EXFO FOT 20A Meter FLS 130A Source SM Fiber Test
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
FOT-20A Power Meter
The FOT-20A Power Meter is compact, accurate, rugged and easy-to-use instruments for both power and loss testing. Like all of EXFO's handheld power meters, the FOT-20A can be calibrated to a custom wavelength.
Features:
- Direct loss measurement in dB
- Five electronically calibrated wavelengths
- Shockproof holster also acts as storage compartment for fiberoptic adapters and replacement battery
- Auto-off function
- Power measurements in dB, dBm and W
Performance
The FOT-20A incorporates EXFO's linear amplification technology and are traceable to NIST. It offers five calibrated wavelengths, and perform 2 kHz signal detection for fiber identification. Unit configurations are available with germanium or high-power germanium detectors. An electrical offset nulling feature makes the FOT-20A ideal for operation in extreme temperature conditions.
Ruggedness
The FOT-20A Power Meter meets Telcordia's strict drop-test requirements. A complete range of EXFO fiber-optic adapters is available for connector interface. A single 9 V battery powers these units for over 14 hours.
Applications
- Transmitter power measurements (dBm and W)
- Fiber-link loss testing (dB)
- Component insertion-loss testing (dB)
- Fiber identification with 2 kHz signals
- LAN installation and maintenance applications
Models | FOT-22A |
Detector type | Ge (2 mm) |
Standard calibrated wavelengths (nm) | 780, 850, 1300, 1310, 1550 |
Measurement range (dBm) | 6 to -60 |
Resolution (dB) | 0.05 |
Uncertainty (%) | ±5 |
EXFO FLS-130A
Features
- Single- or dual-wavelength configuration
- 2-kHz signal generation for fiber identification
- Dual powering: 9 V battery and AC adapter/charger
- Auto-off function
- Rigid carrying case and shockproof holster with strap
- Equipped with EXFOメs Universal Interface, except for certain FOS-120A models
Versatility
The FOS-120A Light Source and FLS-130A Laser Source feature single- and dual-wavelength sources from single or double ports. The units deliver continuous wave (CW) signals for power/loss measurements and 2-kHz signal generation for fiber identification. Certain FOS-120A models and all FLS-130A models are equipped with EXFO's Universal Interface.
Unit Powering
Powering options include a 9 V battery and a standard AC adapter. The battery life offers a minimum of seven hours of continuous operation. An auto-off function with a 10-minute timer is included to preserve battery life.
Specifications
- Wavelength (nm): 1310 ± 20; 1550 ± 20
- Spectral width (nm): less than or equal to 5/5
- Launch power (dBm): 9/125 µm: -7/-7; 50/125 µm: -7/-7; 62.5/125 µm: -7/-7
- Power stability (dB): 1 h: ± 0.06/± 0.08; 8 h: ± 0.10/± 0.12
- Output ports: 2
- Size (H x W x D): 22.2 cm x 10.3 cm x 5.9 cm (8 3/4 in x 4 1/16 in x 2 1/4 in)
- Weight: 0.6 kg (1.4 lb)
- Operating Temperature: -10 °C to 50 °C (14 °F to 122 °)
For full EXFO FOT-20A product specifications, please click here: EXFO FOT-20A
EXFO FOT-22A-SPC Fiber Optic Power Meter & EXFO FLS-135A-EI Laser Source
Power Meter
850nm
1300nm
1310nm
1550nm
1625nm
Light Source
1310nm
1550nm
Includes Noyes OFS 300-200C Optical Fiber Scope
EXFO FOT-20A FLS-130A FOT20A FLS130A SM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
- EXFO FOT-22A-SPC Fiber Optic Power Meter
- 850nm
- 1300nm
- 1310nm
- 1550nm
- 1625nm
- EXFO FLS-135A-EI Laser Source
- 1310nm
- 1550nm
- Noyes OFS 300-200C Optical Fiber Scope w/ Case
- NTT-ME Cletop Reel Type A Fiber Connector Cleaner
- Interchangeable SC Connector For Power Meter
- Interchangeable Universal Connector For OFS 300-200C
- (2) Interchangeable SC Connectors For Source
- (2) SM SC-SC Fiber Cabled
- (2) SC-SC Fiber Connectors
- (2) AC Adapters/Chargers
- Mandral
- (2) Straps For Unit
- Hard Copy User Manual
- Hard Carrying Case