Fluke Networks DSP-4300 Digital Cable Analyzer
It exceeds the Cat 5, Cat 5e, and Cat 6 specifications, achieving Level III
accuracy. It also features automatic diagnosing of cable faults, and tells you
exactly where the fault is in meters or feet. It is comparable in performance to
most desktop models, with the added benefit of being handheld.
With its large on-board memory, you can store a full day's results inside, or
detach the multimedia card and plug it into your PC. Featuring Fluke
Corporation's LinkWare Cable Test Management software, you can easily review and
analyze results for both fiber and copper. Software allows you to edit, view,
print, and archive your data. You can then export the data to a PDF.
With the DSP-4300, you can monitor traffic through your Ethernet. Regardless
on whether you're using 10BASE-T or 100BASE-TX, you can detect and measure
impulse noise better than any other tester on the market. You can also identify
hub port connections and tell what standard is met by the respective
The DSP-4000 Series can boost your bottom line by providing fast, accurate
testing of high-performance Cat 5e, Cat 6 and fiber optic cabling. Equipped with
an exclusive digital platform, this series of testers ensures repeatable
accuracy, no matter how many times you retest a link. With high-bandwidth test
capabilities to 350 MHz, superior diagnostics and extensive reporting, the
DSP-4000 Series provides you with a complete solution for testing, certifying
and documenting copper and fiber. And like all Fluke Networks instruments,
they're built rugged to withstand the drops and other mishaps that occur in
today's network installation environments. The DSP-4300 is the most
comprehensive cable testing and certification solution for high-speed copper and
fiber networks available.
DSP FTA-420 Fiber Adapters
Complete solution for testing and certifying high-speed Fiber Networks
Fluke Networks offers the most complete line of Fiber Test Adapters for
testing and certifying Single mode, Gigabit and Multimode fiber optic cabling
systems. These Fiber Test Adapters are high-performance, high-productivity
fiber test options for the DSP-4000, DSP-4100 and DSP-4300 Digital
Choose the world's first dual-fiber, dual-wavelength Multimode Fiber Test
Adapter to expand the capabilities of Fluke's Digital Cable Analyzers. It easily
attaches to the Fluke DSP-4300, DSP-4100 and DSP-4000 testers for
bi-directional testing of multimode links. Model DSP-FTA420S measures loss and
length on multimode fiber links easily and accurately. It uses LED light sources
at 850 and 1300 nm. Use this optional high-performance, high-productivity
multimode test adapter to document certified test results. In addition, the
timesaving FindFiber feature provided by the DSP-FTA420S enables users at both
ends to make a quick check for and locate a signal from the other end. Valuable
time spent searching for proper end-to-end connections is minimized.
- Test two fibers and two wavelengths simultaneously, automatically saving
the test results.
- Perform bi-directional testing on both fibers under test and save results
for both in one record.
- Utilize Fluke Networks' CableManager Software for comprehensive results
management and report generation.
- Automatically measure length and propagation delay along with loss.
- Verify optical connectivity and determine which fibers go to which
connectors at a patch panel.
- Communicate with a person on the other end of the fiber.
- Track the maximum and minimum power throughput of the test.
- Withstand drops and other mishaps that occur on the job.
Power supply: ±6 V supplied by the DSP-4000 test
Temperature range: Operating: 0 ºC to +40 ºC; Storage: -10 ºC to +60
Warm-up time: 5 minutes
Humidity range: Operating: 0 % to 75 % RH,
Storage: 0 % to 95 % RH, non-condensing
Dimensions: 3.3” x
4.6” x 1.9” (8.3 cm x 11.6 cm x 4.7 cm)
Weight: 7.6 oz (215
FTA420 - Multimode LED
FTA430 - Singlemode
FTA440 - 850 nm Vertical Cavity Surface Emitting Laser (VCSEL);
nm FP laser
FTA420 - 850 nm and 1300 nm
FTA430 - 1310 nm
and 1550 nm
FTA 440 - 850nm and 1310 nm
FTA420 -20 dBm
(10 mW), typical (into 62.5/125 mm fiber)
FTA430 and FTA440 -10 dBm
output stability (8 hours): ±0.25 dB at 23 °C
Power measurement accuracy: ±0.25 dBm at 23 °C, 45 % RH to
75 % RH, -20
dBm for 850 nm and 1300 nm, -10 dBm for 1550 and 1625
Connector: SC, multimode or singlemode
Calibrated wavelengths: 850 nm, 1300 nm, 1310 nm, 1550 and 1625
Power measurement range: +3 dBm to -50 dBm
linearity: ±0.25 dB at 23 °C
Measured in Loopback
FTA420 - 5000 meters of 62.5 um multimode cable
FTA430 - 10000 meters
of singlemode cable
FTA440 - 5000 meters of 50.0 um multimode cable
measurement accuracy: ±1.5 m plus 2 % of length
Multimode Fiber Test Adapter
Uses LED light sources at 850 nm and 1300 nm wavelenghts