Fluke DSP-FTA430 SM Fiber Modules 4 DSP-4000/4300
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Fluke FTA-430 Fiber Modules, Fluke Networks keeps its eye on the future - so you don't have to. Powerful, High Definition Diagnostics
Complete solution for testing and certifying high-speed Fiber Networks
Fluke Networks offers the most complete line of Fiber Test Adapters for testing and certifying Single mode, Gigabit and Single-Mode fiber optic cabling systems. These Fiber Test Adapters are high-performance, high-productivity fiber test options for the DSP-4000, DSP-4100 and DSP-4300 Digital Cable Analyzers.
Features:
- Test two fibers and two wavelengths simultaneously, automatically saving the test results.
- Perform bi-directional testing on both fibers under test and save results for both in one record.
- Utilize Fluke Networks' CableManager Software for comprehensive results management and report generation.
- Automatically measure length and propagation delay along with loss.
- Verify optical connectivity and determine which fibers go to which connectors at a patch panel.
- Communicate with a person on the other end of the fiber.
- Track the maximum and minimum power throughput of the test.
- Withstand drops and other mishaps that occur on the job.
DSP-FTA430 Specifications
General Specifications
Power supply: ±6 V supplied by the DSP-4000 test tool.
Temperature range: Operating: 0 ºC to +40 ºC; Storage: -10 ºC to +60 ºC
Warm-up time: 5 minutes
Humidity range: Operating: 0 % to 75 % RH, non-condensing
Storage: 0 % to 95 % RH, non-condensing
Dimensions: 3.3ﾔ x 4.6ﾔ x 1.9ﾔ (8.3 cm x 11.6 cm x 4.7 cm)
Weight: 7.6 oz (215 g)
Optical Transmitter
Connector: SC, multimode
Emitter type:
FTA420 - Multimode LED
FTA430 - Singlemode laser
FTA440 - 850 nm Vertical Cavity Surface Emitting Laser (VCSEL);
1310 nm FP laser
Wavelengths:
FTA420 - 850 nm and 1300 nm
FTA430 - 1310 nm and 1550 nm
FTA 440 - 850nm and 1310 nm
Power output:
FTA420 -20 dBm (10 mW), typical (into 62.5/125 mm fiber)
FTA430 and FTA440 -10 dBm
Power output stability (8 hours): ±0.25 dB at 23 °C
Optical Receiver
Power measurement accuracy: ±0.25 dBm at 23 °C, 45 % RH to 75 % RH, -20
dBm for 850 nm and 1300 nm, -10 dBm for 1550 and 1625 nm
Connector: SC, multimode or singlemode
Detector type: InGaAs
Calibrated wavelengths: 850 nm, 1300 nm, 1310 nm, 1550 and 1625 nm.
Power measurement range: +3 dBm to -50 dBm
Power measurement linearity: ±0.25 dB at 23 °C
Length Measurement:
Measured in Loopback Mode
FTA420 - 5000 meters of 62.5 um multimode cable
FTA430 - 10000 meters of singlemode cable
FTA440 - 5000 meters of 50.0 um multimode cable
Length measurement accuracy: ±1.5 m plus 2 % of length
|
DSP-FTA430 |
SingleMode Fiber Test Adapter Uses LED light sources at 1310 nm and 1550 nm wavelenghts
|
For full Fluke Networks DSP-FTA430 product specifications, please click here: Fluke Networks DSP-FTA430
Fluke Networks DSP-FTA430 SingleMode Fiber Modules
For Fluke Networks DSP 4000, 4100 & 4300 Digital Cable Analyzers
This Sale Is For Modules Only. Cable Analyzers Not Included.
Fluke Networks DSP-FTA430 DSPFTA430 SM Fiber Module Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 9058A-L/T* 9058B-L/T*
- (2) Fluke Networks DSP-FTA430 Singlemode Fiber Test Adapters (BC# 9058A-L/T* 9058B-L/T*)
- (2) SM SC-SC Fiber Cables