Fujikura FSM-40S B kit with accessories

Fujikura FSM-40S B SM MM Fusion Splicer w/ Cleaver

Wavetek SDA-5000 kit with accessories

Wavetek Acterna SDA-5000 Option 1 & 2 CATV Meter

Fujikura FSM-50S SM MM Fusion Splicer With Cleaver

$3,509.00
Availability: In stock
SKU
2i13

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

This is a new standard of core to core aligning arc fusion splicer.

A number of improvements have been added to the performance-proven Profile Alignment System (PAS) platform, resulting in the smallest and lightest package of its kind. With improved splice & tube-heat time, the splicing operation is the world's fastest truly optimized for field use. Other valuable features include an ergonomic design, reduced numbers of operating steps and a powerful battery extend the boundaries of traditional field fusion splicing performance. The movable monitor and dual-direction operating system essentially gives the operator a choice of two splicers. With these features, the FSM-50S is now more than a tool, it is a work of art.

Features

  • Fully automatic core alignment with 9 second splice time for SM fiber
  • Reduced splice protector shrink time ヨ now only 35 seconds
  • Extremely compact and lightweight ヨ just 2.8kg
  • Automatic fibre type identification
  • Multi-position monitor for front or top mounting
  • High capacity battery option for 120 splice/shrink cycles
  • Real time arc calibration
  • Fibre clamps integrated into wind protector to reduce operation time

Dual-directional operating system

The reversible monitor accommodates the user's ergonomic preference. With a control panel on each side, the ease of use is phenomenal.

Splice time of 9 sec.

Improved computer processing and newly introduced stepping motor help achieve 9 sec. splice time with SM fiber.

Tube-heat time of 35 sec.

Advanced heater design shortens tube-heat time to 35 sec. with FP-03 protection sleeve.

Large capacity battery option

Two types of slot-in batteries BTR-06S and BTR-06L are available.

Arc calibration-free system

Time-consuming arc calibration is no longer requried with real- time arc calibration.

 

Specifications:

Applicable fibers SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU -T G.653), NZDS(ITU-T G.655)
Fiber Count Single
Cladding diameter 80 to 150μm
Coating diameter 100 to 1000μm
Fiber cleaved length 8 to 16mm with coating diameter of 250μm or less. 16mm with coating diameter of 250 to 1000μm. Optional set-plate for 8 to 16mm with coating diameter of 250 to 1000μm is available.
Actual average splice loss 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards.
Splice time Typical 9sec. with standard SM fiber
Return loss >>60dB
Splicing modes 40 user programmable modes and up to 60 modes for reference(factory predetermined setting)
Splice loss estimate Available
Attenuation splice function Intentional high splice loss of 0.1dB to 15dB(0.1dB step)can be made for an in-line fixed attenuator.
Storage of splice result The last 2000 results to be stored in the internal memory
Fiber display X / Y, or both X and Y simultaneously
Magnification 295x for single X or Y view, or 147x for X and Y view.
Viewing method Two CMOS cameras and 5.6 inch color LCD monitor.
Operating condition 0 to 5000m above sea level, 0 to 95% RH and -10 to 50 respectively.
Mechanical proof test 2N(standard)/ 4.4N(option)
Tube heater Built - in tube heater with 10 heating modes and up to 20 modes for reference
Tube heat time Typical 35sec. with FP-03 protection sleeve
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves
No.of splice/heating with battery Typical 80 cycles with BTR-06(S)/ Typical 160 cycles with BTR-06(L)
Power supply Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-11. 13.2Vd.c. with BTR-06(S / L).
Terminals USB 1.1(USB-B type)for PC communication. Video terminal RCA video jack / NTSC
Wind protection Max. wind velocity of 15m/s
Dimensions 150W x 150D x 150H (mm)
Weight 2.3kg(2.8kg including AC adapter ADC-11)




For full Fujikura FSM-50S product specifications, please click here: Fujikura FSM-50S

Fujikura AFL FSM-50S Singlemode & Multimode Core Alignment Fusion Splicer

Fully automatic core alignment with 9 second splice time for SM fiber!

Includes 6 Month Fusion Splicer Care Kit (FS6MC)
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs

Includes USFiberOptic USF-21C Precision Fiber Cleaver, Hard Carrying Case & Accessories As Listed

FSM 50S FSM50S

Fujikura FSM-50S FSM50S Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 44979-L/T*

  • Fujikura FSM-50S Arc Fusion Splicer (BC# 44979-L/T*)
  • US Fiber Optic USF-21C High Precision Fiber Cleaver
  • Clauss CFS-2 Fiber Optic Stripper
  • 6 Month Fusion Splicer Care Kit FS6MC:
    • 4oz Flip Jar Of 99% Alcohol
    • (50) Non-Lint Dry Wipes
    • (6) Fiber Optic Wipes w/ 99% Alcohol
    • 2oz Pump Fast Evaporating Mirror Spray
    • (25) Camera Swabs
    • (4) V-Groove Swabs
  • Fujikura ADC-11 AC Adapter
  • Power Cord
  • USB PC Interface Cable
  • Hard Copy User Manual
  • Hard Carrying Case (G)
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!