The Fluke 1625 is distinctive earth ground testers that can perform all four types of earth ground measurement. Specifically, the Fluke 1625 tester is able to measure earth ground loop resistances using only clamps â?? called Stakeless testing. This method doesnâ??t require the use of earth ground stakes or the disconnection of ground rods.
Testing Methods
- 3- and 4-Pole Fall of Potential â?? standard earth ground testing using two ground stakes
- Selective testing â?? without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp.
- Stakeless testing â?? innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance.
The Fluke 1625 offers these advanced features
- Automatic Frequency Control (AFC) â?? identifies existing interference and chooses a measurement frequency to minimize its effect, providing a more accurate earth ground value.
- R* measurement â?? calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to-earth ground would see.
- Adjustable limits â?? for quick test result verification.
Features:
- 3- and 4-pole earth ground measurement
- 4-Pole soil resistivity testing
- 2-pole resistance measurement AC
- 2- and 4-pole resistance measurement DC
- Selective testing, no disconnection of ground conductor (1 clamp)
- Stakeless testing, quick ground loop testing (2 clamps)
- Earth impedance measurement at 55 Hz
- Automatic frequency control (AFC) (94, 105, 111, 128 Hz)
- Measuring voltage switchable 20/48V
- Programmable limits, settings
- Continuity with buzzer
Specifications:
| RA 3-pole ground resistance measurement (IEC 1557-5) |
| Measuring Voltage |
|
| Short circuit current |
|
| Measure frequency |
|
| Resolution |
|
| Measuring range |
|
| Intrinsic error |
|
| Operating error |
|
| RA 4-pole ground resistance measurement (IEC 1557-5) |
| Measuring Voltage |
|
| Short circuit current |
|
| Measure frequency |
|
| Resolution |
|
| Measuring range |
|
| Intrinsic error |
|
| Operating error |
|
| RA 3-pole ground resistance measurement with current clamp |
| Measuring Voltage |
|
| Short circuit current |
|
| Measure frequency |
|
| Resolution |
|
| Measuring range |
|
| Intrinsic error |
|
| Operating error |
| ± (10 % of reading + 5 d) |
|
| RA 4-pole selective ground resistance measurement with current clamp |
| Measuring Voltage |
|
| Short circuit current |
|
| Measure frequency |
|
| Resolution |
|
| Measuring range |
|
| Intrinsic error |
|
| Operating error |
| ± (10 % of reading + 5 d) |
|
| Stakeless ground loop measurement |
| Measuring Voltage |
|
| Measure frequency |
|
| Noise current (Iext) |
|
| Resolution |
|
| Measuring range |
|
| Intrinsic error |
|
| Operating error |
| ± (10 % of reading + 5 d) |
|
| Environmental Specifications |
| Working temperature |
|
| Operating Temperature |
|
| Nominal temperature |
|
| Storage Temperature |
|
| Climatic class |
|
C1 (IEC 654-1), -5 °C to + 45 °C, 5 % to 95 % RH |
|
| Protection type |
|
IP56 for case, IP40 for battery door according to EN 60529 |
|
| Safety Specifications |
| Safety Rating |
|
| Mechanical & General Specifications |
| Display |
| 2999 Digit LCD â?? 7 segment liquid crystal display with special symbols and backlight |
|
| Size |
|
| Weight |
| Fluke 1623 + 1625 |
1.1 kg (including batteries) |
|
| Warranty |
|
| Battery Life |
| Typical 3000 measurements (RE+RH = 1 k?) |
| Typical 6000 measurements (RE+RH = 10 k?) |
|
For full Fluke 1625 product specifications, please click here: Fluke 1625
Fluke 1625 Advanced Earth / Ground Tester Geo Kit
Automatic Frequency Control (AFC) – identifies existing interference and chooses a measurement frequency to minimize its effect, providing a more accurate earth ground value.
Includes Carrying Case & Accessories As Listed
Fluke 1625 Fluke-1625 Earth Ground Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 42747-L/T*
