 

  • Installation/troubleshooting/OTDR testing essential: covers the OTDRメs dead zone, enabling loss measurement on the fi rst and last connections of a fi ber under test
  • Increase the life of the OTDR connector by reducing the number of matings on the OTDR connector
  • Wide selection of connectors for quick connection to most OTDR and patch panel ports
Typically, the length of an OTDRメs dead zone is equivalent to that of the optical pulse plus a few meters. The chosen launch test cable
should therefore be longer than the pulse dead zone used for the tests. For instance, a 1 µs pulse is approximately 100 m long; selecting
a 150 m SPSB or a 300 m LTC/PSB would therefore be appropriate.

How It Works
Link characterization is often performed using an OTDR. But even though an OTDR has the shortest dead zones, because of the way
loss is measured in a link, it does not allow the characterization of the first and last connectors without using a launch test cable,
also called a pulse suppressor box. Hereメs why.

The loss value associated with an event is the difference between the backscattering levels measured before and after the event.
To account for the OTDRメs dead zone, obtaining a backscattering level before the first connector requires inserting a certain length
of fiber between the OTDR port and the first connector of the fiber under test. At the other end of the link, the same length of fiber is
added after the last connector of the モreceiveヤ cable.

In order to obtain an accurate, complete picture of the systemメs lossラwhich is a critical aspect of fiber commissioningラa launch test
cable should always be used at both ends of the fiber link.

EXFO 1500 Meter SM Fiber Launch Cable PSB-B1500-89-91

PSB-B-1500 = Stand-alone Fiber Launch Cables, singlemode fiber 9/125, 1500 m
89 = FC/UPC
91 = SC/UPC

EXFO FC-SC 1500 Meter FC SC 1500 Meter SM Fiber Launch Cable Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

  • EXFO PSB-B1500-89-91 1500 Meter Fiber Launch Cable
  • Integrated Hard Case