Fluke 99 ScopeMeter Series II 50 MHz Oscilloscope
$595.00
Availability:
Out of stock
SKU
11H63
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Request a Quote for
Fluke 99 ScopeMeter Series II
Your ScopeMeter test tool combines the capabilities of an easy-to-use digital storage oscilloscope with the versatility of a digital multimeter. When you select a measurement function, the test tool automatically chooses the best setup to analyze and compare complex waveforms, or simply to read voltage levels.
Features:
Your ScopeMeter test tool combines the capabilities of an easy-to-use digital storage oscilloscope with the versatility of a digital multimeter. When you select a measurement function, the test tool automatically chooses the best setup to analyze and compare complex waveforms, or simply to read voltage levels.
Features:
- Digital Storage Oscilloscope
- 3 2/3-digit, 5-MHz Digital MultiMeter (DMM).
- Battery power.
- Measure menu for quick setup.
- Continuous Auto Set function for hands-off signal probing.
- Large memory for front panel Setups, Waveforms, and Screens.
- Min Max TrendPlot function with time stamp for long term recording.
- Optical to RS-232 interface port, 600V isolation
- Instant Information key.
Vertical | |
Frequency Response, -3 dB | DC to >50 MHz |
AC coupled | <10 Hz direct, <1 Hz with 10:1 probe |
Coupling | AC, DC, Ground |
Rise Time | <7 ns |
Sensitivity | 1 mV to 100 V/div to 1 kV/div with 10:1 probe |
Current probe scaling | 1 mA/div to 100,000 A/div |
Modes | A, -A, B, -B, A+B, A-B, A=x B=y |
Input Impedance | 1 M?//25 pF direct, 10 M?//15 pF with 10:1 probe |
Vertical Resolution | 8 bit (256 levels) |
Accuracy | ±(2% +1 pixel), add 3% for 1 and 2 mV/div |
Horizontal | |
Modes | Recurrent, Single Shot, Roll |
Recurrent | 10 ns to 1 s/div |
Dual input alternating | 5 ns (10 ns) to 20 µs/div |
Dual input chopped | 50 µs to 1 s/div |
Single Shot | 100 ns to 1 s/div |
Dual input alternating | 100 ns to 20 µs/div |
Dual input chopped | 50 µs to 1 s/div |
Roll | 2 s to 60 s/div |
Dual input chopped | 2 s to 60 s/div |
Accuracy | +(0.1% + 1 pixel) |
Record Length | 256 or 512 samples (10 or 20 division) |
GENERAL | |
Display | Super Twisted Liquid Crystal |
Size | 84 x 84 mm (4.7" diagonal) |
Resolution | 240 x 240 pixels, 25 pixels/div. in SCOPE mode |
Contrast | User adjustable |
Backlight | Electroluminescent |
Power | |
Internal Battery Pack | NiCad 4.8V nominal |
Operating Time | Typical 4 hours |
Power Adapter/Battery Charger | Charging Time: Typical 16 hours |
Alternate battery | 4 Alkaline C cells (nonrechargable) |
External Supply | 8 to 20V DC, 5W typical via 5 mm jack |
Memory back-up battery | CR2032 |
Environmental | |
Temperature | Operating: 0 °C to 50 °C Storage: -20 °C to 70 °C |
Humidity | Operating: 20 °C to 30 °C, 90% RH noncondensing 30 °C to 50 °C, 70% RH noncondensing Storage: 95% RH |
Altitude | Operating: 3 km (10,000ft) Storage: 12 km (40,000ft) |
Shock and Vibration | per MIL-T-28800 for Class 3 |
Electromagnetic Interference | per MIL STD 461 |
Mechanical | |
Size excluding holster | 60 x 130 x 260 mm (2.4 x 5.1 x 10.2 inches) |
Size including holster | 65 x 140 x 275 mm (2.5 x 5.5 x 10.8 inches) |
Weight excluding holster | 1.5 kg (3.3 lbs) |
Weight including holster | 1.8 kg (4.0 lbs) |
Safety | |
MAX. Input voltage on INPUT A or INPUT B | 300V rms, 600V rms with 10:1 probe |
MAX. Input voltage on EXTernal input | 300 V rms |
Surge Protection | 4 kV, 6 kV with 10:1 probe per IEC 664 and ANSI/IEEE C62.41 test method |
Maximum Isolation to Earth | 600V rms from any terminal |
Optical Interface | Optically Isolated to 600V rms |
Fluke 99 ScopeMeter Series II 2 Channel 50 MHz Oscilloscope
This Fluke 99 ScopeMeter Comes With Four C Batteries In Unit
(Rechargeable Battery Pack Not Inlcuded In Sale)
Combines the capabilities of an easy-to-use digital storage oscilloscope with the versatility of a digital multimeter
Includes Carrying Case & Accessories As Listed
Scope meter
Fluke Networks 99 ScopeMeter 99ScopeMeter 50 MHz Series II Oscilloscope Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 24053M-L/T*
- Fluke 99 ScopeMeter Series II Oscilloscope (BC# 24053M-L/T*)
- (2) Fluke Voltage Probes
- (2) 1000V Hard Point Test Leads
- AC Adapter/Charger
- Hard Copy User Manual
- Carrying Case (G)