Fluke OneTouch 10/100 MM Fiber Network Testers

In todayﾒs switched, Fast Ethernet and TCP/IP environments, network technicians are faced with the usual challenging problems ﾗ congestion, server access, errors and port identification. With the One Touch Network Analyzer, you are one touch away from solving complex network problems.

Features:

• Verifies connectivity to a list of user-defined devices, including routers, servers and switches
• Discovers switch information and maps devices to individual switch ports
• Pinpoints duplicate IP addresses on your network with a single touch
• Troubleshoots network problems with remote monitoring and control via a Web browser
• Identifies cable length, opens, crossed wires and split pairs
• Identifies network connections that are not currently used by desktop connections

Power Meter Specifications

Output:	1 mV per 1 dB
Input Connector Type:	Fixed ST
Photodetector Type:	Germanium
Application Range:	800 to 1600 nm
Calibrated wavelengths:	850, 1300, and 1550 nm
Acceptable fiber types (sizes):	9/125 to 100/140 µm
Operating range:	+3 to -50 dBm
Maximum power level:	+5 dBm
Absolute accuracy:	±0.25 dB, (Specified at 25°C & -10.0 dBm per NIST standard)
Relative accuracy:	±0.15 dB, (Specified over any 10 dB within measurement range)
Repeatability:	±0.04 dB
Battery type:	9V alkaline, NEDA 1604A or IEC 6LR61
Battery life:	16 hours minimum, 100 hours typical, 9V alkaline
Low battery indication:	Blinking LED indicator
Operating temperature:	0 to +40°C
Storage temperature:	-20 to +70°C
Humidity:	0 to 40°C, up to 75% RH
Electromagnetic Compatibility: RF Field =1 V/m RF Field = 3 V/m	Total Accuracy = Specified Accuracy Specified Accuracy + 2.5 dB

Source (850, 1300, 850/1300) Specifications

Type:	Infrared LED
Wavelength:	850 ± 30 nm 1300 ± -40/+50 nm 850/1300 ± 30 nm, -40/+50 nm
Output power:	-20 dBm, nominal into 62.5/125 micron multimode fiber
Output connector type:	Fixed ST
Beam divergence:	0.3 radians
Pulse duration:	Continuous wave
Maximum output:	200 µW (radiated into free space)
Stability:	±0.2 dB per 8 hours at 20°C after 20 minute warmup
Temperature coefficient:	-0.08 dB per °C, < 18°C or > 28°C
Battery type:	9V alkaline, NEDA 1604A or IEC 6LR61
Battery life:	16 hours minimum, 24 hours typical, 9V alkaline
Low battery indication:	Blinking LED indicator
Operating temperature:	0 to +40°C
Storage temperature:	-20 to +70°C
Humidity:	0 to 40°C, up to 75% RH

Includes:

• Fluke Networks OneTouch 10/100 Network Assistant w/ Fiber Option
• Fluke FOM Fiber Optic Meter
  • 850nm
  • 1300nm
  • 1550nm
• Fluke FOS Fiber Optic Source
  • 850nm
  • 1300nm
• Fluke Cable Identifier
• Cat5e Patch Cable
• (2) MM ST-ST Fiber Cables
• ST-ST Fiber Connector
• Battery Pack
• AC Adapter/Charger
• Power Cord
• RS-232 PC Interface Cable
• Fluke Getting Started Guide On CD-ROM
• User Manual On CD-ROM
• Hard Case For Fiber Testers
• Carrying Case

Fluke Networks OneTouch 10/100 Network Assistant
With Multimode 850nm/1300nm Fiber Test Option:
Power Meter
- 850nm
- 1300nm
- 1550nm
Source
- 850nm
- 1300nm

Troubleshoot Network Connections & Perform 10BASE-T and 100BASE-TX Length, Wiremap & Split Pair Cable Tests.

Fluke OneTouch One-Touch MM Network Assistant Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.