Fluke Networks CIQ-GSV2 CableIQ Test Service Kit
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
>CableIQ Qualification Tester
>At a Glance
- >Qualifies - Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
- >Troubleshoots - shows why existing cabling cannot support the network's bandwidth requirement (e.g. crosstalk at 11 meters)
- >Discovers - detects what's at the end of any cable and displays device configuration (speed/duplex/pairing)
- >Identifies unused switch ports that can be reallocated
- >Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap
- >Tests all copper cabling media: twisted-pair, coax, and audio cabling
>Product Capabilities
>The network tech's vision into cabling bandwidth >
CableIQ is the first cabling bandwidth tester for network technicians. It gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.
>Reduce escalated problems by as much as 30%
CableIQ's powerful troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a cable problem? Can the cable support the required network bandwidth? CableIQ is the only tool that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%.
>Specifications | |||||||||||||||||||||
> | |||||||||||||||||||||
|
>LinkRunner AT 1000 Network Tester
The Fluke Networks LinkRunner AT 1000 Network Auto-Tester is designed to identify and solve network connectivity problems in seconds. User defined Auto-Test provides connection verification at 10/100/1G over copper, offers cable verification, location of the nearest VLAN & switch model and much more. LinkRunner AT is IPv4 ready and will store up to 10 reports.
>IntelliTone Pro 200 Probe
>Main Features
- >IntelliTone 200 Probe locates and isolates hidden or bundled voice >data and video cables quickly and reliably >even on active networks
>Get advanced SuperVision for locating cable hidden in floors, ceilings, walls and in bundles >The IntelliToneル Pro Toner and Probe Series from Fluke Networks is the first toner and probe to offer digital and analog signaling all in one tool. That means itメs equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.
The IntelliToneル Pro Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.
The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. Complete per-pin verification of TIA568 wiring identifies the exact wire that is open, shorted or miswired. LED lights and distinctive tones clearly indicate miswires. The built-in Cablemap feature eliminates the need to carry separate tools or returning to the far-end to replace the toner with a mapper. The IntelliTone Pro 200 Kit is the all-in-one tool to locate and map Category 5 cabling even when plugged into a switch, and verify link service after moves, adds and changes.
The IntelliToneル Probe's signal selection thumbwheel lets you choose which tone type to use. Controlled LED signal indicators and audio tones simplify signal interpretation and take the guesswork out of cable location, reducing even the toughest locating problems into a few minutes' work.
IntelliTone Pro 200 Probe Includes: IntelliTone Pro 200 Probe, RJ11 and RJ 45 patch cables, lanyard, owners CD and quick start guide, and 9 volt battery.
For full Fluke Networks CIQ-GSV2 product specifications, please click here: Fluke Networks CIQ-GSV2
Fluke Networks CIQ-GSV2 CableIQ Qualification Gigabit Service Kit
CableIQ Qualification Tester, LinkRunner AT1000 Network Multimeter & Intellitone Pro 200 Probe
Copper qualification tester troubleshoots and qualifies cabling speed (10/100/1000/VoIP)
Includes Cable IQ Remotes #2-7, Carrying Case & Accessories As Listed
CIQ-GSV2 CIQGSV2 CIQ GSV2 CIQ-GSV CIQGSV CIQ GSV
Fluke Networks CIQ-GSV2 CIQGSV2 CableIQ Test Service Kit Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 14250-L/T* 14251-L/T* 14252-L/T*
- Fluke Networks CableIQ Qualification Tester (BC# 14250-L/T*)
- Fluke Networks Intellitone Pro 200 Probe w/ Software & Reference Guide (BC# 14251-L/T*)
- Fluke Networks LinkRunner AT1000 (BC# 14252-L/T*)
- Fluke Networks Cable IQ Remotes (#2-7)
- RJII To RJ345 Adapter
- (2) Ethernet Cables
- Cable IQ Getting Started Guide
- Cable IQ Version 2.0 Software
- RJ-II Patch Cable
- Coax Cable
- Accessory Case
- (2) USB PC Interface Cables
- User Manual On CD-ROM
- Hard Copy User Manual
- Carrying Case w/ Strap