Fluke i400s AC Current Clamp Probe Set Of 4
$1,295.00
Availability:
Out of stock
SKU
11H66
Condition: Refurbished
Warranty: 90 Day Exchange
Request a Quote for
Fluke i400s AC Current Clamp
The i400s is compatible with any instrument capable of ac millivolt measurements. It can accpet a standard BNC connector, and has an input impedance of greater than or equal to 1 MO in parallel with a maximum of 47 pF. The current Clamp can also be used with digital multimeters using a BNC-to-banana jack adapter.
Features:
For full Fluke i400s Set product specifications, please click here: Fluke i400s Set
The i400s is compatible with any instrument capable of ac millivolt measurements. It can accpet a standard BNC connector, and has an input impedance of greater than or equal to 1 MO in parallel with a maximum of 47 pF. The current Clamp can also be used with digital multimeters using a BNC-to-banana jack adapter.
Features:
- Companion to your scope or power quality meter to measure up to 400 A AC
- Only current clamp available with a CAT IV 600 V / CAT III 1000V safety rating
- Specially designed to offer maximum utility in a compact shape
- Take accurate current readings without breaking the circuit
- Soft non-slippery overmold handle
- Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
- Max. conductor 32 mm
| Nominal current range: | 40 A Range: 0.5 A to 40 A 400 A Range: 5 A to 400 A |
| Basic accuracy: | 40 A Range: 2% + 0.015 A (45-400 Hz) 400 A Range: 2% + 0.04 A (45-400 Hz) |
| Phase Shift: | 40 A Range 0.5 to 1 A Unspecified 1 A to 5 A 4° 5 A to 10 A 3° 10 A to 20 A 3° 20 A to 40 A 2° 40 A to 400 A NA 400 A Range 0.5 to 1 A NA 1 A to 5 A NA 5 A to 10 A Unspecified 10 A to 20 A 2° 20 A to 40 A 2° 40 A to 400 A 1.5° |
| Typical Bandwidth: | 40 A Range: 5 Hz - 10 kHz 400 A Range: 5 Hz - 10 kHz |
| Output level(s): | 40 A Range: 10 mV/A 400 A Range: 1 mV/A |
| Crest Factor: | 40 A Range: = 3 400 A Range: = 3 to 300 A = 2.5 to 400 A |
| Safety Specifications | |
| Safety | CAT IV 600 V, CAT III, 1000 V |
| Maximum Non-Destructive Current | 1000 V AC |
| Mechanical & General Specifications | |
| Maximum condcutor size | 32 mm (1.25 inches) |
| Output cable length | 2.5 m (8.2 ft) |
| BNC Adapter | Yes |
| Dimensions | 150 x 70 x 30 mm |
| Weight | 114 g |
For full Fluke i400s Set product specifications, please click here: Fluke i400s Set
Fluke i400s Set of 4 AC Current Clamps
Compatible with any instrument capable of ac millivolt measurements
i 400s i-400s
Fluke i400s i-400s AC Current Clamp Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
- (4) Fluke i400s AC Current Clamps