Fluke 787 ProcessMeter DMM Loop Calibrator

$695.00

Availability: In stock

SKU

10H09

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

Description

Fluke 787 Process Meter
The Fluke-787 ProcessMeter combines a DMM and a Loop Calibrator in one rugged, handheld tool - for about what you would expect to pay for a loop calibrator alone. The 787 starts with the Fluke-87 DMM you know and trust, then adds ability to measure, source, and simulate DC loop current with 0.05% accuracy and 1 micro-amp resolution. When you carry the ProcessMeter, you're ready for any loop troubleshooting or calibration task. And since itﾒs dust- and splash-resistant and EMI-shielded, the 787 can survive in your tool belt.

Features:

DMM and Loop Calibrator in one tool
Precision 1000V, 440 mA digital Multimeter
Measure AC and DC volts, AC and DC current, resistance, continuity, and frequency 0.1% DC voltage accuracy 0.05% DC current accuracy, 1 uA resolution to 30 mA Simultaneous mA and % of scale readout True RMS AC voltage measurement to 1 kHz Frequency measurement to 20 kHz Min/Max/Average/Hold/Relative modes Diode Test and Continuity Beeper
DC current source / loop calibrator 20 mA current source / simulator Simultaneous mA and % of scale readout Manual Step (25%, Coarse, Fine) plus Auto Step and Auto Ramp
Clear LCD with backlight; 4,000 counts (30,000 counts for DC current)
Externally accessible battery for easy battery changes
V overload protection on V, ohms, frequency
V overload protection on mA, backed-up by 440 mA 1000V fuse
Designed to meet 1000 volt IEC 1010 Cat III standards

Measurement Function	Range and Resolution	Best Accuracy (% of reading + LSD)
VDC	400.0 mV, 4.000V, 40.00 V, 400.0 V, 1000 V	0.1% + 1
VAC (true RMS)	400.0 mV, 4.000V, 40.00 V, 400.0 V, 1000 V	0.7% + 4
mADC	30.000 mA	.05% + 2
A DC	1.000 A (0.440A continuous)	0.2% + 2
A AC	1.000 A (0.440A continuous)	1% + 2
Resistance	400.0 Ohms, 4.000k, 40.00 k, 400.0 k, 4.0 M, 40M	0.2% + 1
Frequency (0.5 Hz to 20 kHz)	199.99 Hz, 1999.9 Hz, 19.999 kHz	.005% + 1
Diode Test	2.400 V (shows diode voltage drop)	2% + 1
Continuity	Beeps for resistance < approx 100 ohms

Output Function	Range and Resolution	Drive Capability	Accuracy (% of span)
DC Current Output (Internal battery operation)	0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up) Over-range to 24.000 mA	12 V compliance, or, 500 Ohms, @ 20 mA	.05%
DC Current Simulate (Ext. 24 Volt loop supply)	0.000 to 20.000 mA or 4.000 to 20.000 mA, (selectable at power-up) Over-range to 24.000 mA	1000 Ohms, @ 20 mA	05%
Current adjustment modes	Manual: Coarse, Fine, 25% step Automatic: Slow Ramp, Fast Ramp, 25% step

General Specifications:

Maximum voltage applied between any jack and Earth Ground:	1000 V RMS
Storage Temperature:	-40°C to 60°C
Operating Temperature:	-20°C to 55°C
Temperature Coefficient:	0.05 x (specified accuracy) per °C (for temperatures < 18°C or > 28°C)
Relative Humidity:	95% up to 30°C; 75% up to 40°C; 45% up to 50°C; 35% up to 55°C
Vibration:	Random, 2g, 5-500 Hz.
Shock:	1 meter drop test
Safety:	Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No.1010..1-92 Over-voltage Category III
Size:	32 mm H x 87 mm W x 187 mm L (1.25 in H x 3.41 in W x 7.35 in L)
Size, with holster and Flex-Stand:	52 mm H x 98 mm W x 201 mm L (2.06 in H x 3.86 in W x 7.93 in L)
Weight:	369 g (13 oz); with holster and Flex-Stand 638 g (22.5 oz)
Battery:	Single 9V Alkaline battery (ANSI/NEDA 1604A or IEC 6LR61)
Battery Life:	50 hours typical (measurement), 12 hours typical (sourcing 12 mA)