EXFO FTB-8130 NGE Transport Blazer 2.5 & 10 Gig SDH Module
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
FTB-8130NGE Power Blazer module
SMARTMODE = Real-time signal discovery and alarm/error monitoring per channel
The FTB-8130NGE Power Blazer module offer a wide range of SDH test functions ranging from simple bit error rate (BER) testing to advanced characterization and troubleshooting procedures. These functions include:
- ﾛ Mixed and bulk payload generation and analysis from 64 kbit/s to 10 Gbit/s
- ﾛ High-order mappings: STS-1
- ﾛ Low-order mappings: VT1.5/2/6, TU-11/12/2/3
- ﾛ Unframed optical signal testing at 10 Gbit/s rate
- ﾛ Section/RS, Line/MS, high-order (HO) and low-order (LO) path overhead manipulation and monitoring
- ﾛ Section/RS, Line/MS, high-order and low-order path alarm/error generation and monitoring
- ﾛ High-order and low-order pointer generation and monitoring
- ﾛ K1/K2 OH byte capture
- ﾛ Tandem connection monitoring
- ﾛ Performance monitoring: G.821, G.826, G.828, G.829, M.2100, M.2101
- ﾛ Frequency analysis and power measurement
- ﾛ Payload block and replace
- ﾛ Frequency offset generation
- ﾛ DS1 loopcodes and NI/CSU loopback emulation
- ﾛ Automatic protection switching (APS) and service disruption time (SDT) measurements
- ﾛ Multichannel SDT measurements and real-time error/alarm monitoring for all STS-1/AU-4 channels
- ﾛ Round-trip delay measurements
- ﾛ DS1/DS3 auto detection of line-code framing and test pattern
- ﾛ Dual DS1/DS3 receiver testing
- ﾛ Independent transmitter and receiver testing
- ﾛ Through mode analysis
- ﾛ Intrusive Through mode
- ﾛ Programmable error/alarm injection
- ﾛ DS1 FDL
- ﾛ Fractional T1/E1 testing
- ﾛ DS3 FEAC
| FTB-8130NGE | |
| Next-generation SDH 10 Gbit/s and OTN 10.7 Gbit/s | |
| Supports up to 10/10.7 Gbit/s optical rates, as well as electrical DSn/PDH interfaces | |
| Test Interfaces | |
| SDH: STM-0e, STM-1e, STM-0, STM-4, STM-16, STM-64 | |
| DSn: DS1, DS3, Dual DS1 Rx, Dual DS3 Rx | |
| PDH: E1, E2, E3, E4 | |
| Ethernet: 10/100/1000M electrical, 100/1000M optical and 10 GigE LAN/WAN | |
| FC: 1x, 2x, 4x, 10x | |
SDH/PDH
| Optical interfaces | STM-1, STM-4, STM-16, STM-64 |
| Available wavelengths (nm) | 1310, 1550 |
| Electrical interfaces | 1.5M (DS1), 2M (E1), 8M (E2), 34M (E3), 45M (DS3), 140M (E4), STM-0e, STM-1e |
| 2M framing | Unframed, PCM30, PCM31, PCM30 CRC-4, PCM31 CRC-4 |
| 8M, 34M, 140M framing | Unframed, framed |
| Clocking | Internal, loop-timed, external (MTS/SETS), 2 MHz, inter-module |
For full EXFO FTB-8130NGE product specifications, please click here: EXFO FTB-8130NGE
EXFO FTB-8130NGE Transport Blazer 2.5 & 10 Gigabit SDH Test Module
Works With FTB-200, FTB-200-V2, & FTB-500 Testing Platforms!
(Testing Platforms NOT INCLUDED)
FTB-8130NGE Installed Options:
- SK-SmartMode = Real-time signal discovery and alarm/error monitoring per channel
- SK-DSN = Digital Signal Testing
- SK-PDH = PDH Testing Interface Enabled
- SK-155M = 155 Mbit/s (STM-1)
- SK-2488M = 2.5 Gbit/s (STM-16)
- SK-622M = 622 Mbit/s (STM-4)
- SK-9953M = 10G Gbit/s (STM-64)
- SK-SDH = SDH Testing Interface Enabled
Includes Accessories As Listed
FTB-8130 NGE FTB 8130NGE 8130
EXFO FTB-8130NGE FTB8130NGE Transport Blazer Module Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC#: 39850
- EXFO FTB-8130 Transport Blazer SONET/SDH Test Module w/ Options: (BC# 39850)
- SK-SmartMode = Real-time signal discovery and alarm/error monitoring per channel SK-DSN = Digital Signal Testing
- SK-PDH = PDH Testing Interface Enabled
- SK-155M = 155 Mbit/s (STM-1)
- SK-2488M = 2.5 Gbit/s (STM-16)
- SK-622M = 622 Mbit/s (STM-4)
- SK-9953M = 10G Gbit/s (STM-64)
- SK-SDH = SDH Testing Interface Enabled
- (2) Avago AFBR-57M5APZ Transceivers 850nm
- (2) BNC Cables
- (2) MM LC-LC Fiber Optic Duplex Cables