Fluke Networks LinkRunner & MicroScanner Test Kit
Condition: Refurbished
Warranty: 90 Day Exchange
Fluke Networks LinkRunner Network Multimeter
At a Glance :
- Link : Determine whether the drop is active, identify its speed, duplex capabilities and service type-10/100/1000 Mbps.
- Ping : Verify connectivity to key devices.
- Cable verification : Multiple tests help you quickly determine if cable is the problem.
- Cable identification : Document unmarked segments, saving you hours of troubleshooting time.
- Improved efficiency : Speed up the escalation process by identifying physical or link layer problems.
Product Capabilities :
- An essential, personal tool to quickly verify network connectivity and availability.
- As networks run faster and become more complex, infrastructure cabling and devices must operate to precise levels in a tighter performance window.
- As a result, nearly 80% of network problems stem from simple wiring and connection problems.
- Front-line technicians are the first line of defense against problems in the physical and link layers of the network.
- LinkRunner improves your troubleshooting and escalation accuracy by helping you to quickly identify if a problem is the network or the PC NIC.
Fluke Microtest MicroScanner 10/100 Cable Verifier
Product Capabilities
"The essential all-in-one network tester"
The Microscanner TDR checks length, wiremap, continuity, opens, shorts and crossed and split pairs.It also generates multiple tones for use with a cable tracer. The optional office identifier kit is used when patch panel prots or wall jacks are unmarked.
The Microscanner Toner function allows to generate tones to locate hidden cables in walls, ceilings; or identify one in a bundle. An optional probe such as our Intellitone or equivalent is required to detect the tones.
Specifications:
Power Source
- Battery: 9-Volt alkaline battery
- Low battery: Low battery indication on display
- Operating Temperature: 0° to 50° C (32° to 122° F)
- Storage Temperature: -10° to 55° C (14° to 131° F)
- Humidity: 10 to 90% non-condensing User Interface
- Display: Custom LCD, 1.75” x .85”
- Keypad: 4 button keypad
- Shielded and Unshielded Twisted Pair cable
- Main: Modular 8 connector for length, wire map, office identifier, toner
- Loopback: Modular 8 connector used for patch cable wire map
- Measures length on all 4 pairs and displays in feet or meters Checks for opens, shorts and connections to a HUB (10BaseT / Token Ring)
- Maximum length: 1500 ft. (457m)
- Resolution: 1 ft.
- Modes:
- User Selectable NVP
- NVP Calculation based on known cable length:
- Minimum length: 50 ft. (15 m)
- Maximum length: 1500 ft. (457m)
- Wiremap checks end-to-end continuity on all four wire pairs (Wiremap adapter required)
- Opens
- Shorts
- Reversed pairs
- Swapped pairs
- Split pairs
- Distance Maximum length: 656 ft. (200 m)
Identify cable links from the wiring closet to the office using the optional Office Identifier plugs
- 12 passive test plugs attached to far end (identified as 1 through 12)
- Requires minimum 12/36 or 36/45 pairs in cable
- Distance Maximum length: 656 ft. (200 m)
Generate audible frequency tones detectable by standard tracer probes
- Frequency: User may select 1 of 4 predefined tone sequences
- Interface: Main Mod8 port for tone generation on all 4 pairs. Ground jack provided for grounding MICROSCANNER during trace operations.
- The test interface withstands input hazard conditions that arise from normal telephone interfaces (48 VDC at less than 80 mA) or 24 VAC power used to power many telephone keysets.
Includes:
- Fluke Networks LinkRunner Network Multimeter
- Fluke Microtest MicroScanner 10/100 Cable Verifier
- Fluke Networks Intellitone Pro 100 Probe
- Fluke Networks TS19 Butt Set
- Fluke Networks LinkRunner WireMap
- (6) RJ45 To Male Coax Cable Identifiers
- (2) RJ45 to Female Coax Cable Identifier
- Microscanner WireMap Adapter
- (2) Cat6 Patch Cables
- User Manual On CD-ROM
- Carrying Case
For full Fluke Networks LInkRunner product specifications, please click here: Fluke Networks LinkRunner
Fluke Networks LinkRunner - Network Multimeter & WireMap Identifier Set
&
Fluke Microtest MICROSCANNER 10/100 Wire Map Cable Verifier
Fluke Networks LinkRunner MicroScanner Link-Runner Micro-Scanner Network Tester Kit Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.