|
Product Capabilities
Fluke Networks Fiber Test Kit measures power or power
loss in optical fiber links used in premise wiring and LAN networks. The DSP-FTK
is compatible with the DSP Series cable testers, OneTouch™ Network Assistant and
Enterprise LANMeter® test tools.
Verify Fiber Optic Performance
The Fiber Optic Test Kit includes an
optical power meter (DSP-FOM), combination 850/1300 nm LED power source
(DSP-FOS), patch cables, adapters and hard carrying case.
Simplifies Fiber Testing
The Fiber Optic Meter (DSP-FOM) interfaces with
the DSP Series cable testers, OneTouch Network™ Assistant, or Enterprise
LANMeter® using a short twisted-pair patch cable which plugs into the 8-pin
modular jack of these instruments. Just select the wavelength to be measured
with the optical meter's slide switch (850 nm, 1300 nm, and 1550 nm), and the
test tool will input, display, and store the measurement.
Just plug in the modular Fiber Test Adapter (DSP-FTA410S) adapter to the
DSP-4000 CableAnalyzer and you're ready to test fiber for bad connections, bad
splices, broken fibers, and loss of power - from one end of the fiber. With talk
mode, you can easily communicate with your partner.
Allows a Choice of Test Options
Use the DSP-FOM Fiber Optic Power Meter to
measure optical power, in dBm or mW. You can also measure optical power loss
(expressed in dB). The power loss measurement (or attenuation) compares the
measured light energy at the end of the link (output) to the reference level at
the input (the light source). This loss measurement result delivers a true
optical loss measurement for the link by subtracting the loss associated with
the fiber optic patch cables. The operator can specify the Pass/Fail limit for
loss and also the direction (A-B or B-A) of the measurement.
Generates Complete Reports through a PC or Directly to a Printer
You can
record and store any combination of copper or fiber optic Autotest reports with
the DSP Series cable testers. Each test report can be assigned a unique,
user-definable label, and can be downloaded to a PC or printed directly from the
cable tester to a serial printer. Test reports contain wavelength, measured
loss, loss limit, test direction and reference level. The fiber test results may
be saved in the tester memory using a cable name of up to 27 characters
long.
Easy to Learn and Use
The fiber test accessories complement the Fluke
instruments with the same technological leadership and ease of use that has made
Fluke an industry standard. The large, easy-to-read menus on the LCD display of
the test tools prompt the operator through each step of a fiber link test.
Product Specifications
DSP-FOM Optical Power Meter
Calibrated Wavelengths 850 nm,
1300 nm (used also for 1310 nm), and 1550 nm
Dynamic Range
+3 to -50 dBm
Measurement Accuracy ±0.25 dB at -10.0 dBm and
25°C
Display Resolution
0.01 dB (0.001 µW)
Detector Type
Germanium
Optical Adapter
ST
Operating Temperature 0° C to +40° C
Storage Temperature
-20° C to +70°
C
Dimensions
4.5 x 2.5 x 1.5 in (11.4 x 6.4 x 3.8
cm)
Weight
5.0 oz (142g)
Battery
Type
9V alkaline
Battery
Life
90 hours typical
FOS-850/1300 Optical Source
Transmit Wavelengths 850 nm and 1300
nm
Power Output
-20 dBm
Source Type
LED
Optical Adapter ST
Operating
Temperature 0° C to +40° C
Storage Temperature -20° C to +70°
C
Dimensions
4.5 x 2.5 x 1.5 in (11.4 x 6.4 x 3.8 cm)
Weight
5.0 oz (142g)
Battery Type
9V alkaline
Battery
Life
24 hours typical
| 
