|
The SpotCheck ADSL Presence Tester is a basic go/no-go ADSL modem
verification unit. The unit is optimized for use by telephone company central
office technicians to verify their ADSL wiring and turn-up has been completed
successfully. It verifies the ADSL line is provisioned and physically configured
correctly. Installation and maintenance technicians can also use the unit at a
customer premise to check for ADSL presence. Simply connect the cord to the line
to be tested and turn on the power for the SpotCheck ADSL Presence Tester. The
unit will identify modem sync with its easy-to-read LEDs. If it’s a green light,
it’s a go!
Features:
Basic go-no-go ADSL modem verification unit
Optimized for
use by Central Office technicians to verify that their ADSL (2) wiring and
turn-up has been completed successfully
Provides the customer with an
inexpensive way of verifying that the ADSL line is provisioned and physically
configured correctly
Modem specification: Westell 6100 modem, T1.413
compliant, G.992.1
Efficient basic tester for independent telephone company
personnel
Specifications:
Electrical
Current Range (Off-Hook)
10 mA to 100 mA
DC Resistance (Off-Hook) 150 O nominal
(On-Hook) >3 MO
AC Impedance (Off-Hook) 600 O
nominal; 300 Hz to 3400 Hz
(On-Hook) >120 kO; 300 Hz to 3400
Hz
Rotary Dial Output
Pulsing Rate 10 pps ±1 pps
Break/Make Ratio 60/40
Interdigit Interval
>300 ms
Resistance During Break >100 kO
DTMF Output
Tone Frequency Error ±1.5 % maximum
Tone Level -3 dBm combined (typical)
High versus Low
Tone Difference 2 dB ± 2 dB
Memory Dialing
Memory Capacity 10 speed dial memories
plus one last number redial
Memory
Digit Capacity 23 digits per memory
PBX Pause Duration User programmable; default of 4 seconds
Hook Flash Duration User programmable; default of 600 ms
Automatic Speaker Shut Off Duration User programmable; default
of 2 minutes
Battery 9 V alkaline or lithium battery
Includes:
Fluke Networks Spotcheck ADSL Modem Verification Unit
Manual
On CD-ROM
| 
