Fluke Networks DTX-PC6AS Patch Cord Adapter
$0.00
Availability:
Out of stock
SKU
1H273
Condition: Refurbished
Warranty: 90 Day Exchange
Request a Quote for
Fluke Networks DTX-PC6AS
DTX Patch Cord Test Adapter Set for Category 6A patch cords. Certifies both shielded and unshielded category 6A patch cords per ISO 11801:2010.
Test the weakest link – quickly, easily, and cost-effectively
Strict new requirements and the high data-rate demands of applications now running on Cat 5e/Class D, to Cat 6/Class E and Cat 6A /Class EA cabling systems make testing and certification for patch cord performance more critical than ever. Now it’s easy to do – with the DTX Patch Cord Test Adapter Series from Fluke Networks. Simply plug the rugged, compact adapters into your DTX Cable Analyzer, and you’ve got the high-speed, fully-automated tester you need to ensure that your cords meet patchcord test requirements: bit errors rates, increase channel throughput, improve systems performance margins and reduce network downtime.
Maximize network performance with patch cords that meet industry standards
Patch cords are a common, but often overlooked drag on network performance. From the start, not all of them are created equal; performance of new patch cords is inconsistent. Most cords are only tested for wire map, not performance – in spite of what may be indicated on the jacket. Channel certification shows the performance of the completed end-to-end link including equipment and work area patch cords. Permanent Link certification shows the true performance of the installed link without the cords. This is very common because it’s the most practical and accurate way to certify new cabling links, but it is dependent on compliant patch cords. Patch Cord certification can quickly determine whether a patch cord meets industry performance specifications. When non-compliant cords are used, they can cause intermittent failures that can result in network downtime and warranty claims.
Eliminate the risk of using faulty patch cords
As new standards require more sophisticated patch cord testing, simple continuity or wiremap tests don’t measure up. With the touch of a key, Fluke Networks’ high-speed Patch Cord Test Adapter Series keeps you on top ofnew technology and industry requirements, making it easy to:
Test patch cords as easily as cabling links
Testing patch cords to component specifications is a very complex process that is typically done by laboratory engineers from the best cabling companies in the world. But it needn’t be difficult or time consuming. With the DTX Patch Cord Adapters, you can quickly perform patch cord testing in the field without any special training.
Sophisticated patch cord testing made simple
Having low-performing patch cords on a high-speed network is like putting shopping cart wheels on a racing car you simply can’t get the performance you’ve paid for. Fluke Networks’ DTX Patch Cord Test Adapter Series gives you a fast, cost-effective way to verify whether your patch cords meet industry performance specifications and support high-speed network demands.
Measurement accuracy
The DTX is independently verified for Level II, Level III, Level IIIe, Level IV measurement accuracy. That means that it meets the guidelines for testing Category 5e, 6, 6A patch cords.
Specifications:
For full Fluke Networks DTX-PC6AS product specifications, please click here: Fluke Networks DTX-PC6AS
DTX Patch Cord Test Adapter Set for Category 6A patch cords. Certifies both shielded and unshielded category 6A patch cords per ISO 11801:2010.
Test the weakest link – quickly, easily, and cost-effectively
Strict new requirements and the high data-rate demands of applications now running on Cat 5e/Class D, to Cat 6/Class E and Cat 6A /Class EA cabling systems make testing and certification for patch cord performance more critical than ever. Now it’s easy to do – with the DTX Patch Cord Test Adapter Series from Fluke Networks. Simply plug the rugged, compact adapters into your DTX Cable Analyzer, and you’ve got the high-speed, fully-automated tester you need to ensure that your cords meet patchcord test requirements: bit errors rates, increase channel throughput, improve systems performance margins and reduce network downtime.
Maximize network performance with patch cords that meet industry standards
Patch cords are a common, but often overlooked drag on network performance. From the start, not all of them are created equal; performance of new patch cords is inconsistent. Most cords are only tested for wire map, not performance – in spite of what may be indicated on the jacket. Channel certification shows the performance of the completed end-to-end link including equipment and work area patch cords. Permanent Link certification shows the true performance of the installed link without the cords. This is very common because it’s the most practical and accurate way to certify new cabling links, but it is dependent on compliant patch cords. Patch Cord certification can quickly determine whether a patch cord meets industry performance specifications. When non-compliant cords are used, they can cause intermittent failures that can result in network downtime and warranty claims.
Eliminate the risk of using faulty patch cords
As new standards require more sophisticated patch cord testing, simple continuity or wiremap tests don’t measure up. With the touch of a key, Fluke Networks’ high-speed Patch Cord Test Adapter Series keeps you on top ofnew technology and industry requirements, making it easy to:
- Quickly verify whether a patch cord is fully compliant with the Cat 6A performance standards.
- Check legacy patch cords to isolate faulty cords that could be degrading network performance and may contribute to network downtime.
- Test patch cords to make sure you’re getting the premium performance you are paying for
- Reduce the error rate of advanced applications that use multiple-pair transmission schemes and bidirectional communication on the same pair(s).
Test patch cords as easily as cabling links
Testing patch cords to component specifications is a very complex process that is typically done by laboratory engineers from the best cabling companies in the world. But it needn’t be difficult or time consuming. With the DTX Patch Cord Adapters, you can quickly perform patch cord testing in the field without any special training.
Sophisticated patch cord testing made simple
Having low-performing patch cords on a high-speed network is like putting shopping cart wheels on a racing car you simply can’t get the performance you’ve paid for. Fluke Networks’ DTX Patch Cord Test Adapter Series gives you a fast, cost-effective way to verify whether your patch cords meet industry performance specifications and support high-speed network demands.
Measurement accuracy
The DTX is independently verified for Level II, Level III, Level IIIe, Level IV measurement accuracy. That means that it meets the guidelines for testing Category 5e, 6, 6A patch cords.
Specifications:
| General Specifications | |
| The DTX Patch Cord Test Adapter Series is designed to test TIA Category 5e, 6, and ISO/IEC Category 5, 6 and 6A patch cords. Each Patch Cord Test Adapter set contains two adapters: one to be connected to the main unit, the other to be connected to the remote unit. All patch cord adapters can test unshielded or shielded patch cords. |
|
| Parameters Tested | |
| Wire map to ensure that the wire pairs are properly connected Resistance, propagation delay, length and delay skew (One way) near-end crosstalk (NEXT), and (one way) return loss |
|
| Pass/Fail Limits | |
| The patch cord test database contains pass/fail limits as specified in: |
|
| The patch cord test database contains test limits for the following patch cord lengths: | 0.5 m, 1 m, 1.5 m, 2 m, 2.5 m, 3 m, 4 m, 5 m, 7.5 m, 10 m, 15 m and 20 m >20m Cat 5e only to support TIA 1005 |
For full Fluke Networks DTX-PC6AS product specifications, please click here: Fluke Networks DTX-PC6AS
Fluke Networks DTX-PC6AS / MN Cat6a Patch Cord Adapter
Works With DTX-1200 & DTX-1800 Digital Cable Analyzers
(Cable Analyzers Not Included In Sale!)
DTX Patch Cord Test Adapter Set for Category 6A patch cords. Certifies both shielded and unshielded category 6A patch cords per ISO 11801:2010
DTX1800 DTX1200 DTX 1800 1200 DTXPC6S DTX PC6S
Fluke Networks DTX-PC6AS DTXPC6AS Patch Cord Adapter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 25869
- Fluke Networks DTX-PC6AS / MN Cat6a Patch Cord Adapter (BC# 25869)