Fluke DTX-CERTIFIBER-M MM Fiber Optic Certifier

 Fluke Networks DTX-CLT Certifiber MM fiber Certifier
The DTX-CLT CertiFiber® Optical Loss Test Set allows you to accurately certify two fibers concurrently over two wavelengths according to custom requirements or established industry specifications. Quickly and efficienty conduct troubleshooting with a conveniently integrated Visual Fault Locator (VFL).

Fast and easy fiber certification
Using the same platform and interface as the renowned DTXﾙ CableAnalyzer, the DTX-CLT CertiFiber® Optical Loss Test Set certifies fiber according to industry standards by quickly providing four measurements on two fibers and returning a PASS/FAIL result ﾖ without having to take the time to swap the main and remote units as you would have to with traditional test sets. Such speed and efficiency in testing can easily save you more than 100 hours per year! Also, unlike most competing OLTS, the DTX-CLT CertiFiber actually measures fiber length for you, ensuring that you do not have to rely on often undependable sheath labeling or pacing methods.

Integrated troubleshooting capability
Occasional failures are a reality in testing. The DTX-CLT CertiFiberﾒs on-board VFL helps you to quickly troubleshoot basic causes of failures such as breaks and macrobends. The bright laser VFL can easily highlight near-end fiber faults in addition to verifying polarity and continuity.

Professional documentation reporting
Test reports are often required as proof of quality. Use LinkWare to upload and manage test results from Fluke Networksﾒ family of industry-leading copper and fiber cabling testers including the DTXﾙ CableAnalyzer, OptiFiber® OTDR, and SimpliFiber Pro® Optical Power Meter and Fiber Test Kits.

Features:

• 12-second Autotest ﾖ loss measurement of two fibers at two wavelengths, optical link budget calculation, and a PASS/FAIL analysis
• Fast and professional test result documentation via the widely-used LinkWare reporting software
• Optimized for applications ranging up to 10-Gig
• Interchangeable multimode and singlemode modules (which are also compatible with the popular DTXﾙ CableAnalyzer)
• Accurate fiber length measurement eliminate haphazard guessing
• Continuity and polarity verification
• Easy-to-use and widely-recognized DTX-based interface
• On-board VFL to locate fibers and breaks
• Speedy testing with FINDFIBER, MONITOR, single and bidirectional test features
• Supports various small form factor (SFF) fiber connectors

Specifications:

Optical Specifications (23°C)
Input (Meter) connectors	Removeable adapter on fiber optic power meter (input port). Removable SC adapter standard with product. Optional removable adapters: LC, ST and FC
Output (Source) connectors	Fixed SC adapter
Source type and nominal wavelength	DTX-MFM2: 850 nm LED and 1300 nm LED DTX-GFM2: 850 nm VCSEL and 1310 nm FP laser DTX-SFM2: 1310 nm FP laser and 1550 nm FP laser
Source power	DTX-MFM2: = -20 dBm, DTX-SFM2: = -7 dBm
Length measurement	DTX-MFM2: = 5,000 m of 62.5 or 50 µm fiber DTX-GFM2: = 5,000 m of 62.5 or 50 µm fiber DTX-SFM2: = 10,000 m of 9 µm singlemode fiber
Power meter type	InGaAs detector
Power measurement range	0 to -60 dBm (1310 nm and 1550 nm) 0 to -52 dBm (850 nm)
VFL Specifications (23ºC)
Laser type and nominal wavelength	Class II CDRH, 650 nm
Output modes	Continuous wave and flashing mode
Connector adapter	2.5 mm universal
Environmental Specifications
Operating temperature	0ºC to 40ºC
Storage temperature	-20ºC to 60ºC
Safety	CE, CSA, EN 61010-1
General Specifications
Dimensions (L x W x D), nominal	4.2ﾔ x 3.0ﾔ x 1.1ﾔ (106 mm x 76 mm x 28 mm)
Weight, nominal	0.31 lb (0.14 kg)

For full Fluke Networks DTX-CERTIFIBER-M product specifications, please click here: Fluke Networks DTX-CERTIFIBER-M Specs

Fluke Networks CertiFiber DTX-CLT Main Unit & Remote w/ DTX-MFM2 MultiMode Modules
Multimode Fiber Optic Certifier

Certifies fiber according to industry standards by quickly providing four measurements on two fibers and returning a PASS/FAIL result – without having to take the time to swap the main and remote units as you would have to with traditional test sets

Optimized for applications ranging up to 10-Gig

Includes Carrying Case & Accessories As Listed

DTX CLT DTX MFM2

Fluke Networks DTX-CERTIFIBER-M DTXCERTIFIBERM MM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 6314A 6314B 28951 28950

• Fluke Networks Certifiber DTX-CLT Main Unit (BC# 6314A)
• Fluke Networks Certifiber DTX-CLT Remote Unit (BC# 6314B)
• Fluke Networks DTX-MFM2 MM Module w/ VFL (BC# 28951)
• Fluke Networks DTX-MFM2 MM Module w/ VFL (BC# 28950)
• DTX-CLT Getting Started Guide
• (2) Headset / Talksets
• (2) MM SC-SC Fiber Cables
• LinkWare Version 6.1 Software
• (2) AC Adapter/Chargers
• (2) Power Cords
• USB PC Interface Cable
• User Manual On CD-ROM
• Carrying Case w/ Strap

Having trouble viewing this file? Click this link to download