The FSM-17S establishes a new standard for single fi ber “fixed v-groove”
type fusion splicers with a host of improvements including a 35 second tube
heater, dual position monitor, and a longer battery life. The real time arc
calibration feature makes field maintenance easier than ever. Also available now
is a version of the FSM-17S utilizing a fiber holder system, making the splicing
process extremely simple for inexperienced technicians. The FSM-17S is well
suited for FTTX applications and both models quickly attach to the newly
redesigned ASW-02 workstation making, field portability a breeze.
| PARAMETER |
VALUE |
| Model |
FSM-17S:
Fiber Sheath Clamp Model |
|
FSM-17S-FH:
Fiber Holder Model |
| Applicable Fibers |
SM (ITU-T
G.652), MM (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655) |
| Cladding Diameter |
125µm |
| Coating Diameter |
FSM-17S:
250µm to 1000µm |
|
FSM-17S-FH:
250µm using the FH-50-250 fiber holder or 900µm using the |
|
FH-50-900
fiber holder |
| Fiber Cleave Length |
FSM-17S: 8 to 16mm
with 250µm coating diameter. |
|
16mm with 900µmcoating diameter. |
| Typical Average Splice Loss |
0.05dB with
SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS. |
|
Measured by
cut-back method relevant to ITU-T and IEC standards. |
| Splicing Time |
Typical
11seconds with standard SM fiber |
| Arc Calibration Method |
Automatic,
using results of previous splice when in AUTO mode. Manual arc |
|
calibration
function available. |
| Splicing Modes |
40 user
programmable modes and up to 60 modes for reference (factory |
|
predetermined setting). |
| Splice Loss Estimate |
Based upon
dual camera cladding alignment data. |
| Storage of Splice Result |
The last
2000 results to be stored in the internal memory. |
| Fiber Display |
X / Y, or
both X and Y simultaneously. Front or rear monitor display options. |
| Magnification |
316x for
single X or Y view, or 158x for X and Y view. |
| Viewing Method |
Dual cameras
with 5.6 inch color LCD monitor. |
| Operating Condition |
0 to 5,000m
above sea level, 0 to 95%RH and -10 to 50 respectively. |
| Mechanical Proof Test |
2N |
| Tube Heater |
Built-in tube heater with 10
heating modes and up to 20 modes for |
|
reference. |
| Tube Heating Time |
Typical 35
seconds with FP-03 protection sleeve. |
| Applicable Protection Sleeve |
60mm, 40mm,
micro |
| Length |
|
| No.of Splice/heat With Battery |
Typical 80
cycles with BTR-06(S) / Typical 160 cycles with BTR-06(L). |
| Power Supply |
Auto voltage
selection from 100 to 240V AC or 10 to 15V DC with ADC-11. |
|
13.2V DC
with BTR-06(S)/(L). |
| Terminals |
USB 1.1
(USB-B type) for PC communication. |
|
Video
terminal RCA video jack / NTSC. |
| Wind Protection |
Max. wind
velocity of 15m/s. (34 mph) |
| Dimensions |
150W x 150D
x 150H (mm) / 5.9W x 5.9D x 5.9H (inches) |
| Weight |
2.6 kg (5.7
lbs.) including AC adapter ADC-11 |
