Fujikura FAT-02 with box

Fujikura FAT-02 Fiber Arrangement Tool

Fluke Etherscope II kit with accessories

Fluke EtherScope Series II 2 Network Assistant

EXFO PPM-350B-EG PON Singlemode Power Meter PPM-352B-EG-EA-VZ1

$595.00
Availability: Out of stock
SKU
4P89

Condition: Refurbished

Warranty: 1 YEAR WARRANTY

Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!

EXFO PPM-352B-EG The marketメs first BPON/EPON/GPON power meter
 

  • New PPM-352B-EG model: the only power meter truly optimized for EPON and GPON architectures
  • Pass/warning/fail indicators (10 threshold sets) for easy assessment of power valuesラanywhere on the network
  • Simultaneous measurement and display of all PON signalsラvoice, data and video
  • Filtered measurements, providing distinct power values for each signal (1310 nm, 1490 nm and 1550 nm)
  • Available in two-port pass-through configurations* enabling full OLT-to-ONT communication while testing, as well as in one-port configurations
  • The most easy-to-use instrument of its kind: simply connect the fiber and read the results
  • Extended-range option for testing at the central office (CO) and before the splitter
  • Go-anywhere versatility: enables quick, accurate testing all across the network

 

PPM-352B-EG Configuration:
 

  • Two-port pass-through: all wavelengths (1310, 1490, 1550); Upstream Measurement
  • Two-port pass-through: all wavelengths (1310, 1490, 1550); for up to 2.5 Gb/s
  • Downstream RF video signal (1550 nm)
  • Upstream BPON ONT signal for up to 622 Mb/s, as per ITU 983 (A, B, C)
  • Upstream EPON and GPON ONT signal for up to 1.25 Gb/s, as per ITU 984 and IEEE 802.3ah

 

The industryメs first PON-specific power meter, the PPM-350B is the flagship of EXFOメs line of test instruments specifically intended for FTTH and FTTP systems.

 

Service Activation Testing

 

Optimizing network reliability requires that all PON signals be measured all the way through service activation to ensure they meet established standards. The PPM-350B offers the features to address this need:

  • Pass-through connection for ONT signal measurement and simultaneous measurement of all PON signals
  • Filtered detectors for individual measurement of each wavelength
  • Upstream burst detection at 1310 nm

 

Troubleshooting Testing

 

Throughout the maintenance phase, various transmission problemsラfiber cuts, damaged/dirty connectors, macrobendings, optical transmitter failure, etc.ラmay ultimately cause signal loss or degradation. Benefit from the PPM-350Bメs troubleshooting functionalities:

  • Quick, on-site test and measurement of PON signals, anywhere on the network
  • Fault identification and isolation

 

Correctly measuring PON signals can be a challenging task: not only can a single fiber carry up to three signals, but the upstream signal coming from the ONT operates in burst mode, which means that it is only active during its モallowedヤ timeslot. This is true whether the network is based on the BPON, EPON or GPON technology. Moreover, the timeslot is shorter in higher-speed networks such as EPON and GPON. Designed with this in mind, the PPM-350B PON Power Meter delivers accurate results for burst signals.

 

Groundbreaking TechnologyラTwo-Port Pass-Through
The PPM-352B two-port model acts as a pass-through device, which means that it is connected between the OLT and the ONT. A small percentage of the signal is extracted for use by the power meter's detectors.

 

This approach enables all wavelengths to be used simultaneously. Also, since the PON equipment can keep functioning normally, the ONT continues to operate (to respond to the OLT), and therefore to transmit and have its laser on.

 

Up to 10 User-Definable Threshold Sets
Depending on the location of the test and the type of equipment used, different threshold values can be required. The PPM-350B enables you to select from up to 10 threshold setsラeach set consisting of three wavelengths (1310, 1490 and 1550 nm) having their own pass, warning and fail thresholds. These values can be configured via the HHDT PC-based software.

 


EXFO PPM-350B-EG Specifications:

 

Power measurement range ヨ pass zone 1310 nm 5.5 to ヨ24
for continuous data stream (dBm) 1490 nm 1 to -33
  1550 nm 15 to -36
Burst mode measurement capability:   Splitter to ONT
Burst mode measurement range b (dBm) 1310 nm 5.5 to -24
Pass through insertion loss b (dB)   1.5
Spectral passband (nm) 1310 nm 1260 to 1360
  1490 nm 1480 to 1500
  1550 nm 1539 to 1565
Power uncertainty at calibrated   0.5
wavelengths b, d (dB)    
Refresh rate of display (Hz)   2.5
Calibrated wavelengths (nm) 1310, 1490, 1550 1310, 1490, 1550
Threshold sets 10 configurable threshold sets with threshold naming
Autonomy b (hours)   > 30
Number of ports   2




For full EXFO PPM-350B product specifications, please click here: EXFO PPM-350B

EXFO PPM-350B Singlemode PON Power Meter For FTTx Activation

Power Meter:
- 1310nm
- 1490nm
- 1550nm

Upstream EPON and GPON ONT signal for up to 1.25 Gb/s, as per ITU 984 and IEEE 802.3ah

Includes Carrying Case & Accessories As Listed

PPM-352 PPM-350 PPM352 PPM350 PPM352B PPM 352 350 352B 350B 352B-EG

EXFO PPM-350B PPM350B SM Fiber Power Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

 

BC# 40919-L/T*

  • EXFO PPM-352B-EG-EA-VZ1 PON Power Meter (BC# 40919-L/T*)
    • Power Meter:
      • 1310nm
      • 1490nm
      • 1550nm
    • (2) SC Connectors
  • (2) SM SC-SC APC Fiber Cables
  • AC Adapter/Charger
  • User Manual On CD-ROM
  • Carrying Case (G)