Fujikura FSM-60R12 SM MM Ribbon Fusion Splicer
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
- Up to 12-fiber ribbon splicing.
- Cladding alignment with fixed v-grooves.
- Environmental resistant features.
- Arc calibration-free system.
- 4.1" TFT color LCD monitor.
- Dual directional operation system.
- Long life battery.
SPECIFICATIONS:
Applicable type of fibers | SMï¼ネITU-T G.652ï¼ノ, MMï¼ネITU-T G.651ï¼ノ, DSï¼ネITU -T G.653ï¼ノ, NZDSï¼ネITU-T G.655ï¼ノ |
Fiber count | Single, 2, 4, 5, 6, 8, 10 and 12 |
Applicable fiber dimensions | Ribbon : Cladding diameter 125μm, Ribbon fiber thickness 0.25 to 0.4mm Single : Cladding diameter 125μm, Coating diameter 250μm and 900μm |
Fiber cleaved length | 10mm |
Splicing modes | Total 100 modes |
Typical splice loss | 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS. ï¼ネMeasured by cut-back method relevant to ITU-T standardï¼ノ. |
Return loss | >>60dB |
Splicing time | Typical 20sec. with standard SM ï¼ネITU-T G.652ï¼ノ |
Splice loss estimate | Available |
Tube heater / heating time | Built-in tube heater with 30 heating modes. / Typical 40sec with Fujikura FP-04T and 50sec with FP-05. |
Applicable protection sleeve | 60mm, 40mm and Fujikura FPS01 series |
Storage of splice result | The last 2000 results to be stored in the internal memory. |
Tension test | 1.96 to 2.25N |
Operating condition | 0 to 3660m above sea level, 0 to 95%RH and -10 to 50 degC and up to 15m/s wind velocity, respectively. |
Storage condition | 0 to 95%RH and -40 to 80 degC respectively. Battery : -20 to 30 degC for long term. |
Dimensions | 136WÃラ161DÃラ143Hï¼»mmï¼½ excluding rubber foot. |
Weight | 2.1kg with AC adaptor ADC-13, 2.5kg with battery BTR-08. |
Viewing method and display | Two CMOS cameras and 4.1" color LCD monitor. |
Fiber view and magnification | X / Y ï¼ネ35X magnification), or both X and Y simultaneously ï¼ネ35X magnificationï¼ノ. Changeable 35X to 90X. |
No.of splice cycles with battery | Typical 90 cycles ï¼ネsplice / tube heatï¼ノ with BTR-08. |
Power supply | Applicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-13. 13.2V DC with BTR-08. |
Electrode life | 1000 arc-discharges |
Terminals |
USB 1.1 ï¼ネMini-B typeï¼ノ connector for PC communication. |
For full Fujikura FSM-60R product specifications, please click here: Fujikura FSM-60R
Fujikura FSM-60R12 Singlemode & Multimode Single Fiber & Ribbon Fiber Fusion Splicer
Up To 12-fiber Ribbon Splicing.
Includes 6 Month Fusion Splicer Care Kit (FS6MC)
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
Includes High Precision Fiber Cleaver, Hard Carrying Case & Accessories As Listed
FSM-60 FSM60R FSM 60R FSM 60R12 FSM60R12
Fujikura FSM-60R12 FSM60R12 Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 39112-L/T*
- Fujikura FSM-60R12 Single & Ribbon Fiber Fusion Splicer (BC# 39112-L/T*)
- Fujikura CT-20 High Precision Fiber Cleaver w/ Case
- Fujikura HJS-02 Hot Jacket Stripper w/ DC Cord
- Clauss CFS-2 Fiber Stripper
- 6 Month Fusion Splicer Care Kit FS6MC:
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
- Fujikura ADC-13 AC Adapter
- Power Cord
- FH-50-12 Fiber Holder Set
- USB PC Interface Cable
- User Manual On CD-ROM
- Hard Carrying Case (G)