On Sale! Fluke 719Pro 300G Electric Pressure Calibrator Model 719-Pro 300G Fluke 719

Description

Fluke 719Pro 300G Pressure Calibrator
The 719Pro Electric Pressure Calibrator is the ideal test tool for calibrating high accuracy transmitters, pressure switches and pressure gauges.

The 719Pro includes a full functioning loop calibrator that sources, simulates and measures mA signals and more. The large backlit screen displays three parameters at once:

Pressure measurement from internal or external sensor
Sourced/simulated or measured mA values

Features:

Unique integrated electric pump for one handed pressure calibration
Test pressure switches easily with easy-to-use switch test function
Precision pressure adjust vernier for easy and accurate pressure calibration
Ideal accuracy and performance (0.025 %) for reference class transmitter calibration
30 PSI, 150 PSI and the new 300 PSI pressure ranges
Programmable pressure calibrator pump limit:
- eliminates over-pressurization
- allows the user to program target pressures for pumping
Pump cleanout ports reduce pump failures from moisture and fluid damage

Specifications:

Pressure measurement	Range	Resolution	Accuracy	Comment
Fluke-719Pro-300G	-12 to 300 PSI / -0.8 to 20 bar	-0.8 to 20 bar 0.01 PSI, 0.001 bar	± 0.025 % of full scale, 6 months ± 0.035 % of full scale, 1 year	Dry Air and non-corrosive gas only
Temperature effect (all ranges)			Add ± 0.002 % F.S./°C for temps outside of 15 °C to 35 °C	No effect on accuracy on all functions from 15 °C to 35 °C
Function	Range	Resolution	Accuracy (1 year)	Comment
mA dc (simulation and measurement)	0-24 mA dc	0.001 mA	± 0.015 % of reading ± 2 counts	1000 ohm maximum load in mA source, 26 V dc maximum voltage in mA simulate
Volts dc (measurement only)	30 V dc	0.001 V	± 0.015 % of reading ± 2 counts	No AC voltage measurement, do not exceed 30 V dc
Temperature (measurement only, Pt100 RTD)	-50 to 150 °C (-50 °F to 302 °F)	0.01 °C 0.01 °F	Temperature ± 0.1 °C (0.2 °F)	± 0.25 °C (± 0.45 °F) combined uncertainty when using 720 RTD probe (optional accessory)
Loop power supply	24 V dc	N/A	24 mA at 24 V
Temperature effect (all functions)			Add ± 0.002 % F.S./°C for temps outside of 15 °C to 35 °C	No effect on accuracy on all functions from 15 °C to 35 °C
Environmental
Operating temperature	-10 °C to +50 °C
Storage with batteries per battery manufacturer’s specification within storage specification below
Storage temperature (without batteries)	-20 °C to +60 °C
Power requirements
Battery	Eight (8) standard Alkaline AA batteries
Battery life	300 pump cycles to 150 PSI minimum; 1000 pump cycles to 30 PSI; 100 pump cycles to 300 PSI minimum
Physical
Dimensions (HxWxD)	24.13 cm x 11.18 cm x 7 cm (9.5 in x 4.4 in x 2.8 in)
Weight	With holster 1.2 kg (2.5 lb)
Connections
Pressure	1/8 inch female NPT
Electrical	Standard banana jacks
RTD	4 pin miniature circular
External module	6 pin miniature circular
Engineering units (configurable)
psi, bar, mbar, kPa, kgcm2 , cmH2O@4 °C, cmH2O@20 °C, mH2O@4 °C, mH2O@20 °C, inH2O@4 °C, inH2O@20 °C, inH2O@60 °F, mmHg@0 °C, inHg@0 °C, ftH2O@4 °C, ftH2O@20 °C, ftH2O@60 °F

For full Fluke 719 Pro 300G product specifications, please click here: Fluke 719Pro 300G

Additional Information

Fluke 719Pro 300G Electric Pressure Calibrator

The 719Pro Electric Pressure Calibrator is the ideal test tool for calibrating high accuracy transmitters, pressure switches and pressure gauges

Includes Carrying Case & Accessories As Listed

Fluke 719Pro 300G 719-Pro 300G Electric Pressure Calibrator Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 38603-L/T*

Included