Authorize.Net Secure Checkout   PayPal Logo  
Buy Now Pay Later  
LAN Cable Certifiers Fluke Networks Fluke DSP Cable Analyzer Fluke DSP-4300
 
 

 



Share
 

  Click Here To View Our Return Policy  
 

1H53 - FLUKE DSP-4300 Digital Cat5/6 SM MM Cable Analyzer

FLUKE Networks DSP-4300 Digital Cable Analyzer with SM & MM Fiber Test Kit
Test & Certify Cat5/5e Cat6 LAN Cable, Multimode 850nm/ 1300nm & SingleMode 1310nm/ 1550nmn Fiber Installations.



Price: $4,795.00 / Each


 
 
 
Condition Refurbished / Calibrated
Warranty 90 Day Exchange
Included
  • DSP-4300 Cable Analyzer
  • DSP-4300SR Smart Remote
  • Fluke DSP Series Calibration Module
  • (2) Fluke Basic Link Adapters Cat5/5e
  • (2) Fluke Channel Adapters Cat5/5e/6
  • Fluke DSP-FOM (850nm, 1300nm, 1310nm & 1550nm Meter)
  • Fluke DSP-FOS (Optical power source generates both 850nm and 1300nm wavelengths)
  • EXFO FLS-130A (Optical power source generates both 1310nm and 1550nm wavelengths)
  • Fiber Cables
    • (2) MM ST-ST
    • (2) SM SC-ST
  • Carrying Straps
  • BNC-RJ45
  • (2) Battery Packs
  • (2) AC Adapters
  • Talk set Headsets
  • Memory Card Case
  • Card Reader
  • 128MB Memory Card
  • LinkWare Software
  • DSP-FOM User Manual On CD-ROM
  • FOS User Manual On CD-ROM
  • DSP-4300 Series User Manual CD-ROM
  • RS-232 PC Interface Cable
  • Carrying Case
 

It exceeds the Cat 5, Cat 5e, and Cat 6 specifications, achieving Level III accuracy. It also features automatic diagnosing of cable faults, and tells you exactly where the fault is in meters or feet. It is comparable in performance to most desktop models, with the added benefit of being handheld.

 

With its large on-board memory, you can store a full day's results inside, or detach the multimedia card and plug it into your PC. Featuring Fluke Corporation's LinkWare Cable Test Management software, you can easily review and analyze results for both fiber and copper. Software allows you to edit, view, print, and archive your data. You can then export the data to a PDF.

 

With the DSP-4300, you can monitor traffic through your Ethernet. Regardless on whether you're using 10BASE-T or 100BASE-TX, you can detect and measure impulse noise better than any other tester on the market. You can also identify hub port connections and tell what standard is met by the respective connections.

 

The DSP-4000 Series can boost your bottom line by providing fast, accurate testing of high-performance Cat 5e, Cat 6 and fiber optic cabling. Equipped with an exclusive digital platform, this series of testers ensures repeatable accuracy, no matter how many times you retest a link. With high-bandwidth test capabilities to 350 MHz, superior diagnostics and extensive reporting, the DSP-4000 Series provides you with a complete solution for testing, certifying and documenting copper and fiber. And like all Fluke Networks instruments, they're built rugged to withstand the drops and other mishaps that occur in today's network installation environments. The DSP-4300 is the most comprehensive cable testing and certification solution for high-speed copper and fiber networks available.

 

Product Capabilities:

  • Fluke Networks' Fiber Test Kit measures power or power loss in optical fiber links used in premise wiring and LAN networks.

Verify Fiber Optic Performance:

  • The DSP-FTK is compatible with the DSP-4000 Series of cable testers (DSP-4000 / 4100 / 4300).
  • Use the Fiber Optic Power Meter (DSP-FOM ) to measure optical power, in dBm or mW. You can also measure optical power loss (expressed in dB). The power loss measurement (or attenuation) compares the measured light energy at the end of the link (output) to the reference level at the input (the light source).
  • This loss measurement result delivers a true optical loss measurement for the link by subtracting the loss associated with the fiber optic patch cables. You can specify the Pass/Fail limit for loss and also the direction (A-B or B-A) of the measurement.

Manage Test Results:

  • You can record and store any combination of copper or fiber optic Autotest reports with the Fluke DSP-4000 tester. Each test report can be assigned a unique, user-definable label, and can be downloaded to a PC or printed directly from the cable tester to a serial printer.
  • Test reports contain wavelength, measured loss, loss limit, test direction and reference level. The fiber test results may be saved in the tester's memory using a cable name of up to 18 characters long.

 


Copyright © 2003-2011 AAATesters.com | Phone: 419-517-6681 Toll Free: 1-800-548-2381

Find Us On FacebookFind Us On Twitter