Fluke ESA612 Electrical Safety Analyzer 230V ac

 Fluke Networks ESA612 Electrical Safety Analyzer
The ESA612 Electrical Safety Analyzer represents the next generation in testers for biomedical professionals that perform field service on medical equipment throughout their facilities, in clinics, and anywhere onsite service is required. Portable, lightweight, and designed for operation in tight spaces, the ESA612 offers the functionality of a simulator, multimeter and electrical-safety analyzer in a single test tool.

With selection of two test loads, this versatile product can be used worldwide to test to preventative maintenance electrical safety standards of choice: ANSI/AAMI ES1:1993 (NFPA-99), IEC62353 (VDE 751), and AN/NZS 3551.

The versatility of the multifaceted ESA612 is further expanded with optional automation software, which speeds and simplifies testing and provides high-end-analyzer productivity at software-level investment. Ansur-automated ESA612 standardizes test procedures, compares results to standards limits, and generates and stores reports for total digital data management.


Features:

• Portable, ergonomic, lightweight and easy to use
• Large, easy-to-read display with adjustable contrast
• Human-factors-designed user interface
• Bail design for stand-up testing in field environments
• Five applied parts jacks and easy ECG snap connection with optional expander box
• ECG waveform tests and dual-lead measurements combine the functionality of a simulator, multimeter and electrical-safety analyzer in a single test tool
• Replaceable mains fuses keep the device in the field and out of the repair shop
• Internal memory for 100 test records
• USB connection for use with Ansur and Data Viewer software (for memory download to PC)
• Optional Ansur automation software standardizes test procedures, compares results to standards limits, generates/stores reports and provides total digital data management
• Rigorously tested for rugged field applications, with CE and CSA in addition to the Fluke-quality-design stamp of approval

Specifications:

Voltage
Range (mains voltage)	180 to 264 V ac rms
Range (accessible voltage)	0 V ac to 300 V ac rms
Accuracy	± (2 % of reading + 0.2 V)
Voltage tests	Mains, accessible, and point-to-point
Earth resistance
Mode	Two terminal
Test current	> 200 mA ac
Range	0 W to 2 W
Accuracy	± (2 % of reading + 0.015 W)
Resistance tests	Earth resistance and point-to-point
Equipment current
Mode	AC rms
Range	0 A to 20 A
Accuracy	± 5 % of reading + (2 counts or 0.2 A, whichever is greater)
Duty cycle	15 A to 20 A, 5 min on/5 min off 10 A to 15 A, 7 min on/3 min off 0 A to 10 A continuous
Leakage current
Modes Modes are available in all leakage tests with the exception of MAP leakages that are available only in true-rms	AC + DC (true-rms) AC only DC only
Patient load selection (input impedance)	AAMI ES1-1993 IEC 60601
Crest factor	= 3
Ranges	0 µA to 199.9 µA 200 µA to 1999 µA 2 mA to 10 mA
Frequency response/accuracy DC to 1 kHz 1 kHz to 100 kHz 100 kHz to 1 MHz	± (1 % of reading + (1 µA or 1 LSD, whichever is greater)) ± (2 % of reading + (1 µA or 1 LSD, whichever is greater)) ± (5 % of reading + (1 µA or 1 LSD, whichever is greater))
Leakage tests	Ground wire (earth) Chassis (enclosure) Lead to ground (patient) Lead to lead (patient auxiliary) Lead isolation (mains on applied part) Direct equipment Direct applied part Alternative equipment Alternative applied part Point to point
Mains on applied part test voltage	100 % of mains
Differential leakage
Ranges	10 µA to 199 µA 200 µA to 2000 µA 2 mA to 20 mA
Accuracy	± 10 % of reading + (2 counts or 20 µA, whichever is greater)
Insulation resistance
Ranges	0.5 MW to 20 MW 20 MW to 100 MW
Accuracy	± (2 % of reading + 0.2 MW) ± (7.5 % of reading + 0.2 MW)
Source test voltage	500 V dc 250 V dc
Insulation resistance tests	Mains-PE, AP-PE, Mains- PE, Mains-NE (non-earthed accessible conductive part) and AP- NE (non-earthed accessible conductive part)
ECG performance waveforms
Accuracy	± 2 % ± 5 % for amplitude of 2 Hz square wave only, fixed at 1 mV Lead II configuration
Waveforms ECG complex (BPM) Ventricular fibrillation Square wave (50 % duty cycle) (Hz) Sine wave (Hz) Triangle wave (Hz) Pulse (63 ms pulse width)	30, 60, 120, 180, and 240 0.125 and 2 10, 40, 50, 60, and 100 2 30 BPM and 60 BPM
Power ratings
Mains voltage outlet	230 V ac
Mains voltage inlet power range	180 to 264 V ac rms
Maximum current	16 A
Hz	50 or 60
Environmental specifications
Operating temperature	10 °C to 40 °C (50 °F to 104 °F)
Storage temperature	-20 °C to 60 °C (-4 °F to 140 °F)
Operating humidity	10 % to 90 % non-condensing
Altitude	230 V ac mains supply voltage up to 2,000 m

For full Fluke ESA612 product specifications, please click here: Fluke ESA612

Fluke ESA612 230V ac Electrical Safety Analyzer

The ESA612 offers the functionality of a simulator, multimeter and electrical-safety analyzer in a single test tool

With selection of two test loads, this versatile product can be used worldwide to test to preventative maintenance electrical safety standards of choice: ANSI/AAMI ES1:1993 (NFPA-99), IEC62353 (VDE 751), and AN/NZS 3551

Includes Carrying Case & Accessories As Listed

ESA 612 ESA-612

Fluke ESA612 ESA 612 Electrical Safety Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

 

BC# 46006-L/T*

• Fluke ESA612 European 230V ac Electrical Safety Analyzer (BC# 46006-L/T*)  
• (2) Hard Point Test Leads
• USB PC Interface Cable
• Power Cord
• User Manual On CD-ROM
• Carrying Case (G)

Having trouble viewing this file? Click this link to download