Finisar FTLF8524P2BNL - Transceiver Module
PRODUCT FEATURES
- Up to 4.25 Gb/s bi-directional data links
- Hot-pluggable SFP footprint
- Built-in digital diagnostic functions
- 850nm Oxide VCSEL laser transmitter
- Duplex LC connector
- RoHS Compliant and Lead Free
- Up to 500m on 50/125μm MMF, 300m on 62.5/125μm MMF
- Metal enclosure, for lower EMI
- Single 3.3V power supply
- Extended operating temperature range: -20°C to 85°C
APPLICATIONS
- Tri-Rate 1.063/2.125/4.25 Gb/s Fibre Channel
- 1.25 Gb/s 1000Base-SX Ethernet (Rate selectable version)
Finisarﾀﾙs FTLF8524P2BNL Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They are compatible with Fibre Channel FC-PI-2 Rev. 7.0. Rate Selectable versions are also compatible with Gigabit Ethernet as specified in IEEE Std 802.3. They are RoHS compliant and lead-free per Directive 2002/95/EC and Finisar Application Note AN-2038. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.
Pin Descriptions
| Pin | Symbol | Name/Description |
| 1 | VEET | Transmitter Ground (Common with Receiver Ground) |
| 2 | TFAULT | Transmitter Fault. Not supported. |
| 3 | TDIS | Transmitter Disable. Laser output disabled on high or open. |
| 4 | MOD_DEF(2) | Module Definition 2. Data line for Serial ID. |
| 5 | MOD_DEF(1) | Module Definition 1. Clock line for Serial ID. |
| 6 | MOD_DEF(0) | Module Definition 0. Grounded within the module. |
| 7 | Rate Select | Open or Low = High = 1.063 Gb/s or 2.125 Gb/s Fibre Channel, 1.25 Gb/s Gigabit Ethernet (Low Bandwidth) 2.125 or 4.25 Gb/s Fibre Channel (High Bandwidth) |
| 8 | LOS | Loss of Signal indication. Logic 0 indicates normal operation. |
| 9 | VEER | Receiver Ground (Common with Transmitter Ground) |
| 10 | VEER | Receiver Ground (Common with Transmitter Ground) |
| 11 | VEER | Receiver Ground (Common with Transmitter Ground) |
| 12 | RD- | Receiver Inverted DATA out. AC Coupled |
| 13 | RD+ | Receiver Non-inverted DATA out. AC Coupled |
| 14 | VEER | Receiver Ground (Common with Transmitter Ground) |
| 15 | VCCR | Receiver Power Supply |
| 16 | VCCT | Transmitter Power Supply |
| 17 | VEET | Transmitter Ground (Common with Receiver Ground) |
| 18 | TD+ | Transmitter Non-Inverted DATA in. AC Coupled. |
| 19 | TD- | Transmitter Inverted DATA in. AC Coupled. |
| 20 | VEET | Transmitter Ground (Common with Receiver Ground) |
Absolute Maximum Ratings
| Parameter | Symbol | Min | Typ | Max | Unit |
| Maximum Supply Voltage | Vcc | -0.5 | 4 | V | |
| Storage Temperature | TS | -40 | 85 | °C | |
| Case Operating Temperature | TA | -20 | 85 | °C | |
| Relative Humidity | RH | 0 | 85 | % |
Electrical Characteristics (TA = -20 to 85 °C, VCC = 3.0 to 3.6 Volts)
| Parameter | Symbol | Min | Typ | Max | Unit |
| Supply Voltage | Vcc | 3 | 3.6 | V | |
| Supply Current | Icc | 180 | 240 | mA | |
| Transmitter | |||||
| Input differential impedance | Rin | 100 | Ω | ||
| Single ended data input swing | Vin,pp | 150 | 1200 | mV | |
| Transmit Disable Voltage | VD | 2 | Vcc | V | |
| Transmit Enable Voltage | VEN | Vee | Vee+ 0.8 | V | |
| Receiver | |||||
| Single ended data output swing | Vout,pp | 300 | 350 | 550 | mV |
| Data output rise time | tr | 120 | ps | ||
| Data output fall time | tf | 120 | ps | ||
| Mask Margin | 40% | ||||
| LOS Fault | VLOS fault | 2 | VccHOST | V | |
| LOS Normal | VLOS norm | Vee | Vee+0.8 | V | |
| Power Supply Rejection | PSR | 100 | mVpp | ||
| Deterministic Jitter Contribution @ 2.125 Gb/s | RX Ãﾄ DJ | 51.7 | ps | ||
| Determinstic Jitter Contribution @ 4.25 Gb/s | 23.5 | ps | |||
| Total Jitter Contribution @ 2.125 Gb/s | RX Ãﾄ TJ | 122 | ps | ||
| Total Jitter Contribution @ 4.25 Gb/s | 61 | ps |
Optical Characteristics (TOP = -20 to 85 °C, VCC = 3. 00 to 3.60 Volts)
| Parameter | Symbol | Min | Typ | Max | Unit |
| Transmitter | |||||
| Output Opt. Pwr: 50 or 62.5 MMF | POUT | -9 | -2.5 | dBm | |
| Optical Wavelength | ë | 830 | 860 | nm | |
| Spectral Width | ó | 0.85 | nm | ||
| Optical Modulation Amplitude @ 4.25 Gb/s | OMA | 247 | ìW | ||
| Optical Modulation Amplitude @ 2.125 Gb/s | OMA | 196 | ìW | ||
| Optical Modulation Amplitude @ 1.0625 Gb/s | OMA | 156 | ìW | ||
| Optical Rise/Fall Time | tr/ tf | 90 | ps | ||
| Relative Intensity Noise | RIN | -118 | dB/Hz | ||
| Deterministic Jitter Contribution @ 2.125 Gb/s | TX Ãﾄ DJ | 56.5 | ps | ||
| Deterministic Jitter Contribution @ 4.25 Gb/s | TX Ãﾄ DJ | 28.2 | ps | ||
| Total Jitter Contribution @ 2.125 Gb/s | TX Ãﾄ TJ | 119 | ps | ||
| Total Jitter Contribution @ 4.25 Gb/s | TX Ãﾄ TJ | 56.5 | ps | ||
| Extinction Ratio @ 1.25 Gb/s | ER | 9 | dB | ||
| Mask Margin | 45% | ||||
| Receiver | |||||
| Receiver Sensitivity = 1.0625 Gb/s | RxSENS | -20 | dBm | ||
| Receiver Sensitivity = 2.125 Gb/s | RxSENS | -18 | dBm | ||
| Receiver Sensitivity = 4.25 Gb/s | RxSENS | -15 | dBm | ||
| Receiver Sensitivity = 1.25 Gb/s | RxSENS | -20 | dBm | ||
| Stressed RX sens. =1.0625 Gb/s | 0.055 | mW | |||
| Stressed RX sens. =2.125 Gb/s | 0.096 | mW | |||
| Stressed Rx sens. = 4.25 Gb/s | 0.138 | mW | |||
| Stressed RX sens. =1.25 Gb/s | -13.5 | dBm | |||
| Average Receiver Power | RxMAX | 0 | dBm | ||
| Receiver Elec. 3 dB cutoff frequency | 1500 | MHz | |||
| Receiver Elec. 3 dB cutoff frequency | 2500 | MHz | |||
| Optical Center Wavelength | ëC | 770 | 860 | nm | |
| Optical Return Loss | 12 | dB | |||
| LOS De-Assert | LOSD | -20 | dBm | ||
| LOS Assert | LOSA | -30 | dBm | ||
| LOS Hysteresis | 0.5 | dB |
Includes:
Finisar SFP Transceiver Plugin Module FTLF8524P2BNL
Finisar FTLF8524P2BNL FTLF-8524P2BNL SFP Transceiver Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.