|
It exceeds the Cat 5, Cat 5e, and Cat 6 specifications, achieving Level III
accuracy. It also features automatic diagnosing of cable faults, and tells you
exactly where the fault is in meters or feet. It is comparable in performance to
most desktop models, with the added benefit of being handheld.
With its large on-board memory, you can store a full day's results inside, or
detach the multimedia card and plug it into your PC. Featuring Fluke
Corporation's LinkWare Cable Test Management software, you can easily review and
analyze results for both fiber and copper. Software allows you to edit, view,
print, and archive your data. You can then export the data to a PDF.
With the DSP-4300, you can monitor traffic through your Ethernet. Regardless
on whether you're using 10BASE-T or 100BASE-TX, you can detect and measure
impulse noise better than any other tester on the market. You can also identify
hub port connections and tell what standard is met by the respective
connections.
The DSP-4000 Series can boost your bottom line by providing fast, accurate
testing of high-performance Cat 5e, Cat 6 and fiber optic cabling. Equipped with
an exclusive digital platform, this series of testers ensures repeatable
accuracy, no matter how many times you retest a link. With high-bandwidth test
capabilities to 350 MHz, superior diagnostics and extensive reporting, the
DSP-4000 Series provides you with a complete solution for testing, certifying
and documenting copper and fiber. And like all Fluke Networks instruments,
they're built rugged to withstand the drops and other mishaps that occur in
today's network installation environments. The DSP-4300 is the most
comprehensive cable testing and certification solution for high-speed copper and
fiber networks available.
Product Capabilities:
- Fluke Networks' Fiber Test Kit measures power or power loss in optical
fiber links used in premise wiring and LAN networks.
Verify Fiber Optic Performance:
- The DSP-FTK is compatible with the DSP-4000 Series of cable testers
(DSP-4000 / 4100 / 4300).
- Use the Fiber Optic Power Meter (DSP-FOM ) to measure optical power, in
dBm or mW. You can also measure optical power loss (expressed in dB). The
power loss measurement (or attenuation) compares the measured light energy at
the end of the link (output) to the reference level at the input (the light
source).
- This loss measurement result delivers a true optical loss measurement for
the link by subtracting the loss associated with the fiber optic patch cables.
You can specify the Pass/Fail limit for loss and also the direction (A-B or
B-A) of the measurement.
Manage Test Results:
- You can record and store any combination of copper or fiber optic Autotest
reports with the Fluke DSP-4000 tester. Each test report can be assigned a
unique, user-definable label, and can be downloaded to a PC or printed
directly from the cable tester to a serial printer.
- Test reports contain wavelength, measured loss, loss limit, test direction
and reference level. The fiber test results may be saved in the tester's
memory using a cable name of up to 18 characters long.
|
