Fluke 125 40 MHz Industrial ScopeMeter

The Fluke 125 Industrial ScopeMeter is a rugged, reliable solution for industrial troubleshooting and installation applications.  Integrated test tool, with oscilloscope, multimeter, and ﾓpaperlessﾔ recorder in one affordable, easy-to-use instrument.

As the latest addition to the Fluke 120 Series ScopeMeters, the Fluke 125 has advanced features for installing and troubleshooting field buses and electrical machines. The ScopeMeter performs a bus health test on industrial buses, for example, which are rapidly becoming a headache for Service, Maintenance and Installation (SMI) engineers. The test quickly determines whether the bus is working and if not, helps to identify the cause. The rugged ScopeMeter works with many Industrial Networks including AS-I bus, CAN-bus, Profibus, Foundation Fieldbus and Ethernet.

In addition, the instrument can test power input, sensor timing, motor windings, drive output timing and power measurements ﾖ thus eliminating the need for expensive, more specialized test equipment.

The ScopeMeters are 600 V CAT III safety certified for machinery, instrumentation, control and power systems. The new Fluke 125 has all the features of the successful Fluke 123 and Fluke 124 ScopeMeters and, in addition to the bus health test, it also carries out effective (Vpwm) voltage measurements of motor drive output, and has 0.01 ohm resolution on the 50 Ohms range for testing motor windings. User-named data setups make for easy use.  The 125 extends the 120 series by adding;  Industrial networks bus health testing and Measure harmonics and power, VA, VAR, W, and PF

Simple good/bad readout for Field Bus parameters
The bus health tests of the Fluke 125 ScopeMeter find defects like bad or missing terminators, bad cable splits, missing links, incorrect line loading, line interrupts, short circuit conditions and reflections. The instrument continuously acquires the bus signal and compares parameters to official specifications. It displays bus speed and measures signal quality with ﾑgoodﾒ or ﾑbadﾒ indications for parameters like rise- and fall-time, amplitude, bias level, pulse width and distortion. The instrument checks at the hardware (not protocol) level. An eye-pattern mode allows for a visual check of signal integrity.

Harmonic analysis and power consumption
Extended Harmonics Analysis of mains waveforms reaches up to the 33rd harmonic. That includes the important 3rd and 5th harmonics, which may be the cause of overheating in neutral wire or motor, as well as flat-topping of the mains voltage from non-linear loads like SMPS units. The wide frequency range covers railway (16.66 Hz) and airplane systems (400 Hz) applications.

Power measurements cover single-phase and balanced-3-phase, 3-wire systems (Watt, VA, VAR and Power Factor). Unlike PQ analyzers, the instrument is not restricted to 50/60 Hz, and can measure power at the output of motor drives and frequency converters.

The Vpwm measurement capability shows the output voltage of motor drives exactly as the motor perceives it. For electrical and combustion engines, the 125 can indicate revolutions-per-minute (rpm), and can be set up for 1 or 2 rotations per pulse, or 1 rotation per 2 or 4 pulses. A 50-ohm resistance range brings excellent 0.01-ohm resolution for checking motor windings and other wiring.

Series automates measurements from industrial systems
The Fluke ScopeMeter 120 Series performs automated measurements on motor, switch and similar signals. The 123 has a 20 MHz bandwidth, while the 124 is a 40 MHz bandwidth instrument that performs more advanced measurements. The 125 is also a 40 MHz instrument but includes features for testing Field Bus and motors. All incorporate Flukeﾒs unique Connect-and-View to recognize signal patterns, and automatically set up correct triggering.

Features

• Industrial Network Bus Health mode
• Power Measurements for single phase and balanced 3-phase systems
• Harmonics mode, up to 33rd harmonic
• High resolution, low impedance measurements
• Reading of Hz and Rotations Per Minute (RPM) for use with electrical and combustion engines
• Measurement of Vpwm for use on motor drive outputs
• ﾑSave and recallﾒ using a user-defined name
• Fluke i400s Current Clamp included as a standard

• Bus Health mode gives a clear ﾓGoodﾔ / ﾓBadﾔ indication for the electrical signals on industrial buses and networks, such as CAN-bus, Profi-bus, RS-232 and many more. The Fluke 125 validates the quality of the electrical signals as soon as any electrical signals are passed along the network. It checks the signal levels and speed, transition times and distortion, and compares these to the appropriate standards to help you find errors like improper cable connections and terminators. It helps you find the source of error in case communication comes to a halt. All the commonly found industrial network types are supported!
• Power Measurements for single phase and balanced 3-phase systems. The Fluke 125 can directly present you the Total Power (Watts), Apparent Power (VA), Reactive Power (VAR) and the Power Factor (PF), over a wide range of applied frequencies, including those seen with motor drives and inverters. As a result, you are able to easily see the effects on the various power measurements during start-up or under changing operational conditions. A current clamp is included as a standard.
• Harmonics mode graphically displays harmonics up to the 33rd harmonic to assist in fault-finding, e.g. with large non-linear loads.
• RPM and Hz reading for use with electrical and combustion engines.
• Vac pwm for use on motor drive outputs, reading the true output voltage experienced by the motor itself.
• Low impedance measurements giving a 0.01 ohms resolution for motor windings and the like.

Fluke 125 Industrial ScopeMeter, 25MS/s Dual-Channel 40MHz HandHeld Oscilloscope

The Fluke 125 has advanced features for installing and troubleshooting field buses and electrical machines.

The rugged ScopeMeter works with many Industrial Networks including AS-I bus, CAN-bus, Profibus, Foundation Fieldbus and Ethernet. 

Includes Carrying Case & Accessories As Listed

125/003 125/S

Fluke 125 Fluke-125 Scopemeter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 33089-L/T*

• Fluke 125 40MHz Industrial Scopemeter (BC# 33089-L/T*)
• (2) Fluke STL120 Voltage Probes
• Fluke Hard point Test Lead
• Fluke Optical Interface Cable
• AC Adapter/Charger
• User Manual On CD-ROM
• Carrying Case (G)

Having trouble viewing this file? Click this link to download