|
Features:
- 200x magnification probe enables inspection of both multimode and
singlemode end-faces inside ports and on patch cords
- Miniature display boasts an exceptionally sharp 1.8" screen
- Troubleshooting is 10 times faster than with traditional scopes
- Grip trigger activation extends battery life
- Various probe adapter tips allow for inspection through many different
connector port types
Use the FT-500 FiberInspector™ Mini to examine installed fiber terminations
or ensure terminations are smooth and clean. Avoid the #1 cause of cause of
fiber link failure: dirty end-faces.
Dirt, dust and other contaminants
are the enemy of high-speed data transmission over optical fiber. Today's
network applications require more bandwidth, making loss budgets tighter than
ever. It is critical that all optical connections are clean and free of
contaminants to ensure application success.
The Fluke Networks FT500
FiberInspector Mini Video Microscope puts the solution to contaminated end-faces
in the palm of your hand. This portable video microscope works ten times faster
than traditional scopes. Simply insert the probe and inspect installed fiber
connectors through the bulkhead adapters without accessing the backside of the
patch panels. Using a video microscope also completely ensures that no harmful
laser light ever reaches your eyes.
Its miniature size makes the
FiberInspector Mini extremely portable and convenient. The device displays
exceptionally sharp images on its 1.8" screen. Extend battery life in the grip
trigger mode, when the device only shows images when squeezing the sides of the
display. With a range of standard and accessory probe tips, end-faces can be
inspected when using many different connector types, including LC
connectors.
|
Specifications |
Details |
| General
Specifications |
| Temperature range |
Operating: 0
°C to 40 °C Storage: -10 °C to +60 °C |
| Humidity range |
Operating: 0 %
to 45 % RH non-condensing Storage: 0 % to 95 % RH
non-condensing |
| Weight
|
8.1 oz (230 g)
(probe and display) |
| Certifications |
CE |
| Probe
Specifications |
| Magnification |
200X |
| Camera type |
0.33 in
(8.38 mm) CMOS sensor |
| Light source |
LED,
>100,000 hr life |
| Lighting technique |
Coaxial |
| Dimensions |
5.5 in x
1.8 in x 1.7 in (140 mm x 46 mm x 44 mm) (length depends on adapter
tip) |
| Display Specifications |
| Display type |
1.8 in (46
cm) TFT LCD |
| Video input |
NTSC |
| Power source |
Rechargeable NiMH battery or ac power |
| AC adapter/ charger |
Charges
six NiMH cells Input: 100-240 Vac, 0.5 A, 47 Hz to 63 Hz Output: 9 V dc,
0.4 A |
| Battery life
|
3 hours
continuous use |
| Dimensions |
3.9 in x
2.8 in x 1.7 in (100 mm x 72 mm x 43 mm, with TPAK
adapter) |
Includes:
- Fluke Networks FT500 FiberInspector Mini Video Fiberscope
- FBET Probe Tips:
- Fluke NetworksFiber Optic Cleaning Cube
- (3) Fluke Networks Fiber Optic Cleaning Cards
- (20) Microcare Connector Cleaning Sticks
- AC Adapter/Charger
- Carrying Case
|
